OPA2675
- Wideband operation: 340 MHz (G = 4 V/V)
- Unity-gain stable: 730 MHz (G = 1 V/V)
- High output current: ±1000 mA
- Active offline mode for TDMA
- Adjustable power modes:
- Full-bias mode: 16.5 mA/channel
- 75% bias mode: 12.5 mA/channel
- 50% bias mode: 8.5 mA/channel
- Off-Line mode: 2.4 mA/channel
- Bipolar-supply range: ±2.5 V to ±6.5 V
- Single-supply range: 4.5 V to 13 V
- High slew rate: 3500 V/µs
- Overtemperature protection circuit
- Output current limit (±1.3 A)
The OPA2675 provides the high output current and low distortion required for power-line modem driver and test and measurement applications. The OPA2675 operates on power-supplies ranging from 4.5 V to 13 V and consumes a low 16.5 mA/channel quiescent current to deliver a very high 1000 mA output current. The OPA2675 supports the most demanding power-line modem requirements with an 850 mA specified minimum output current drive (at 25°C).
Power-control features are included to minimize system power consumption. Two logic-control lines allow for four quiescent power settings, full power, 75% bias power, 50% bias power, and offline mode with active offline control, to provide high impedance to large signals present at the output pin. The two channels of the OPA2675 can be used independently as individual op amps, or can be configured as a differential-input to differential-output, high-current line driver.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | OPA2675 Dual, High Output Current Operational Amplifier With Active Offline Control datasheet (Rev. C) | PDF | HTML | 2023. 5. 18 | ||
| Application brief | Power Line Communication in Solar Applications | PDF | HTML | 2024. 12. 12 | |||
| Application brief | LiFi: TI High-Speed Products for Optical Wireless Communication | PDF | HTML | 2023. 8. 7 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-RGV-EVM — VQFN 패키지와 호환되는 고속 고출력 전류 증폭기용 채우기 전 상태의 평가 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGV) | 16 | Ultra Librarian |