LM7311
- Wide operating input voltage
range: 3.5V to 23V
- 28V absolute maximum
- Output negative voltage support up to -1V
- Integrated back-to-back FETs with low ON-resistance: RON = 33mΩ (typical)
- 5A continuous current
- 15A peak current for 10ms with 2% duty cycle
- Active high enable input with adjustable undervoltage lockout (UVLO)
- Ideal diode operation with true reverse-current blocking (RCB)
- Fixed overvoltage (OVLO) protection with debounce time
- Analog load current monitor
output (IMON)
- Current range: 1A to 5.5A
- Accuracy: ±3% (IOUT≥3A)
- Short circuit protection at startup and steady state
- Adjustable output slew rate control (dVdT)
- Overtemperature protection
- IEC61000-4-2: ±8kV direct contact and ±15kV air discharge on VIN and VOUT
- IEC61000-4-5: 35V on VIN, no cap
- Digital output: fault indication (FLT)
- Small footprint: DFN 3mm × 3mm
The LM7311x family is a highly integrated, circuit-protection and power-management device in a small package. The devices provide multiple protection modes that use few external components and are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current. With integrated back-to-back FETs, reverse-current flow from output to input is blocked at all times, making the devices an excellent choice for ORing applications, as well as systems that need load side energy holdup storage if input power supply fails. The devices use a linear ORing based scheme to maintain almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.
Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds the fixed overvoltage threshold.
The device provides an accurate sense of the output load current on the analog current monitor pin.
The device provides robust protection from overvoltages and short-circuit protection in start-up (ISFT) and Steady state (IFFT). The negative 1V DC support on VOUT provides additional robustness during inductive negative transients at VOUT.
The devices are available in a 3mm × 3mm, for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range from –40°C to +125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM7311 3.5V–23V, 33mΩ, 5A eFuse With True Reverse Current Blocking datasheet (Rev. A) | PDF | HTML | 2026. 11. 10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM7320-30EVM — LM7311, LM7320 및 LM7330 평가 모듈
The LM7320-30EVM evaluates the performance of the LM7311, LM7320, and LM7330 eFuse devices. The LM7320-30EVM comes with LM7311 and LM7330 eFuse for evaluation of 12V (typical) and 5A (steady state) designs.
Evaluate the LM7320 by replacing LM7311 on the U1 slot.
LM7311-CALC — LM7311 Design Calculator
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DRR) | 12 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.