LM5168E
- Functional Safety-Capable
- Designed for reliability in rugged applications
- 6V to 115V wide input voltage range
- –55°C to +150°C junction temperature range
- Fixed 3ms internal soft-start timer
- Peak and valley current-limit protection
- Input UVLO and thermal shutdown protection
- Designed for scalable industrial power supplies and battery packs
- Integration reduces design size and cost
- COT mode control architecture
- Integrated 1.9Ω NFET buck switch
- Integrated 0.71Ω NFET synchronous rectifier
- 1.2V internal voltage reference
- No loop compensation components
- Internal VCC bias regulator and boot diode
- Open-drain power-good indicator
- Package: SOIC PowerPAD™-8 integrated circuit package with 1.27mm pin spacing
The LM5168E is an extended temperature range, (–55°C to +150°C) synchronous buck converter designed to regulate over a wide input voltage range, minimizing the need for external surge suppression components. A minimum controllable on time of 50ns facilitates large step-down conversion ratios, enabling the direct step-down from a 48V nominal input to low-voltage rails for reduced system complexity and design cost. The LM5168E operates during input voltage dips as low as 6V, at nearly 100% duty cycle if needed, making the device an excellent choice for wide input supply range industrial and high cell count battery pack applications.
With integrated high-side and low-side power MOSFETs, the LM5168E delivers up to 0.3A of output current. A constant on-time (COT) control architecture provides nearly constant switching frequency with excellent load and line transient response. The LM5168E is available in the auto mode version, which enables ultra-low IQ and diode emulation mode operation for high light-load efficiency.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM5168E 115V, 0.3A, Synchronous Buck Converter datasheet | PDF | HTML | 2025/08/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5168FEVM — LM5168 평가 모듈 115V 플라이 벅 레귤레이터
LM5168PEVM — LM5168P 115V DC/DC 벅 레귤레이터 평가 모듈
LM5168P 평가 모듈(EVM)은 좁은 공간에서 높은 변환 효율을 달성하기 위해 동기 정류를 사용하는 115 V DC/DC 벅 레귤레이터입니다. 이 EVM은 20V~115V의 넓은 입력 전압 범위(최대 120V 절대 최대)에서 작동하며, 500kHz의 스위칭 주파수를 가지고 최대 0.3V에서 조정된 12V 출력을 제공합니다. 출력 전압은 1.5% 이상 설정값의 정확도를 제공하며, 외부 저항 분할기를 사용하여 조정할 수 있습니다. 이 모듈 설계에서는 넓은 입력 전압(넓은 VIN) 범위, 넓은 듀티 사이클 범위, 통합 고압측 전력 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치