홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨버터
신규

LMR61440-Q1

활성

Automotive, 36VIN, 4A synchronous step-down converter for high efficiency and low output noise

지금 주문하기
데이터 시트

LMR61440-Q1

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000004 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000004 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
WQFN-HR (RAK) 9 5 mm² 2.5 x 2
  • Mitigated interference and noise technology – architecture 1 (MINT 1):
    • Low output noise optimized dual random spread spectrum (DRSS)
    • Facilitates CISPR 25 class 5 compliance
    • Low inductance HotRod™ QFN package
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • Wide operating input voltage: 3V to 36V (42V absolute maximum)
  • Programmable output voltage options available in fixed 3.3V/ADJ and 5V/ADJ
    • Adjustable output voltage range from 1V to 20V
  • Ultra-low quiescent current
    • Shutdown current: 0.75µA
    • No load standby current: 3.8µA
  • Optimized control loop for low output capacitance
  • Switching frequency from 200kHz – 2.2MHz
  • Low minimum tON (30ns typical)
  • FPWM, PFM, or external frequency synchronization available
  • Designed for scalable power supplies
  • Power-Good output for power sequencing
  • Mitigated interference and noise technology – architecture 1 (MINT 1):
    • Low output noise optimized dual random spread spectrum (DRSS)
    • Facilitates CISPR 25 class 5 compliance
    • Low inductance HotRod™ QFN package
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • Wide operating input voltage: 3V to 36V (42V absolute maximum)
  • Programmable output voltage options available in fixed 3.3V/ADJ and 5V/ADJ
    • Adjustable output voltage range from 1V to 20V
  • Ultra-low quiescent current
    • Shutdown current: 0.75µA
    • No load standby current: 3.8µA
  • Optimized control loop for low output capacitance
  • Switching frequency from 200kHz – 2.2MHz
  • Low minimum tON (30ns typical)
  • FPWM, PFM, or external frequency synchronization available
  • Designed for scalable power supplies
  • Power-Good output for power sequencing

The LMR61440-Q1 is a 3V to 36V (42V transient), 4A, synchronous buck converter in an ultra compact 2.5mm × 2mm QFN-9 package with wettable flanks. The LMR61440-Q1 with mitigated interference and noise technology using architecture 1 features (MINT 1) enables the device to achieve low EMI performance and low output noise to facilitate noise-sensitive designs.

All device variants are capable of output voltages ranging from 1V to 20V in adjustable output configuration. Each variant is also capable of delivering a fixed output voltage by connecting the output voltage node directly to the feedback pin. The Device Comparison Table provides details on the fixed output voltage options. The current-mode control architecture with 30ns minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

Open drain power-good output facilitates power sequencing requirements. The MODE/SYNC pin of the LMR61440-Q1 allows the user to select between forced pulse width modulation (FPWM), auto mode, or external synchronization mode of operation.

The LMR61440-Q1 is designed to offer reduced output capacitance leading to compact PCB layout and system cost savings. The LMR61440-Q1 is a part of a family of pin-compatible devices ranging in current levels from 0.6A to 6A.

The LMR61440-Q1 is a 3V to 36V (42V transient), 4A, synchronous buck converter in an ultra compact 2.5mm × 2mm QFN-9 package with wettable flanks. The LMR61440-Q1 with mitigated interference and noise technology using architecture 1 features (MINT 1) enables the device to achieve low EMI performance and low output noise to facilitate noise-sensitive designs.

All device variants are capable of output voltages ranging from 1V to 20V in adjustable output configuration. Each variant is also capable of delivering a fixed output voltage by connecting the output voltage node directly to the feedback pin. The Device Comparison Table provides details on the fixed output voltage options. The current-mode control architecture with 30ns minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

Open drain power-good output facilitates power sequencing requirements. The MODE/SYNC pin of the LMR61440-Q1 allows the user to select between forced pulse width modulation (FPWM), auto mode, or external synchronization mode of operation.

The LMR61440-Q1 is designed to offer reduced output capacitance leading to compact PCB layout and system cost savings. The LMR61440-Q1 is a part of a family of pin-compatible devices ranging in current levels from 0.6A to 6A.
filter 기타 DC/DC 컨버터 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LMR61440-Q1 36V, 4A , MINT 1, Automotive Synchronous Buck Converter With Optimized Spread Spectrum for Flat Output Noise datasheet PDF | HTML 2026/06/22
Functional safety information LMR614x0-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026/06/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMR60440QEVM — LMR60440-Q1 평가 모듈

LMR60440-Q1은 좁은 공간에서 높은 변환 효율을 달성하기 위해 동기 정류 기능을 갖춘 36V, 4A, DC/DC 벅 컨버터입니다. EVM은 8V~36V의 넓은 입력 전압 범위에서 작동하여 2.2MHz 스위칭 주파수에서 최대 4A 부하까지 조정된 3.3V 출력을 제공합니다. LMR60440QEVM은 1% 이상의 출력 전압 조정 정확도를 지원할 수 있으며 외부 저항 분할기를 사용하여 출력 전압 설정값을 조정할 수 있습니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN-HR (RAK) 9 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상