TAS5414C
- Four-Channel Single-Ended Analog Input Class-D Audio Amplifier
- Typical Output Power at 10% THD+N
- 28 W/Ch Into 4 Ω at 14.4 V
- 50 W/Ch Into 2 Ω at 14.4 V
- 79 W/Ch Into 4 Ω at 24 V
- 150 W/Ch Into 2 Ω at 24 V (PBTL)
- Channels Can Be Paralleled (PBTL) for High-Current Applications
- THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
- Patented Pop- and Click-Reduction Technology
- Soft Muting With Gain Ramp Control
- Common-Mode Ramping
- Patented AM Interference Avoidance
- Patented Cycle-by-Cycle Current Limit
- 75-dB PSRR
- Four-Address I2C Serial Interface for Device Configuration and Control
- Channel Gains: 12-dB, 20-dB, 26-dB, 32-dB
- Load Diagnostic Functions:
- Output Open and Shorted Load
- Output-to-Power and -to-Ground Shorts
- Patented Tweeter Detection
- Protection and Monitoring Functions:
- Short-Circuit Protection
- Load-Dump Protection to 50 V
- Fortuitous Open-Ground and -Power Tolerant
- Patented Output DC Level Detection While Music Playing
- Overtemperature Protection
- Over- and Undervoltage Conditions
- Clip Detection
- 64-Pin QFP (PHD) Power Package With Heat Slug Up
- –20°C to 105°C Ambient Temperature Range
The TAS5414C is a four-channel Class-D audio amplifier designed for use in automotive head units and external amplifier modules. It provides four channels at 23 W continuously into 4 Ω at less than 1% THD+N from a 14.4-V supply. Each channel can also deliver 38 W into 2 Ω at 1% THD+N. The TAS5414C uses single-ended analog inputs. The class-D PWM topology of the device provides dramatic improvements in efficiency over traditional linear amplifier solutions. This reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device has a built-in load diagnostic functions for detecting and diagnosing misconnected outputs to help to reduce test time during the manufacturing process.
추가 정보 요청
차세대 27W, 2MHz 디지털 입력 4채널 차량용 클래스 D 오디오 증폭기: TAS6424L-Q1
차세대 75W, 2MHz 디지털 입력 4채널 오토모티브 클래스 D 오디오 증폭기: TAS6424-Q1
차세대 75W, 2MHz 디지털 입력 2채널 오토모티브 클래스 D 오디오 증폭기: TAS6422-Q1
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TAS5414C Four-Channel Aftermarket Automotive Class-D Amplifier datasheet | PDF | HTML | 2016/12/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DIX4192EVM-PDK — DIX4192 평가 모듈(EVM) 및 USB 마더보드
DIX4192EVM-PDK는 텍사스 인스트루먼트의 DIX4192 장치의 기능과 성능을 평가하기 위한 모듈식 솔루션을 제공합니다. 이 PDK에는 마더보드(DAIMB)와 도터보드(DIX4192EVM)가 포함되어 있습니다. 도터보드 및 마더보드는 함께 TI DIX4192 통합 회로의 기능과 성능을 평가하기 위한 모듈식 플랫폼을 구성합니다. DIX4192 장치에 필수적인 레지스터 및 데이터 버퍼를 쓰고 읽을 수 있도록 PDK와 함께 애플리케이션 소프트웨어가 제공됩니다. 이 소프트웨어는 DAIMB의 USB 슬레이브 인터페이스를 사용하여 (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PHD) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치