이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LMR14050-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification level H1C
- Device CDM ESD classification level C4A
- 4V to 40V input range
- 5A continuous output current
- Ultra-low 40µA operating quiescent current
- 90mΩ high-side MOSFET
- 75ns minimum switch-on time
- Current mode control
- Adjustable switching frequency from 200kHz to 2.5MHz
- Frequency synchronization to external clock
- Spread spectrum option for reduced EMI
- Internal compensation for ease of use
- High duty cycle operation supported
- Precision enable input
- 1µA shutdown current
- External soft start
- Thermal, overvoltage, and short protection
- 8-Pin HSOIC with PowerPAD™ package
The LMR14050-Q1 is a 40V, 5A step down regulator with an integrated high-side MOSFET. With a wide input range from 4V to 40V, the device is designed for various applications from industrial to automotive for power conditioning from unregulated sources. An extended family is available in 2A and 3.5A options in pin-to-pin compatible packages, including LMR14020-Q1 and LMR14030-Q1. The regulator quiescent current is 40µA in sleep mode, which is designed for battery powered systems. An ultra-low 1µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This feature also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.
The LMR14050-Q1 is available in an 8-pin HSOIC or 10-pin WSON package with exposed pad for low thermal resistance.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LMR14050-Q1 SIMPLE SWITCHER® Power Converter, 40V, 5A, Automotive, Step-Down Converter With 40µA IQ datasheet (Rev. B) | PDF | HTML | 2024. 12. 20 | |
| 애플리케이션 노트 | Reduce Conducted EMI in Automotive Buck Converter Applications | 2019. 7. 31 | |||
| 애플리케이션 노트 | How to Evaluate Junction Temperature Properly with Thermal Metrics (Rev. B) | 2019. 3. 29 | |||
| 애플리케이션 노트 | How SYNC Logic Affects EMI Performance for Dual-Channel Buck Converters | 2018. 4. 27 | |||
| 기술 문서 | There are more ways than you think to reduce conducted EMI | PDF | HTML | 2018. 4. 17 | ||
| 애플리케이션 노트 | Low Conducted EMI Power Solution for Automotive Digital Cockpit With LMR14050 an | 2018. 2. 7 | |||
| 애플리케이션 노트 | Design Feedforward Capacitor for LMR14020 | 2017. 12. 20 | |||
| 애플리케이션 노트 | How to Evaluate the Maximum Inductor in Internal Compensation PCM Buck Converter | 2017. 9. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMR14050QDPREVM — LMR14050QDPR 넓은 Vin 스텝다운 컨버터 평가 모듈
LMR14050SEVM — LMR14050S 스텝다운 컨버터 평가 모듈
The LMR14050SEVM is a fully assembled and tested circuit for evaluating the LMR14050S Step-Down Converter. The LMR14050SEVM operates from 7V to 36V input (12V nominal) and provides a 5.0V or 3.3V output at 5A. The board also has jumper connectors to enable or disable the converter operation, change (...)
TIDA-00887 — 배터리 단락 보호를 지원하는 오토모티브 2.4A 듀얼 포트 USB 허브 레퍼런스 디자인
TIDA-00887은 TPD3S716-Q1이 제공하는 두 다운스트림 포트에서 STB(배터리 단락)와 단락 보호 기능을 지원하는 2포트 USB 2.0 허브로 구성되어 있습니다. 두 다운스트림 포트는 업스트림 장치가 연결되지 않은 경우 TUSB4020BI-Q1 USB 2.0 허브에서 제공하는 사용자 지정 분할기 모드 또는 DCP(전용 충전 포트)로 구성됩니다. 업스트림이 연결되면 TUSB4020 허브는 CDP를 통한 충전을 지원합니다. 연결된 장치에 가장 빠른 충전 속도를 제공하기 위해 연결된 휴대용 장치에 따라 포트가 분할기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
| WSON (DPR) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.