OPA564
- HIGH OUTPUT CURRENT: 1.5A
- WIDE POWER-SUPPLY RANGE:
- Single Supply: +7V to +24V
- Dual Supply: ±3.5V to ±12V
- LARGE OUTPUT SWING: 20VPP at 1.5A
- FULLY PROTECTED:
- THERMAL SHUTDOWN
- ADJUSTABLE CURRENT LIMIT
- DIAGNOSTIC FLAGS:
- OVER-CURRENT
- THERMAL SHUTDOWN
- OUTPUT ENABLE/SHUTDOWN CONTROL
- HIGH SPEED:
- GAIN-BANDWIDTH PRODUCT: 17MHz
- FULL-POWER BANDWIDTH AT 10VPP: 1.3MHz
- SLEW RATE: 40V/µs
- DIODE FOR JUNCTION TEMPERATURE MONITORING
- HSOP-20 PowerPAD PACKAGE
(Bottom- and Top-Side Thermal Pad Versions) - APPLICATIONS
- POWERLINE COMMUNICATIONS
- VALVE, ACTUATOR DRIVER
- VCOM DRIVER
- MOTOR DRIVER
- AUDIO POWER AMPLIFIER
- POWER-SUPPLY OUTPUT AMPLIFIER
- TEST EQUIPMENT AMPLIFIER
- TRANSDUCER EXCITATION
- LASER DIODE DRIVER
- GENERAL-PURPOSE LINEAR POWER BOOSTER
PowerPAD is a trademark of Texas Instruments, Inc.
All other trademarks are the property of their respective owners.
The OPA564 is a low-cost, high-current operational amplifier that is ideal for driving up to 1.5A into reactive loads. The high slew rate provides 1.3MHz full-power bandwidth and excellent linearity. These monolithic integrated circuits provide high reliability in demanding powerline communications and motor control applications.
The OPA564 operates from a single supply of 7V to 24V, or dual power supplies of ±3.5V to ±12V. In single-supply operation, the input common-mode range extends to the negative supply. At maximum output current, a wide output swing provides a 20VPP (IOUT = 1.5A) capability with a nominal 24V supply.
The OPA564 is internally protected against over-temperature conditions and current overloads. It is designed to provide an accurate, user-selected current limit. Two flag outputs are provided; one indicates current limit and the second shows a thermal over-temperature condition. It also has an Enable/Shutdown pin that can be forced low to shut down the output, effectively disconnecting the load.
The OPA564 is housed in a thermally-enhanced, surface-mount PowerPAD™ package (HSOP-20) with the choice of the thermal pad on either the top side or the bottom side of the package. Operation for both versions is specified over the industrial temperature range, –40°C to +85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 1.5A, 24V, 17MHz Power Operational Amplifier datasheet (Rev. E) | 2011. 1. 28 | ||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 사용 설명서 | TINA Simulation Schematic of a Two-Node, Power-Line Communication System | 2013. 9. 6 | |||
| 애플리케이션 노트 | Biasing Considerations for OPA564 During Enabled and Disabled States | 2011. 3. 6 | |||
| 애플리케이션 노트 | Power Amplifier Stress and Power Handling Limitations | 2000. 9. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
OPA564 TINA-TI Transient and AC Reference Design (Rev. A)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DWD) | 20 | Ultra Librarian |
| HSOIC (DWP) | 20 | Ultra Librarian |