DRV8711
- Pulse width modulation (PWM) microstepping motor driver
- Built-In 1/256-Step microstepping indexer
- Drives external N-Channel MOSFETs
- Optional STEP/DIR pins
- Optional PWM control interface for DC motors
- Flexible decay modes, including automatic mixed decay mode
- Stall detection with optional BEMF output
- Highly configurable SPI serial interface
- Internal reference and torque DAC
- 8-V to 52-V Operating supply voltage range
- Scalable output current
- Thermally enhanced surface-mount package
- 5-V Regulator capable of 10-mA load
- Protection and diagnostic features
- Overcurrent protection (OCP)
- Overtemperature shutdown (OTS)
- Undervoltage lockout (UVLO)
- Individual fault condition indication bits
- Fault condition indication pin
The DRV8711 device is a stepper motor controller that uses external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, which is capable of step modes from full step to 1/256-step.
An ultra-smooth motion profile can be achieved using adaptive blanking time and various current decay modes, including an auto-mixed decay mode. Motor stall is reported with an optional back-EMF output.
A simple step/direction or PWM interface allows easy interfacing to controller circuits. A SPI serial interface is used to program the device operation. Output current (torque), step mode, decay mode, and stall detection functions are all programmable through a SPI serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature. Fault conditions are indicated through a FAULTn pin, and each fault condition is reported through a dedicated bit through SPI.
The DRV8711 is packaged in a PowerPAD™ 38-pin HTSSOP package with thermal pad (Eco-friendly: RoHS and no Sb/Br).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8711 Stepper Motor Controller IC datasheet (Rev. H) | PDF | HTML | 2020. 4. 22 | |
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 | ||
| 애플리케이션 노트 | Understanding Smart Gate Drive (Rev. D) | 2021. 3. 1 | |||
| 애플리케이션 노트 | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018. 7. 6 | |||
| 기술 문서 | New simple open real-time Ethernet (SORTE) protocol supports 4µs cycle time | PDF | HTML | 2016. 11. 21 | ||
| 추가 자료 | TM4C123x Stepper Motor Control Product Summary | 2015. 7. 6 | |||
| 기술 문서 | Simplifying gate driver design for brushed DC motors | PDF | HTML | 2015. 6. 30 | ||
| 기술 문서 | How to spin your stepper motor more efficiently – Part 2 | PDF | HTML | 2015. 5. 22 | ||
| 기술 문서 | How to spin your stepper motor more efficiently, Part 1 | PDF | HTML | 2015. 5. 7 | ||
| 애플리케이션 노트 | DRV8711 Decay Mode Setting Optimization | 2014. 2. 26 | |||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004. 5. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOST-DRV8711 — DRV8711 및 CSD88537ND를 제공하는 스테퍼 모터 부스터팩
The BOOST-DRV8711 is 8-52V, 4.5A, bipolar stepper motor drive stage based on the DRV8711 Stepper Motor Pre-driver and CSD88537ND Dual N-Channel NexFETTM Power MOSFET. The module contains everything needed to drive many different kinds of bipolar stepper motors and can also be repurposed as a dual (...)
DRV8711EVM — 온칩 1/256 마이크로스테핑 인덱서를 지원하는 스테퍼 모터 프리드라이버용 평가 모듈
The DRV8711 is a stepper motor controller using external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, supporting up to 1/256 microstep. The DRV8711 is capable of providing ultra-smooth motion profile, and motor stall can be (...)
SLVC500 — DRV8711 Software
TIDA-00740 — 자동 토크 구현 레퍼런스 디자인
The TIDA-00740 is an 8-52V, 4.5A, bipolar stepper motor drive stage based on the DRV8711 Stepper Motor Pre-driver and CSD88537ND Dual N-Channel NexFET™ Power MOSFET. Firmware on an MSP430G2553 is used to automatically adjust the stepper motor current based on the Back-EMF generated by the (...)
TIDA-00872 — 양극 스테퍼 모터 컨트롤러를 사용한 단극 스테퍼 모터 드라이버 레퍼런스 디자인
TIDA-00872는 단극 스테퍼 모터 게이트 드라이버로 DRV8711 양극 스테퍼 모터 게이트 드라이버를 재구성하는 방법을 보여줍니다. PCB는 MSP430G2 LaunchPad에 연결되어 빠른 평가 및 튜닝이 가능합니다. PCB는 15V~40V로 작동하며 풀 스케일 전류는 5A입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCP) | 38 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.