LM5069
- Wide operating range: 9 V to 80 V
- In-rush current limit for safe board insertion into live power sources
- Programmable maximum power dissipation in the external pass device
- Adjustable current limit
- Circuit breaker function for severe overcurrent events
- Internal high side charge pump and gate driver for external N-channel MOSFET
- Adjustable undervoltage lockout (UVLO) and hysteresis
- Adjustable overvoltage lockout (OVLO) and hysteresis
- Initial insertion timer allows ringing and transients to subside after system connection
- Programmable fault timer avoids nuisance trips
- Active high open drain POWER GOOD output
- Available in latched fault and automatic restart versions
- 10-Pin VSSOP package
The LM5069 positive hot swap controller provides intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other hot power sources. The LM5069 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass N-Channel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). The POWER GOOD output indicates when the output voltage is within 1.25 V of the input voltage. The input undervoltage and overvoltage lockout levels and hysteresis are programmable, as well as the initial insertion delay time and fault detection time. The LM5069-1 latches off after a fault detection, while the LM5069-2 automatically restarts at a fixed duty cycle. LM5069 is available in a 10-pin VSSOP package.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5069 Positive High-Voltage Hot Swap/Inrush Current Controller w/Power Limiting datasheet (Rev. G) | 2019. 11. 8 | ||
| 애플리케이션 노트 | Parallel Operation of TPS2663 eFuses | PDF | HTML | 2020. 11. 16 | ||
| 기술 문서 | eFuses in factory automation: all-in-one system power protection | PDF | HTML | 2020. 9. 15 | ||
| e북 | 11 Ways to Protect Your Power Path | 2019. 7. 3 | |||
| 애플리케이션 노트 | Accurate Thermal Calculations on the Back of a Napkin | 2019. 6. 3 | |||
| 애플리케이션 노트 | Basics of Power Switches (Rev. A) | PDF | HTML | 2019. 4. 26 | ||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 기술 문서 | Who tampered with my PLC? Are industrial control systems too flexible? | PDF | HTML | 2016. 8. 5 | ||
| 애플리케이션 노트 | Output Voltage Clamping Using the LM5069 Hot Swap Controller (Rev. B) | 2013. 5. 6 | |||
| 애플리케이션 노트 | Surge Stopping and Reverse Voltage Protection with the LM5069 | 2013. 4. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5069EVAL — 전원 제한을 지원하는 양극 고전압 핫 스왑 돌입 전류 컨트롤러 평가 모듈
The LM5069EVAL evaluation board provides the design engineer with a fully functional hot swap controller board designed for positive voltage systems. This board contains an LM5069-2, the auto restart version of this IC. This application note describes the various functions of the board, how to test (...)
LM5069EVM-627 — LM5069EVM-627 고전압 역방향 연결 역전류 핫 스왑 평가 모듈
LM5069EVM-627 provides the design engineer with a fully functional hotswap controller evaluation module designed with surge voltage clamping, reverse voltage protection and reverse current protection. The EVM features LM5069-2, with auto restart. The LM5069EVM-627 User Guide describes board (...)
LM5069-1 Unencrypted PSpice Transient Model Package (Rev. A)
LM5069-2 Unencrypted PSpice Transient Model Package (Rev. A)
LM5069QUICK-CALC — LM5069 Design Calculator
LM5069 계산기 도구를 사용하면 핫 스왑 설계를 만드는 프로세스를 간소화할 수 있습니다. 입력 전압 범위, 전류 및 출력 커패시턴스와 같은 시스템 요구 사항을 입력하면 계산기가 사용자에게 부품 선택을 안내해 줍니다. 이 툴은 기존 설계를 평가하거나 다양한 회로 상태에서 설계 마진을 분석하여 문제를 해결하는 데도 사용될 수 있습니다.
SNVR506 — LM5069 Design Calculator With FET Recommendation
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
많은 TI 레퍼런스 설계에는 LM5069이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.