LM72880-Q1
- AEC-Q100 qualified
for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Synchronous CC-CV buck converter with
I2C
- Wide input voltage range:
4.5V to 80V
- Meets LV148 / ISO21780 requirements
- 1% accurate, programmable VOUT from 1V (3.3V) to 24V (48V) in 10mV (20mV) steps
- 3% accurate, programmable ILIM(avg) from 0.5A (0.8A) to 7.5A (12A) in 50mA (80mA) steps
- Output slew rate: 0.5mV/µs to 40mV/µs
- Adjustable cable drop compensation
- Output active discharge
- Wide input voltage range:
4.5V to 80V
- Designed for pairing with TPS2674X-Q1 USB Type-C PD controllers
- Designed for low EMI requirements
- Facilitates CISPR 25 Class 5 compliance
- ±8% dual-random spread spectrum with programmable modulation frequency
- Programmable fSW: 200kHz to 2.2MHz
- Programmable PFM or FPWM operation
- Programmable protection features
- UV/OV (PG) warning: ±5% or ±10%
- OVP warning, fault: 5% to 36% in 1% steps
- Internal hiccup-mode overcurrent protection
- Enable, interrupt, and thermal shutdown
- 6mm × 6mm thermally optimized, RoHS compliant, QFN-29 package with Pb-free plating
The LM72880-Q1 is an 80V, ultra-low IQ, synchronous buck converter with constant-current constant-voltage (CC-CV) regulation and I2C interface. The device is designed to work with the TPS2674X-Q1 USB Type-C PD controllers.
The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The highly accurate CC-CV operation enables seamless transition between constant-current and constant-voltage modes. The I2C interface allows programming of output voltage in 10mV or 20mV steps, average output current limit in 50mA steps, as well as output voltage slew rate, switching frequency, soft-start slew rate, mode of operation, current loop compensation, output active discharge strength, and cable drop compensation gain.
The LM72880-Q1 also features an array of safety features including undervoltage and overvoltage protection with programmable thresholds, overcurrent protection with programmable hiccup mode, and thermal shutdown.
Additional features of the LM72880-Q1 include programmable diode emulation for lower current consumption at light-load conditions, open-drain nINT flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated dual input (VIN and VOUTF) VCC supply regulator, and oversized VDDA regulator for powering external loads, such as companion USB PD controllers.
The LM72880-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
추가 정보 요청
전체 데이터 시트를 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM72880-Q1 80V, 5A, 8A, Automotive, High-Efficiency CC-CV Buck Converter With I2C datasheet | PDF | HTML | 2025. 4. 16 | |
| EVM User's guide | LM72880-Q1 CC-CV Buck Converter With I2C Evaluation Module (Rev. A) | PDF | HTML | 2025. 6. 27 | ||
| 인증서 | LM72880QEVM-400 EU Declaration of Conformity (DoC) | 2025. 3. 25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM72880QEVM-400 — LM72880-Q1 평가 모듈
LM72880-Q1 평가 모듈(EVM)은 I2C 인터페이스를 사용하여 CC-CV(정전류 정전압) 조정을 지원하는 동기 벅 DC/DC 레귤레이터입니다. 이 EVM은 24V~70V의 넓은 입력 전압 범위(J4 VIN 단자에서)에서 작동하며, CC 모드에서 5A의 최대 전류와 CV 모드에서 20V의 최대 전압을 제공합니다. 평균 인덕터 전류 제한과 출력 전압의 조정 목표는 I2C로 프로그래밍 가능합니다. 자유롭게 동작하는 스위칭 주파수도 I2C로 프로그래밍 가능하며, 더 높거나 더 낮은 주파수에서 외부 클록 신호와 동기화할 수 있습니다.
USB2ANY — USB2ANY 인터페이스 어댑터
USB2ANY 인터페이스 어댑터는 컴퓨터에서 USB 연결을 통해 평가 모듈(EVM)을 제어할 수 있도록 고안된 툴입니다. USB2ANY는 주로 사용되는 여러 프로토콜 인터페이스를 지원하며 3.3V 및 5V 전원을 공급합니다.
LM72XXX-DESIGN-CALC — LM726xx, LM728xx quick-start design tool
PMP23501 — 차량용, 24V~60V 입력, 2포트 USB Power Delivery 최대 60W(포트당) 레퍼런스 설계
PMP23618 — 2포트(각각 최대 180W) 및 24V~60V 입력을 지원하는 차량용 USB 전원 공급 레퍼런스 설계
이 레퍼런스 설계는 자동차 ADAS(첨단 운전 보조 시스템), 인포테인먼트 및 계기판 애플리케이션에 전력을 제공합니다. 24V~60VDC 입력 범위 이상에서 주로 48VDC 전원으로 작동합니다. 다양한 고전력 장치를 충전할 수 있는 2개의 USB PD 출력이 제공됩니다. 이 설계는 48Vin에서 최대 180W, 36V, 5A 출력에 대해 98.1%의 변환 효율을 제공합니다. 테스트 보고서에는 전체 입력 범위에 걸친 작동 데이터가 포함되어 있으며, 최악의 시나리오를 보여주기 위한 5Vout~36Vout 사이의 출력 전환을 포함하고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RRX) | 29 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.