INA745A-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- Low loss integrated shunt
resistor
- Internal resistance: 800µΩ, TA = 25°C
- Continuous current: ±35A, TA = 25°C
- Peak measurement capability: ±39.32A
- Current monitoring accuracy: A/B Grade (maximum)
- Offset current: ±6.25mA / ±62.5mA
- Offset drift: ±30µA/°C (A and B Grades)
- System gain error: ±0.75% / ±1.25%
- Common-mode rejection: ±0.125 / ±1.25mA/V
- Power monitoring accuracy: A/B Grade, (maximum)
- ±0.9% / ±1.6% at 25°C, full scale
- Energy and charge accuracy: A/B Grade, (maximum)
- ±1.4% / ±2.1% at 25°C, full scale
- Temperature sensor: ±1.5°C (maximum at 25°C)
- Precision oscillator: ±0.5% (maximum at 25°C)
- Programmable conversion time and averaging
- 2.94MHz high-speed I2C interface with 16 pin-selectable addresses
- Operates from a 2.7V to 5.5V
supply:
- Operational current: 640µA (typical)
- Shutdown current: 5µA (maximum)
The INA745x-Q1 is a digital power monitor with an integrated current sensing element along with a 16-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure full-scale currents up to ±39.32A with common-mode voltage support from –0.1V to +40V.
The INA745x-Q1 reports current, bus voltage, die temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±2.5°C accurate over the junction temperature range.
The low offset and gain drift design of the INA745x-Q1 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing.
The device allows for selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA745x-Q1 AEC-Q100, 40V , 16 -Bit, Precision I2C Output Digital Power Monitor With EZShunt Technology datasheet (Rev. A) | PDF | HTML | 2025. 10. 3 | |
| 기능 안전 정보 | INA74X-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) | PDF | HTML | 2025. 5. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INA745-INA746EVM — 션트 레지스터가 내장된 EZShunt™ 디지털 전원 모니터용 INA745 및 INA746 평가 모듈
INA745 및 IN746 평가 모듈(EVM)은 지정된 입력 전류, 공통 모드 전압 및 온도 범위에 걸쳐 EZShunt™ Technology의 INA745A, INA745B 또는 INA746 고정밀 디지털 전원 모니터의 주요 기능과 성능을 평가하기 위한 소형 플랫폼입니다. 성능 평가를 위한 기기 요구 사항이 최소화되고, 장치에 내부 션트가 장착되어 프로토타입 제작 시간을 빠르게 단축합니다. 필요한 입력 전류와 공통 모드 전압을 구동하기 위한 지원 입력 소스가 필요합니다.
GUI를 통한 INA745-INA746EVM 전원 공급 (...)
ASC-STUDIO-INA745 — ASC Studio (SysConfig) for configuring all aspects of the INA745 current sensor
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (REL) | 14 | Ultra Librarian |