데이터시트
DCH010505S
- 3-kVDC Isolation (operational): 1-second test
- Continuous voltage applied across isolation barrier: 60 VDC / 42.5 VAC
- UL60950 certified product
- Industry standard footprint
- JEDEC 7-pin SIP package
- Input voltage: 5 V ±10%
- Output voltage: ±5 V, ±12 V, or ±15 V
- Supports series operation for higher output voltage
- Supports parallel operation for higher output power
- Up to 78% efficiency
The DCH010505, DCH010512, and DCH010515 devices are a family of miniature, 1-W, 3-kV isolated DC/DC converters. Featured in an industry standard 7-pin SIP package, the DCH01 series requires minimal external components, reducing board space. The DCH01 series provides both single and dual split-supply outputs.
The use of a highly integrated package design results in highly reliable products with high power densities. High performance and small size makes the DCH01 suitable for a wide range of applications including signal chain applications and ground loop elimination.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기2 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | Miniature, 1W, 3kV Isolated, Unregulated DC/DC Converters datasheet (Rev. J) | 2020/04/22 | |
| Technical article | Pile on to a charger – my EV needs power | PDF | HTML | 2016/12/20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TIEVM-VIENNARECT — C2000™ MCU를 사용하는 Vienna 정류기 기반 3상 역률 보정 레퍼런스 설계
The Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off-board electric vehicle (EV) chargers and telecom rectifiers. This design illustrates how to control the power stage using C2000™ MCUs. This design uses an HSEC180 controlCARD (...)
개발 키트
TIEVM-HV-1PH-DCAC — 전압 소스 및 그리드 연결 모드를 지원하는 단상 인버터 개발 키트
This reference design implements single phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is voltage source mode using an output LC filter, this control mode is typically used in Uninterrupted (...)
레퍼런스 디자인
TIDM-1000 — C2000 MCU를 사용하는 Vienna 정류기 기반 3상 역률 보정 레퍼런스 디자인
Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off board EV chargers and telecom rectifiers. Control design of the rectifier can be complex. This design illustrates a method to control the power stage using C2000™ microcontrollers (...)
레퍼런스 디자인
TIDM-HV-1PH-DCAC — 단상 인버터 레퍼런스 설계와 전압 소스 및 그리드 연결 모드
This reference design implements single-phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is the voltage source mode using an output LC filter. This control mode is typically used in (...)
레퍼런스 디자인
TIDM-02000 — C2000™ 실시간 MCU를 사용하는 피크 전류 모드 제어 위상 전환 풀 브리지 레퍼런스 설계
This design implements a digitally peak current mode controlled (PCMC) phase shifted full bridge (PSFB) DC-DC converter which converts a 400-V DC input to a regulated 12-V DC output. Novel PCMC waveform generation based on type-4 PWM and internal slope compensation, and simple PCMC implementation (...)
레퍼런스 디자인
TIDM-BIDIR-400-12 — 양방향 400V/12V DC/DC 컨버터 레퍼런스 디자인
The Bidirectional 400V-12V DC/DC Converter Reference Design is a microcontroller-based implementation of an isolated bi-directional DC-DC converter. A phase shifted full-bridge (PSFB) with synchronous rectification controls power flow from a 400V bus/battery to the 12V battery in step-down (...)
레퍼런스 디자인
TIDM-RM46XDRV8301KIT — 고성능 마이크로컨트롤러를 지원하는 3상 BLDC/PMSM 모터 드라이브 레퍼런스 디자인
This reference design describes a motor-control evaluation kit for spinning 3-phase brushless DC and brushless AC (BLAC) often referred to as permanent-magnet synchronous (PMSM) motors with example of sensorless field oriented / vector control (FOC). The implementation leverages the DRV8301 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| SIPMODULE (EDJ) | 4 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치