TUSB8041
- Four Port USB 3.0 Hub
- USB 2.0 Hub Features
- Multi Transaction Translator (MTT) Hub: Four Transaction Translators
- Four Asynchronous Endpoint Buffers Per Transaction Translator
- Supports Battery Charging
- CDP Mode (Upstream Port Connected)
- DCP Mode (Upstream Port Unconnected)
- DCP Mode Complies with Chinese Telecommunications Industry Standard YD/T 1591-2009
- D+/D- Divider Mode
- Supports Operation as a USB 3.0 or USB 2.0 Compound Device
- Per Port or Ganged Power Switching and Over-Current Notification Inputs
- OTP ROM, Serial EEPROM or I2C/SMBus Slave Interface for
Custom Configurations:
- VID and PID
- Port Customizations
- Manufacturer and Product Strings (not by OTP ROM)
- Serial Number (not by OTP ROM)
- Application Feature Selection Using Pin Selection or EEPROM/ or I2C/SMBus Slave Interface
- Provides 128-Bit Universally Unique Identifier (UUID)
- Supports On-Board and In-System OTP/EEPROM Programming Via the USB 2.0 Upstream Port
- Single Clock Input, 24-MHz Crystal or Oscillator
- No Special Driver Requirements; Works Seamlessly on any Operating System with USB Stack Support
- 64-Pin QFN Package (RGC)
The TUSB8041 is a four-port USB 3.0 hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/low-speed connections, SuperSpeed USB and high-speed connectivity are disabled on the downstream ports.
The TUSB8041 supports per port or ganged power switching and over-current protection, and supports battery charging applications.
An individually port power controlled hub switches power on or off to each downstream port as requested by the USB host. Also when an individually port power controlled hub senses an over-current event, only power to the affected downstream port will be switched off.
A ganged hub switches on power to all its downstream ports when power is required to be on for any port. The power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed. Also when a ganged hub senses an over-current event, power to all downstream ports will be switched off.
The TUSB8041 downstream ports provide support for battery charging applications by providing Battery Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated Charging Port (DCP) mode when the upstream port is not connected. The DCP mode supports USB devices which support with the USB Battery Charging and Chinese Telecommunications Industry Standard YD/T 1591-2009. In addition, an automatic mode provides transparent support for BC devices and devices supporting Divider Mode charging solutions when the upstream port unconnected.
The TUSB8041 provides pin strap configuration for some features including battery charging support, and also provides customization though OTP ROM, I2C EEPROM or via an I2C/SMBus slave interface for PID, VID, and custom port and phy configurations. Custom string support is also available when using an I2C EEPROM or the I2C/SMBus slave interface.
The device is available in a 64-pin RGC package and is offered in a commercial version (TUSB8041) for operation over the temperature range of 0°C to 70°C, and in an industrial version (TUSB8041I) for operation over the temperature range of -40°C to 85°C.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TUSB8041 Four-Port USB 3.0 Hub データシート (Rev. E) | PDF | HTML | 2017/06/23 | ||
| アプリケーション・ノート | シグナル コンディショナおよび USB ハブの高速レイアウトのガイド ライン (Rev. A 翻訳版) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2026/01/14 | |
| アプリケーション・ノート | ESD and Surge Protection for USB Interfaces (Rev. B) | PDF | HTML | 2024/01/11 | |||
| アプリケーション・ノート | Transition From USB 3.0 Hub to USB 3.1 Hub | 2017/12/06 | ||||
| 技術記事 | DisplayPort(TM) over USB Type-C(TM): One connector to rule them all | PDF | HTML | 2015/05/18 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TUSB8041EVM — 4 ポート USB 3.0 SuperSpeed ハブ評価基板
TUSB8041EVM は、USB 3.0 ハブと USB 2.0 ハブの両方を実装したシングル デバイスの機能ボード設計です。この評価基板は、搭載している USB ポートで、SuperSpeed (SS) と USB 2.0 (HS、FS、LS) 両方の動作をサポートします。この評価基板は、システム互換性の評価、オプションの EEPROM ファームウェアの開発、相互運用性の検証に使用することを意図しています。また、この評価基板は TUSB8041 の任意の実装向けハードウェア リファレンス デザインとしても使用できます。
USB-CTM-MINIDK-EVM — ビデオと充電サポート機能搭載、USB Type-C™ ミニドック ボードの評価基板
USB Type-C™ / Power Delivery (PD) ミニドック評価基板 (EVM) は、オーディオ、USB データ、電源、ビデオなどに対応する、USB Type-C ドック向けの包括的なリファレンス ソリューションを提供します。 この EVM は小型 (2 x 4 インチ) のフォーム ファクタで、USB Type-C PD 対応 1 次ポートを通じて、ソース/シンク電源機能をサポートします。ビデオ出力機能は DisplayPort と HDMI に対応しています。
TIDA-00288 — 4 ポートの USB 3.0 ハブのリファレンス デザイン
この検証済みリファレンス デザインは四個のポートを備える USB 3.0 準拠ハブです。アップストリーム ポートでは、SuperSpeed と高速度 / フルスピードの同時接続をサポートし、ダウンストリーム ポートでは SuperSpeed、高速度、フルスピード、または低速接続を提供します。このハブ設計は、各ダウンストリーム ポートの電力制御および過電流保護を提供します。
TIDA-01243 — ビデオと充電サポート機能付き USB Type-C™ とパワー デリバリ ミニドックのリファレンス デザイン
TIDEP0046 — DSP アクセラレーション用に OpenCL を使用する AM57x 上モンテカルロ シミュレーションのリファレンス デザイン
TI の高性能 ARM®Cortex®-A15 ベースの AM57x プロセッサも、C66x DSP を搭載しています。これらの DSP は、産業用、車載、財務用のアプリケーションで多くの場合必要とされる、高信号およびデータ処理タスクに対応できる設計を採用しています。AM57x OpenCL の実装により、標準のプログラミング モデルと言語を使って高い計算タスクに DSP アクセラレーションを簡単に利用できるため、DSP アーキテクチャに関する深い知識は不要になります。TIDEP0046 TI リファレンス デザインは、標準的な C/C++ (...)
TIDEP0047 — 電力と熱に関する考慮事項を示した TI の AM57x プロセッサをベースとしたリファレンス デザイン
これは、AM57x プロセッサと、それに付随する TPS659037 パワー マネージメント IC (PMIC) に基づいたリファレンス デザインです。 このデザインでは、AM57x および TPS659037 を使用して設計されたシステムの電源および熱に関する設計上の重要な検討事項と手法を特に取り上げます。 パワー マネージメントの設計、パワー ディストリビューション ネットワーク (PDN) の設計上の検討事項、熱設計上の検討事項、消費電力の推定、消費電力の概要に関する参考資料と文書が付属しています。
TIDEP0065 — エンハンスト I2C および SMbus マスタ インタフェース、リファレンス デザイン、PRU-ICSS 付
これは、プログラマブル リアルタイム ユニットおよび産業用通信サブシステム (PRU-ICSS) を備えた Sitara™ プロセッサ上での産業用通信向けリファレンス デザインです。PRU-ICSS を使用すると、リアルタイム アプリケーションの分野でカスタム ファームウェア アプリケーションを開発できます。多くのアプリケーション プロセッサが搭載している I2C ペリフェラルは、ブロック読み取り転送やブロック書き込み転送のような SMbus コマンドをサポートしていません。このリファレンス デザインは、標準的な I2C コマンドを使用して、このような SMbus コマンドを (...)
TIDEP0076 — DLP® 構造化光アーキテクチャ搭載、AM572x プロセッサ ベース 3D マシン ビジョンのリファレンス デザイン
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。