SN74LVC2G08-Q1

활성

오토모티브, 2채널 2입력 1.65V~5.5V 32mA 드라이브 강도 AND 게이트

제품 상세 정보

Technology family LVC Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Number of channels 2 Inputs per channel 2 IOL (max) (mA) 32 IOH (max) (mA) -32 Input type Standard CMOS Output type Push-Pull Features Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns) Data rate (max) (Mbps) 100 Rating Automotive Operating temperature range (°C) -40 to 125
Technology family LVC Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Number of channels 2 Inputs per channel 2 IOL (max) (mA) 32 IOH (max) (mA) -32 Input type Standard CMOS Output type Push-Pull Features Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns) Data rate (max) (Mbps) 100 Rating Automotive Operating temperature range (°C) -40 to 125
SSOP (DCT) 8 11.8 mm² 2.95 x 4 VSSOP (DCU) 8 6.2 mm² 2 x 3.1
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range (DCU package)
    • Device Temperature Grade 3: –40°C to +85°C Ambient Operating Temperature Range (DCT package)
  • Supports 5-V VCC Operation
  • Inputs Accept Voltages to 5.5 V
  • Low Power Consumption, 10-µA Max ICC
  • ±24-mA Output Drive at 3.3 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Can be Used as a Down Translator to Translate Input from a Maximum of 5.5 V Down to the VCC Level.
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range (DCU package)
    • Device Temperature Grade 3: –40°C to +85°C Ambient Operating Temperature Range (DCT package)
  • Supports 5-V VCC Operation
  • Inputs Accept Voltages to 5.5 V
  • Low Power Consumption, 10-µA Max ICC
  • ±24-mA Output Drive at 3.3 V
  • Ioff Supports Partial-Power-Down Mode Operation
  • Can be Used as a Down Translator to Translate Input from a Maximum of 5.5 V Down to the VCC Level.
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

This dual 2-input positive-AND gate is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC2G08-Q1 performs the Boolean function Y = A • B or Y = /A + /B in positive logic.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

This dual 2-input positive-AND gate is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC2G08-Q1 performs the Boolean function Y = A • B or Y = /A + /B in positive logic.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
28개 모두 보기
유형 직함 날짜
* Data sheet SN74LVC2G08-Q1 Dual 2-Input Positive-AND Gate datasheet (Rev. E) PDF | HTML 2004/03/01
Selection guide Logic Guide (Rev. AC) PDF | HTML 2025/11/13
Application note Implications of Slow or Floating CMOS Inputs (Rev. E) 2021/07/26
Selection guide Little Logic Guide 2018 (Rev. G) 2018/07/06
Application note How to Select Little Logic (Rev. A) 2016/07/26
Application note Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) 2015/12/02
More literature Automotive Logic Devices Brochure 2014/08/27
User guide LOGIC Pocket Data Book (Rev. B) 2007/01/16
Product overview Design Summary for WCSP Little Logic (Rev. B) 2004/11/04
Application note Semiconductor Packing Material Electrostatic Discharge (ESD) Protection 2004/07/08
Application note Selecting the Right Level Translation Solution (Rev. A) 2004/06/22
User guide Signal Switch Data Book (Rev. A) 2003/11/14
Application note Use of the CMOS Unbuffered Inverter in Oscillator Circuits 2003/11/06
User guide LVC and LV Low-Voltage CMOS Logic Data Book (Rev. B) 2002/12/18
Application note Texas Instruments Little Logic Application Report 2002/11/01
Application note TI IBIS File Creation, Validation, and Distribution Processes 2002/08/29
More literature Standard Linear & Logic for PCs, Servers & Motherboards 2002/06/13
Application note 16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B) 2002/05/22
Application note Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices 2002/05/10
More literature STANDARD LINEAR AND LOGIC FOR DVD/VCD PLAYERS 2002/03/27
Application note Migration From 3.3-V To 2.5-V Power Supplies For Logic Devices 1997/12/01
Application note Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) 1997/08/01
Application note CMOS Power Consumption and CPD Calculation (Rev. B) 1997/06/01
Application note LVC Characterization Information 1996/12/01
Application note Input and Output Characteristics of Digital Integrated Circuits 1996/10/01
Application note Live Insertion 1996/10/01
Design guide Low-Voltage Logic (LVC) Designer's Guide 1996/09/01
Application note Understanding Advanced Bus-Interface Products Design Guide 1996/05/01

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

5-8-LOGIC-EVM — 5핀~8핀 DCK, DCT, DCU, DRL 및 DBV 패키지용 일반 논리 평가 모듈

5~8핀 수의 DCK, DCT, DCU, DRL 또는 DBV 패키지가 있는 모든 디바이스를 지원하도록 설계된 유연한 EVM.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

SN74LVC2G08 Behavioral SPICE Model

SCEM620.ZIP (7 KB) - PSpice Model
레퍼런스 디자인

PMP23242 — MPU(마이크로프로세서 유닛) 개별 오토모티브 전원 레퍼런스 설계

이 설계는 저비용 개별 전압 레귤레이터를 사용하는 전력 트리를 보여주며 AM62x-Q1 프로세서 제품군의 여러 전압 레일의 구체적인 전력 업/다운 시퀀싱 요구 사항을 자세히 설명합니다.
Test report: PDF
레퍼런스 디자인

PMP20978 — 고전압 GaN FET를 지원하는 높은 효율 및 전력 밀도 1kW 공진 컨버터 레퍼런스 디자인

PMP20978 레퍼런스 설계는 고효율, 높은 전력 밀도 및 경량 공진 컨버터 레퍼런스 설계입니다. 이는 390V 입력을 48V/1kW 출력으로 변환합니다. PMP20978 전력계의 전력 밀도는 140W/in^3 이상입니다. 전체 보드 중량은 230g 미만입니다. 고정 950kHz 스위칭 주파수를 정상 상태에서 사용하면 97.6%의 피크 효율을 달성할 수 있습니다. 
Test report: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00141 — 플립업 디스플레이용 차량용 브러시드 모터 드라이버

TIDA-00141 레퍼런스 설계는 푸시-투-오픈 및 푸시-투-클로즈 모터 드라이브 시스템을 위한 빠른 설정 가이드를 제공하여 인포테인먼트 시스템의 플립업 디스플레이 작동을 활성화합니다. 이 솔루션은 두 가지 피드백 방식도 함께 보여줍니다. 하나는 리미트 스위치를 사용하는 방식이고, 다른 하나는 모터 드라이버의 전류 제한 설정을 활용하는 방식입니다. 출시 일정을 앞당기기 위해 빠른 솔루션을 구현하는 이 설계는 차량용으로 인증된 모든 장치를 사용하고, 배터리에 직접 연결할 수 있으며, 소프트웨어 작업이 필요하지 않습니다.   이 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SSOP (DCT) 8 Ultra Librarian
VSSOP (DCU) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상