LM5032
- Two Independent PWM Current Mode Controllers
- Integrated High-Voltage Startup Regulator
- Compound 2.5-A Main Output Gate Drivers
- Single Resistor Oscillator Setting to 2 MHz
- Synchronizable Oscillator
- Programmable Maximum Duty Cycle
- Maximum Duty Cycle Fold-Back at High-Line Voltage
- Adjustable Timer for Hiccup Mode Current Limiting
- Integrated Slope Compensation
- Adjustable Line Undervoltage Lockout
- Independently Adjustable Soft-Start (Each Regulator)
- Direct Interface with Opto-Coupler Transistor
- Thermal Shutdown
- TSSOP 16-Pin Package
The LM5032 dual current mode PWM controller contains all the features needed to control either two independent forward dc/dc converters or a single high current converter comprised of two interleaved power stages. The two controller channels operate 180° out of phase thereby reducing input ripple current. The LM5032 includes a startup regulator that operates over a wide input range up to 100 V and compound (bipolar + CMOS) gate drivers that provide a robust 2.5-A peak sink current. The adjustable maximum PWM duty cycle reduce stress on the primary side MOSFET switches. Additional features include programmable line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable response time, PWM slope compensation, soft-start, and a 2-MHz capable oscillator with synchronization capability.
For all available packages, see the orderable addendum at the end of the datasheet.기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5032 High-Voltage Dual Interleaved Current Mode Controller datasheet (Rev. B) | PDF | HTML | 2014. 12. 15 | |
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 애플리케이션 노트 | AN-1820 LM5032 Interleaved Boost Converter (Rev. A) | 2013. 5. 6 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-00200 — 배터리 충전 애플리케이션을 위한 120V AC 200W, 90% 효율성, 인터리브 플라이백 레퍼런스 디자인
TIDA-00200은 부품 명세서를 최소화하면서 약 200W의 출력 전력이 필요한 배터리 충전기 애플리케이션을 위한 인터리브 플라이백 토폴로지를 제안합니다. 실제 전자 부품 외에도 냉각을 위한 노력이 전체 설계 비용의 주요 원인입니다. LM5032 고전압 듀얼 인터리브 전류 모드 컨트롤러를 활용함으로써 이 설계는 최대 부하에서 90%의 높은 효율을 달성하고 냉각 작업을 줄이기 위해 열을 분산시킵니다. 팬은 일반적으로 필요하지 않습니다. 더 작은 폼 팩터 히트 싱크가 필요하므로 추가적인 설계 유연성을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.