INA333-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C ≤ T A ≤ +125°C
- Functional Safety-Capable
- Low offset voltage: 25 µV (maximum), G ≥ 100
- Low drift: 0.1 µV/°C, G ≥ 100
- Low noise: 50 nV/√ Hz, G ≥ 100
- High CMRR: 96 dB (minimum), G ≥ 10
- Low input bias current: 280 pA (maximum)
- Supply range: 1.8 V to 5.5 V
- Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
- Output range: (V–) + 0.05 V to (V+) – 0.05 V
- Low quiescent current: 50 µA
- Operating temperature: –40°C to +125°C
- RFI filtered inputs
- Package: 8-pin VSSOP
The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.
A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).
The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.
The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA333-Q1 Automotive, Zerø-Drift, micro-Power Instrumentation Amplifier datasheet (Rev. B) | PDF | HTML | 2023. 6. 12 | |
| 기능 안전 정보 | INA333-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2022. 7. 14 | ||
| 애플리케이션 노트 | Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps | PDF | HTML | 2021. 7. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INAEVM — 범용 계측 증폭기 평가 모듈
The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown. See the chart in the user guide (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |