OPA847

활성

광대역, 초저잡음, 전압 피드백 연산 증폭기(셧다운 지원)

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
OPA892 활성 초저 총 고조파 왜곡(THD)을 지원하는 2GHz 10V/V 안정적인 0.95nV√Hz 연산 증폭기 Wider Voltage (36 V), lower Iq (7.5 mA), lower offset drift (1 µV/°C), and lower THD + N ( -114 dB)

제품 상세 정보

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 3900 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 12 Slew rate (typ) (V/µs) 950 Vn at flatband (typ) (nV√Hz) 0.85 Vn at 1 kHz (typ) (nV√Hz) 1.4 Iq per channel (typ) (mA) 18.1 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail No Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 39000000 Offset drift (typ) (µV/°C) 0.25 Iout (typ) (mA) 75 2nd harmonic (dBc) 74 3rd harmonic (dBc) 103 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 3900 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 12 Slew rate (typ) (V/µs) 950 Vn at flatband (typ) (nV√Hz) 0.85 Vn at 1 kHz (typ) (nV√Hz) 1.4 Iq per channel (typ) (mA) 18.1 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail No Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 39000000 Offset drift (typ) (µV/°C) 0.25 Iout (typ) (mA) 75 2nd harmonic (dBc) 74 3rd harmonic (dBc) 103 Frequency of harmonic distortion measurement (MHz) 5
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • HIGH GAIN BANDWIDTH: 3.9GHz
  • LOW INPUT VOLTAGE NOISE: 0.85nV/√Hz
  • VERY LOW DISTORTION: –105dBc (5MHz)
  • HIGH SLEW RATE: 950V/µs
  • HIGH DC ACCURACY: VIO < ±100µV
  • LOW SUPPLY CURRENT: 18.1mA
  • LOW SHUTDOWN POWER: 2mW
  • STABLE FOR GAINS 12
  • APPLICATIONS
    • HIGH DYNAMIC RANGE ADC PREAMPS
    • LOW NOISE, WIDEBAND, TRANSIMPEDANCE AMPLIFIERS
    • WIDEBAND, HIGH GAIN AMPLIFIERS
    • LOW NOISE DIFFERENTIAL RECEIVERS
    • ULTRASOUND CHANNEL AMPLIFIERS
    • IMPROVED UPGRADE FOR THE OPA687, CLC425, AND LMH6642

All trademarks are the property of their respective owners.

  • HIGH GAIN BANDWIDTH: 3.9GHz
  • LOW INPUT VOLTAGE NOISE: 0.85nV/√Hz
  • VERY LOW DISTORTION: –105dBc (5MHz)
  • HIGH SLEW RATE: 950V/µs
  • HIGH DC ACCURACY: VIO < ±100µV
  • LOW SUPPLY CURRENT: 18.1mA
  • LOW SHUTDOWN POWER: 2mW
  • STABLE FOR GAINS 12
  • APPLICATIONS
    • HIGH DYNAMIC RANGE ADC PREAMPS
    • LOW NOISE, WIDEBAND, TRANSIMPEDANCE AMPLIFIERS
    • WIDEBAND, HIGH GAIN AMPLIFIERS
    • LOW NOISE DIFFERENTIAL RECEIVERS
    • ULTRASOUND CHANNEL AMPLIFIERS
    • IMPROVED UPGRADE FOR THE OPA687, CLC425, AND LMH6642

All trademarks are the property of their respective owners.

The OPA847 combines very high gain bandwidth and large signal performance with an ultra-low input noise voltage (0.85nV/√Hz) while using only 18mA supply current. Where power saving is critical, the OPA847 also includes an optional power shutdown pin that, when pulled low, disables the amplifier and decreases the supply current to < 1% of the powered-up value. This optional feature may be left disconnected to ensure normal amplifier operation when no power-down is required.

The combination of very low input voltage and current noise, along with a 3.9GHz gain bandwidth product, make the OPA847 an ideal amplifier for wideband transimpedance applications. As a voltage gain stage, the OPA847 is optimized for a flat frequency response at a gain of +20V/V and is stable down to gains as low as +12V/V. New external compensation techniques allow the OPA847 to be used at any inverting gain with excellent frequency response control. Using this technique in a differential Analog-to-Digital Converter (ADC) interface application, shown below, can deliver one of the highest dynamic range interfaces available.

