TAS2573
- Powerful class-D amplifier
- 8.5W 1% THD+N (8Ω at 4.4V)
- 8.8W 1% THD+N (4Ω at 4.4V)
- 15V boost with 5.1A max current limit
- Best in class efficiency
- Upto 89% efficiency at system level for 8Ω load
- 19mW idle channel power in active mode
- 5.5mW idle channel power in Noise gate mode
- Integrated 1.8V Y-bridge and 33mV step class-H
- High performance audio channel
- 4.2µV A-wt. idle channel noise
- 114dB Dynamic Range
- -90dB THDN
- Low EMI performance with ERC and SSM
- < 1µs chip to chip group delay matching
- Advanced integrated features
- Speaker Protection and Advanced Battery Guard with integrated IV sense
- Audio tuning with EQ, DRC, DEQ
- Speaker Rattle Noise Suppression algorithm
- Signal detection high efficiency modes
- High accuracy voltage monitor & temp sensor
- Ease of use features
- 1cell, 2cell and 3cell Li-ion battery support
- Clock based power up/down
- Auto clock rate detection: 16kHz to 192kHz
- External 14V PVDD supply support
- MCLK free operation
- Thermal and over current protection
- Programmable drive strength IO buffers
- Power Supplies and user interface
- VBAT: 2.0V to 5.5V
- VDD: 1.65V to 1.95V
- IOVDD: 1.2V or 1.8V
- VBAT_SNS: 2.0V to 10.0V
- PVDD: 2.5V to 14V (Ext. PVDD mode)
- I2S/TDM: 8 channels
- I2C: 4 selectable addresses
- 48-Ball, 0.35mm Pitch, WCSP package
The TAS2573 is a digital input Class-D amplifier with an integrated Boost for higher power delivery in battery-operated systems. The device has integrated IV-Sense for real-time monitoring of the loudspeakers. An on-chip, low-latency DSP supports Texas Instruments SmartAmp speaker protection and audio tuning algorithms to enable high output SPL while keeping speakers in a safe operating region.
The device is optimized for delivering the best battery life with advanced efficiency optimization features like Class-H, Y-bridge and DSP algorithms. An advanced battery guard algorithm on the DSP manages peak output power delivery while avoiding any audio distortion when battery capacity is depleting. This algorithm is supported using a local battery voltage monitor ADC.
Up to four TAS2573 amps can share a common bus via I2S/TDM + I2C interfaces.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TAS2573 Boosted Class-D Audio Amplifier with Integrated DSP and IV Sense datasheet | PDF | HTML | 2026. 10. 1 | |
| 애플리케이션 노트 | TAS2573 Design and Layout Guidelines | PDF | HTML | 2026. 6. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AA-EVM-MB — Audio amplifiers motherboard evaluation module
TAS2573EVM — TAS2573 평가 모듈
TAS2573-GUI — TAS2573 PurePath™ Console 3 files
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YCF) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.