LP2985
- VIN range (new chip): 2.5V to 16V
- VOUT range (new chip):
- 1.2V to 5.0V (fixed, 100mV steps)
- VOUT accuracy:
- ±1% for A-grade (legacy chip)
- ±1.5% for standard-grade (legacy chip)
- ±0.5% (new chip)
- ±1% output accuracy over load and temperature (new chip)
- Output current: Up to 150mA
- Low IQ (new chip): 71µA at ILOAD = 0mA
- Low IQ (new chip): 750µA at ILOAD = 150mA
- Shutdown current:
- 0.01µA (typ, legacy chip)
- 1.12µA (typ, new chip)
- Low noise: 30µVRMS with 10nF bypass capacitor
- Output current limiting and thermal protection
- Stable with 2.2µF ceramic capacitors (new chip)
- High PSRR: 70dB at 1kHz, 40dB at 1MHz (new chip)
- Operating junction temperature: –40°C to +125°C
- Package: 5-pin SOT-23 (DBV)
The LP2985 is a fixed-output, wide-input, low-noise, low-dropout voltage regulator supporting an input voltage range from 2.5V to 16V (for new chip) and up to 150mA of load current. The LP2985 supports an output range of 1.2V to 5.0V (for new chip).
Additionally, the LP2985 (new chip) has a ±1% output accuracy across load, and temperature that can meet the needs of low-voltage microcontrollers (MCUs) and processors.
Low output noise of 30µVRMS (with 10nF bypass capacitors) and wide bandwidth PSRR performance of greater than 70dB at 1kHz and 40dB at 1MHz help attenuate the switching frequency of an upstream DC/DC converter and minimize post regulator filtering.
The new chip provides internal soft-start mechanism to reduce inrush current during start up, thus minimizing input capacitance. Standard protection features, such as overcurrent and overtemperature protection, are also included.
The LP2985 is available in a 5-pin 2.9mm × 2.8mm SOT-23 (DBV) package.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8835EVM — DRV8835 평가 모듈
The DRV8835 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8835 motor driver from Texas Instruments. User can control the DRV8835 with an external microcontroller via signal header connectors or use on-board switches for stand-alone operation.
DRV8837CEVM — 1A 저전압 H 브리지 평가 모듈
이 EVM에는 간단한 5V 모터 공급을 위한 마이크로 USB 커넥터, LP2985 LDO의 조정된 3.3V 공급, 모든 제어 및 피드백 신호를 위한 테스트 (...)
LMG1025-Q1EVM — LMG1025-Q1 GaN 저압측 드라이버 + GaN FET LiDAR 평가 모듈
TIDA-01598 — 태양광 인버터를 위한 저압측, 고대역폭 전류 증폭기 및 고장 감지 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.