The OPA847 combines very high gain bandwidth and large signal performance with an ultra-low input noise voltage (0.85nV/√Hz) while using only 18mA supply current. Where power saving is critical, the OPA847 also includes an optional power shutdown pin that, when pulled low, disables the amplifier and decreases the supply current to < 1% of the powered-up value. This optional feature may be left disconnected to ensure normal amplifier operation when no power-down is required.

The combination of very low input voltage and current noise, along with a 3.9GHz gain bandwidth product, make the OPA847 an ideal amplifier for wideband transimpedance applications. As a voltage gain stage, the OPA847 is optimized for a flat frequency response at a gain of +20V/V and is stable down to gains as low as +12V/V. New external compensation techniques allow the OPA847 to be used at any inverting gain with excellent frequency response control. Using this technique in a differential Analog-to-Digital Converter (ADC) interface application, shown below, can deliver one of the highest dynamic range interfaces available.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
14개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet Wideband, Ultra Low-Noise, Voltage-Feedback Operational Amplifier with Shutdown datasheet (Rev. E) 2008/12/30
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017/03/28
Application note RLC Filter Design for ADC Interface Applications (Rev. A) 2015/05/13
User guide DEM-OPA-SO-1A User's Guide (Rev. B) 2012/04/12
User guide DEM-OPA-SO-1B User's Guide (Rev. D) 2012/04/12
User guide DEM-OPA-SOT-1A User's Guide (Rev. B) 2012/04/12
Application note Transimpedance Considerations for High-Speed Operational Amplifiers 2009/11/22
User guide Voltage-Controlled Amplifier Evaluation Kit 2008/08/25
User guide DEM-OPA-SOT-1B User's Guide (Rev. B) 2006/04/12
Analog Design Journal Low-power, high-intercept interface to the ADS5424, 105-MSPS converter 2005/10/10
Analog Design Journal Using a decompensated op amp for improved performance 2005/03/11
Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005/01/17
Application note ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers 2004/04/22
Application note Measuring Board Parasitics in High-Speed Analog Design 2003/07/07

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DEM-OPA-SO-1B — SO-8(비인버팅) 패키지를 위한 단일 연산 증폭기 평가 모듈

The DEM-OPA-SO-1B demonstration fixture in the non-inverting configuration helps designers evaluate the operation and performance of TI's single high speed, wideband operational amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.

For more (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
평가 보드

DEM-OPA-SOT-1B — SOT23-5/6(비인버팅) 패키지를 위한 단일 연산 증폭기 평가 모듈

The DEM-OPA-SOT-1B demonstration fixture in the non-inverting configuration helps designers evaluate the operation and performance of TI's single high speed, wideband operational amplifiers. This unpopulated PC board is compatible with products offered in the SOT23 (DBV) package.

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

OPA847 ADS Model

SBOJ018.ZIP (54 KB) - Spice Model
시뮬레이션 모델

OPA847 PSpice Model

SBOC037.ZIP (1 KB) - PSpice Model
시뮬레이션 모델

OPA847 PSpice Model (Rev. A)

SBOC037A.ZIP (2 KB) - PSpice Model
시뮬레이션 모델

OPA847 TINA-TI Reference Design (Rev. C)

SBOC098C.TSC (54 KB) - TINA-TI Reference Design
시뮬레이션 모델

OPA847 TINA-TI Spice Model (Rev. A)

SBOM180A.ZIP (6 KB) - TINA-TI Spice Model
계산 툴

ANALOG-ENGINEER-CALC PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
레퍼런스 디자인

TIPD147 — 오실로스코프 또는 스펙트럼 분석기를 위한 잡음 측정 사후 증폭기

In some cases a scope or spectrum analyzer does not have the range required to measure very small noise levels.  This noise measurement post-amp boosts the output noise of the device under test (DUT) to allow for measurement with standard test equipment. The key requirements of this circuit is (...)
사용 설명서: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian
SOT-23 (DBV) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상