제품 상세 정보

PGA/VGA PGA Number of channels 1 Vs (min) (V) 9 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.3 Interface type GPIO BW at Acl (MHz) 8 Acl, min spec gain (V/V) 0.5 Gain (max) (dB) 100 Architecture Bipolar Features Fully Differential, Overvoltage protection, Super-beta Vos (offset voltage at 25°C) (typ) (mV) 0.05 Input voltage noise (typ) (µV√Hz) 0.034 Slew rate (typ) (V/µs) 35 Iq per channel (typ) (mA) 5.2 Gain error (typ) (%) 0.01 Gain drift (max) (ppm/°C) 2 Rating Catalog Operating temperature range (°C) -40 to 125
PGA/VGA PGA Number of channels 1 Vs (min) (V) 9 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.3 Interface type GPIO BW at Acl (MHz) 8 Acl, min spec gain (V/V) 0.5 Gain (max) (dB) 100 Architecture Bipolar Features Fully Differential, Overvoltage protection, Super-beta Vos (offset voltage at 25°C) (typ) (mV) 0.05 Input voltage noise (typ) (µV√Hz) 0.034 Slew rate (typ) (V/µs) 35 Iq per channel (typ) (mA) 5.2 Gain error (typ) (%) 0.01 Gain drift (max) (ppm/°C) 2 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RGT) 16 9 mm² 3 x 3
  • Eight pin-programmable decade (scope) gains
    • G (V/V) = ½, 1, 2, 5, 10, 20, 50, and 100
  • Fully differential outputs
  • Output common-mode control
  • Low gain error drift: ±2ppm/°C (maximum)
  • Faster signal processing:
    • Wide bandwidth: 6.2MHz (G < 10), 2.4MHz (G = 50, 100)
    • High slew rate: 45V/µs at all gains
    • Settling time: 750ns to 0.01% (G < 20)
    • Input stage noise: 8.8nV/√Hz at G > 10V/V
    • Filter option to achieve better SNR
  • Input overvoltage protection to ±40V beyond supplies
  • Input-stage supply range:
    • Single supply: 9V to 36V
    • Dual supply: ±4.5V to ±18V
  • Independent output power-supply pins
  • Output-stage supply range:
    • Single supply: 4.5V to 36V
    • Dual supply: ±2.25V to ±18V
  • Specified temperature range: ­–40°C to +125°C
  • Small package: 3mm × 3mm VQFN
  • Eight pin-programmable decade (scope) gains
    • G (V/V) = ½, 1, 2, 5, 10, 20, 50, and 100
  • Fully differential outputs
  • Output common-mode control
  • Low gain error drift: ±2ppm/°C (maximum)
  • Faster signal processing:
    • Wide bandwidth: 6.2MHz (G < 10), 2.4MHz (G = 50, 100)
    • High slew rate: 45V/µs at all gains
    • Settling time: 750ns to 0.01% (G < 20)
    • Input stage noise: 8.8nV/√Hz at G > 10V/V
    • Filter option to achieve better SNR
  • Input overvoltage protection to ±40V beyond supplies
  • Input-stage supply range:
    • Single supply: 9V to 36V
    • Dual supply: ±4.5V to ±18V
  • Independent output power-supply pins
  • Output-stage supply range:
    • Single supply: 4.5V to 36V
    • Dual supply: ±2.25V to ±18V
  • Specified temperature range: ­–40°C to +125°C
  • Small package: 3mm × 3mm VQFN

The PGA854 is a wide-bandwidth, high-voltage, low-noise programmable gain instrumentation amplifier with differential output. The PGA854 is equipped with eight decade (scope) gain settings, from an attenuating gain of 0.5V/V to a maximum of 100V/V. Gain is set using three digital gain selection pins.

The PGA854 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1MSPS without the need for an additional ADC driver. The output-stage power supplies are decoupled from the input stage to protect the ADC or downstream devices against overdrive damage.

The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3pA/√Hz, making the PGA854 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers exceptional gain flatness even at high frequencies, making the PGA854 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages of up to ±40V beyond the power-supply voltages.

The PGA854 is a wide-bandwidth, high-voltage, low-noise programmable gain instrumentation amplifier with differential output. The PGA854 is equipped with eight decade (scope) gain settings, from an attenuating gain of 0.5V/V to a maximum of 100V/V. Gain is set using three digital gain selection pins.

The PGA854 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1MSPS without the need for an additional ADC driver. The output-stage power supplies are decoupled from the input stage to protect the ADC or downstream devices against overdrive damage.

The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3pA/√Hz, making the PGA854 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers exceptional gain flatness even at high frequencies, making the PGA854 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages of up to ±40V beyond the power-supply voltages.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
신규 PGA848 활성 저잡음 광대역 정밀 프로그래머블 게인 증폭기 Single-ended version
PGA849 활성 저잡음 광대역 정밀 프로그래머블 게인 증폭기 Single-ended output alternative with binary gain options (0.125 to 16 V/V)
PGA855 활성 저잡음, 광대역, 완전 차동 출력 프로그래머블 게인 계측 증폭기 Drop-in alternative featuring binary gain range (0.125 to 16 V/V)

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet PGA854 Low-Noise, Wide-Bandwidth, Decade Gain, Precision Programmable Gain Instrumentation Amplifier datasheet (Rev. A) PDF | HTML 2025/12/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

PGA854EVM — PGA854 평가 모듈

PGA854 평가 모듈(PGA854EVM)은 정밀·저잡음·고대역폭 특성을 갖추고 완전 차동 출력을 제공하는 프로그래머블 게인 계측 증폭기(PGIA)인 PGA854을 평가하기 위한 개발 플랫폼입니다. PGA854에는 3개의 디지털 게인 선택 핀을 사용하는, 0.5V/V의 감쇠 게인부터 최대 100V/V까지 8개의 십진(범위) 게인 설정이 포함되어 있습니다.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

PGA855EVM — 완전 차동 출력 프로그래머블 게인 계측 증폭기용 PGA855 평가 모듈

PGA855 평가 모듈(EVM)은 차동 출력을 지원하는 고정밀 프로그래머블 게인 증폭기인 PGA855를 평가하기 위한 개발 플랫폼입니다. PGA855는 완전 차동 입력을 사용하여 고성능 ADC(아날로그-디지털 컨버터)의 입력을 구동하는 데 최적화되었습니다.

사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

PGA854 TINA-TI Reference Design

SBOMCS8.TSC (45 KB) - TINA-TI Reference Design
시뮬레이션 모델

PGA854 TINA-TI SPICE Model

SBOMCS9.ZIP (8 KB) - TINA-TI Spice Model
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGT) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상