INA823
- Input overvoltage protection up to ±60 V
- Input voltage extends 150 mV below negative supply
- Low power supply current: 180 µA (typ)
- Precision performance:
- Low offset voltage: 20 µV (typ), 100 µV (max)
- Low input bias current: 8nA (max)
- Common-mode rejection:
- 84 dB, G = 1 (min)
- 104 dB, G = 10 (min)
- 120 dB, G ≥ 100 (min)
- Power supply rejection: 100 dB, G = 1 (min)
- Input voltage noise: 21 nV/√Hz
- Bandwidth: 1.9 MHz (G = 1), 60 kHz (G = 100)
- Stable with 1-nF capacitive loads
- Supply range:
- Single-supply: 2.7 V to 36 V
- Dual-supply: ±1.35 V to ±18 V
- Specified temperature range: –40°C to +125°C
- Packages: 8-pin SOIC and 8-pin VSSOP
The INA823 is an integrated instrumentation amplifier that offers low power consumption and operates over a wide, single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device provides low input offset voltage, low offset voltage drift, low input bias current, and low current noise while remaining cost-effective. Additional circuitry protects the inputs against overvoltage up to ±60 V.
The INA823 is optimized to provide a high common-mode rejection ratio. At G = 1, the common-mode rejection ratio exceeds 84 dB across the full input common-mode range. The INA823 has a wide common-mode voltage range as low as 150-mV below negative supply. The device is designed for low-voltage operation from a 2.7-V single supply, and dual supplies up to ±18 V. The low power and single supply operation enable hand-held, battery-operated systems.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA823 Precision, Low-Power, Wide-Supply (2.7-V to 36-V) Instrumentation Amplifier datasheet (Rev. B) | PDF | HTML | 2021. 11. 23 | |
| 애플리케이션 노트 | High Accuracy Wheatstone Bridge Amplifier Circuit to 4-20-mA Current Loop Transm | PDF | HTML | 2023. 9. 28 | ||
| Application brief | How to Select Amplifiers for Pressure Transmitter Applications (Rev. B) | PDF | HTML | 2023. 2. 14 | ||
| Product overview | Bridge Sensor Solution (Rev. A) | PDF | HTML | 2023. 1. 27 | ||
| Product overview | PLC Analog Input Front-End Architectures | PDF | HTML | 2022. 7. 31 | ||
| 애플리케이션 노트 | Cost-Optimized, High-Performance Front-End Design for Analog Input Modules | PDF | HTML | 2022. 6. 22 | ||
| 애플리케이션 노트 | Amplifier Input Common-Mode and Output-Swing Limitations | PDF | HTML | 2022. 1. 14 | ||
| 애플리케이션 노트 | Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps | PDF | HTML | 2021. 7. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INAEVM — 범용 계측 증폭기 평가 모듈
The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown. See the chart in the user guide (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |