INA951-SP
- QML Class-P Radiation Hardness Assured (QMLP-RHA) grade
- Radiation - Total
Ionizing Dose (TID):
- TID performance assurance up to 50krad(Si)
- Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 50krad(Si)
- Radiation - Single-Event Effects (SEE):
- Single Event Latch-Up (SEL) immune up to 75MeV-cm2 /mg at 125°C
- Single Event Transient (SET) characterized up to LET = 75MeV-cm2 /mg
- Supports defense,
aerospace, and medical applications
- Operating temperature from –55°C to +125°C
- Controlled baseline
- Au bondwire and NiPdAu lead finish
- Outgassing test performed per ASTM E595
- One fabrication, assembly, and test site
- Extended product life cycle
- Product traceability
- Wide common-mode voltage:
- Operational voltage: −4V to +80V
- Survival voltage: −20V to +85V
- Excellent CMRR:
- 160dB DC-CMRR
- 85dB AC-CMRR at 50kHz
- Accuracy:
- Gain:
- Gain error: ±0.15% (maximum)
- Gain drift: ±10ppm/ °C (maximum)
- Offset:
- Offset voltage: ±30µV (typical)
- Offset drift: ±0.05µV/ °C (typical)
- Gain:
- Available gain:
- INA951-SPA1, : 20V/V
- High bandwidth: 1.3MHz
- Slew rate: 2.5V/µs
- Quiescent current: 1.5mA
The INA951-SP is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4V to 80V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA951-SP is not only designed for DC current measurement, but also for high-speed applications (for example, fast over-current protection) with a high bandwidth of 1.3MHz and an 85dB AC CMRR (at 50kHz).
The INA951-SP operates from a single 2.7V to 5.5V supply, drawing 1.5mA of supply current. The INA951-SP is available with a gain option of 20V/V.
The INA951-SP is specified over an operating temperature range of −55°C to +125°C and is offered in a space-saving SOT-23 package.
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |