OPA336-EP

마지막 구매

EP(Enhanced Product) 단일 공급, 마이크로파워 CMOS 연산 증폭기 마이크로증폭기(Tm)

제품 상세 정보

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.3 Vos (offset voltage at 25°C) (max) (mV) 0.5 Offset drift (typ) (µV/°C) 1.5 Input bias current (max) (pA) 10 GBW (typ) (MHz) 0.1 Slew rate (typ) (V/µs) 0.03 Rail-to-rail In to V-, Out Iq per channel (typ) (mA) 0.023 Vn at 1 kHz (typ) (nV√Hz) 40 CMRR (typ) (dB) 86 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.005 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.2 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 0.02 Output swing headroom (to positive supply) (typ) (V) -0.02
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.3 Vos (offset voltage at 25°C) (max) (mV) 0.5 Offset drift (typ) (µV/°C) 1.5 Input bias current (max) (pA) 10 GBW (typ) (MHz) 0.1 Slew rate (typ) (V/µs) 0.03 Rail-to-rail In to V-, Out Iq per channel (typ) (mA) 0.023 Vn at 1 kHz (typ) (nV√Hz) 40 CMRR (typ) (dB) 86 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.005 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.2 Input common mode headroom (to positive supply) (typ) (V) -1 Output swing headroom (to negative supply) (typ) (V) 0.02 Output swing headroom (to positive supply) (typ) (V) -0.02
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Extended Temperature Performance of -55°C to 125°C
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree(1)
  • Single-Supply Operation
  • Rail-to-Rail Output (Within 3 mV)
  • Micro Power: IQ = 23 µA/Amplifier
  • Micro-Size Packages
  • Low Offset Voltage: 500 µV Typical
  • Specified From VS = 2.3 V to 5.5 V
  • APPLICATIONS
    • Battery-Powered Instruments
    • Portable Devices
    • High-Impedance Applications
    • Photodiode Preamplifiers
    • Precision Integrators
    • Medical Instruments
    • Test Equipment

(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

MicroAmplifier is a trademark of Texas Instruments.

  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Extended Temperature Performance of -55°C to 125°C
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree(1)
  • Single-Supply Operation
  • Rail-to-Rail Output (Within 3 mV)
  • Micro Power: IQ = 23 µA/Amplifier
  • Micro-Size Packages
  • Low Offset Voltage: 500 µV Typical
  • Specified From VS = 2.3 V to 5.5 V
  • APPLICATIONS
    • Battery-Powered Instruments
    • Portable Devices
    • High-Impedance Applications
    • Photodiode Preamplifiers
    • Precision Integrators
    • Medical Instruments
    • Test Equipment

(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

MicroAmplifier is a trademark of Texas Instruments.

The OPA336 micro-power CMOS operational amplifier (MicroAmplifier™ series) is designed for battery-powered applications. The device operates on a single supply, with operation as low as 2.1 V. The output is rail to rail and swings to within 3 mV of the supplies with a 100-k load. The common-mode range extends to the negative supply — ideal for single-supply applications.

In addition to small size and low quiescent current (23 µA/amplifier), the OPA336 features low offset voltage (500 µV typical), low input bias current (1 pA), and high open-loop gain (115 dB).

The device is packaged in the tiny DBV (SOT23-5) surface-mount package. It operates from -55°C to 125°C. A macromodel is available for download (at www.ti.com) for design analysis.

The OPA336 micro-power CMOS operational amplifier (MicroAmplifier™ series) is designed for battery-powered applications. The device operates on a single supply, with operation as low as 2.1 V. The output is rail to rail and swings to within 3 mV of the supplies with a 100-k load. The common-mode range extends to the negative supply — ideal for single-supply applications.

In addition to small size and low quiescent current (23 µA/amplifier), the OPA336 features low offset voltage (500 µV typical), low input bias current (1 pA), and high open-loop gain (115 dB).

The device is packaged in the tiny DBV (SOT23-5) surface-mount package. It operates from -55°C to 125°C. A macromodel is available for download (at www.ti.com) for design analysis.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet OPA336-EP datasheet 2006/02/08

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치