LM72630-Q1
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Functional Safety-Capable
- Synchronous CC-CV buck converter with I2C
- Wide input voltage range: 4.5V to 70V
- Meets LV148 / ISO21780 requirements
- Programmable VOUT from 1V to 24V in 10mV steps or from 3.3V to 24V in 20mV steps
- Programmable ILIM(avg) from 0.5A to 4.5A
- Adjustable cable drop compensation (CDC)
- Analog current monitoring pin (IMON)
- Wide input voltage range: 4.5V to 70V
- Compatible with TPS2674X-Q1 USB Type-C power delivery (PD) controllers
- Designed for low EMI requirements
- Facilitates CISPR 25 Class 5 compliance
- ±5% dual-random spread spectrum with programmable modulation frequency
- Programmable fSW: 200kHz to 2.2MHz
- Programmable protection features
- UV/OV (PG) warning: ±5% or ±10%
- OVP warning, fault: 105% to 136% in 1% steps
- HICCUP-mode OCP, TSD
- 6mm × 6mm thermally optimized, RoHS compliant, VQFN-29 package with Pb-free plating
- Create a custom design using the LM72630-Q1 with the WEBENCH Power Designer
The LM72630-Q1 is a 70V, synchronous buck converter with constant-current constant-voltage (CC-CV) regulation and I2C interface. The device is compatible with USB Type-C PD controllers including the TPS2674X-Q1 family.
The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The highly accurate CC-CV operation enables seamless transition between constant-current and constant-voltage modes. The I2C interface allows programming of output voltage in 10mV or 20mV steps, average output current limit in 50mA steps, as well as output voltage slew rate, switching frequency, soft-start slew rate, mode of operation, current loop compensation, output active discharge strength, and cable drop compensation gain.
The LM72630-Q1 also contains an array of safety features including undervoltage and overvoltage protection with programmable thresholds, overcurrent protection with programmable hiccup mode, and thermal shutdown.
Additional features of the LM72630-Q1 include programmable diode emulation for lower current consumption at light-load conditions, open-drain nINT flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated dual input (VIN and VOUTF) VCC supply regulator, and oversized VDDA regulator for powering external loads, such as companion USB PD controllers.
The LM72630-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin VQFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
The LM72630-Q1 converter belongs to a family of synchronous buck converters with constant-current constant-voltage (CC-CV) regulation and I2C interface listed in Related Products.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| Functional safety information | LM726X0-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2026/05/26 | |
| EVM User's guide | LM72880-Q1 CC-CV Buck Converter With I2C Evaluation Module (Rev. A) | PDF | HTML | 2025/06/27 | |
| EVM User's guide | LM72650QEVM CC-CV Buck Converter Evaluation Module | PDF | HTML | 2025/06/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM72650QEVM — LM72650-Q1 평가 모듈
LM72650QEVM EVM(평가 모듈)은 LM72650을 사용하는 동기식 벅 DC/DC 레귤레이터입니다. 이 EVM은 I2C 인터페이스를 통한 CC-CV(정전류 정전압) 조정을 지원합니다. 이 EVM은 24V~70V의 넓은 입력 전압 범위에서 작동하며, CC 모드에서 5A의 최대 전류와 CV 모드에서 20V의 최대 전압을 제공합니다. 평균 인덕터 전류 제한과 출력 전압의 조정 목표는 I2C로 프로그래밍 가능합니다. 자유롭게 동작하는 스위칭 주파수도 I2C로 프로그래밍 가능하며, 더 높거나 더 낮은 주파수에서 외부 클록 신호와 (...)
LM72880QEVM-400 — LM72880-Q1 평가 모듈
LM72880-Q1 평가 모듈(EVM)은 I2C 인터페이스를 사용하여 CC-CV(정전류 정전압) 조정을 지원하는 동기 벅 DC/DC 레귤레이터입니다. 이 EVM은 24V~70V의 넓은 입력 전압 범위(J4 VIN 단자에서)에서 작동하며, CC 모드에서 5A의 최대 전류와 CV 모드에서 20V의 최대 전압을 제공합니다. 평균 인덕터 전류 제한과 출력 전압의 조정 목표는 I2C로 프로그래밍 가능합니다. 자유롭게 동작하는 스위칭 주파수도 I2C로 프로그래밍 가능하며, 더 높거나 더 낮은 주파수에서 외부 클록 신호와 동기화할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RRX) | 29 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치