TDA2HG
- Architecture designed for ADAS applications
- Video, image, and
gaphics processing support
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video input and video output
- Dual Arm® Cortex®-A15 microprocessor subsystem
- Up to two C66x floating-point VLIW DSP
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-Bit fixed-point multiplies per cycle
- Up to 2.5MB of on-chip L3 RAM
- Level 3 (L3) and level 4 (L4) interconnects
- Two DDR2/DDR3/DDR3L memory interface (EMIF) modules
- Supports up to DDR2-800 and DDR3-1066
- Up to 2GB supported per EMIF
- Dual Arm® Cortex®-M4 Image Orocessing Units (IPU)
- Vision acceleration
pac
- Up to four Embedded Vision Engines (EVEs)
- IVA-HD subsystem
- Display
subsystem
- Display controller with DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- 2D-graphics
accelerator (BB2D) subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- Dual-core PowerVR® SGX544 3D GPU
- Three Video Input Port (VIP) modules
- Support for up to 10 multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- 2-port gigabit ethernet (GMAC)
- Enhanced Direct Memory Access (EDMA) controller
- Dual Controller Area Network (DCAN) modules
- CAN 2.0B protocol
- PCI-Express® 3.0 port with integrated PHY
- One 2-lane gen2-compliant port
- or two 1-lane gen2-compliant ports
- Sixteen 32-bit general-purpose timers
- 32-bit MPU watchdog timer
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad SPI interface
- Five Inter-Integrated Circuit (I2C) ports
- SATA interface
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- Three high-speed USB 2.0 dual-role devices
- Four Multimedia Card/Secure Digital/Secure Digital Input Output interfaces (MMC®/SD®/SDIO)
- Up to 247 General-Purpose I/O (GPIO) pins
- Real-Time Clock SubSystem (RTCSS)
- Device security features
- Hardware crypto accelerators and DMA
- Firewalls
- JTAG® lock
- Secure keys
- Secure ROM and boot
- Power, Reset, and Clock Management (PRSM)
- On-chip debug with CTools technology
- Automotive AEC-Q100 qualified
- 28-nm CMOS technology
- 23 mm × 23 mm, 0.8-mm pitch, 760-Pin BGA (ABC)
TI’s new TDA2x System-on-Chip (SoC) is a highly optimized and scalable family of devices designed to meet the requirements of leading Advanced Driver Assistance Systems (ADAS). The TDA2x family enables broad ADAS applications in automobiles by integrating an optimal mix of performance, low power and ADAS vision analytics processing that aims to facilitate a more autonomous and collision-free driving experience.
The TDA2x SoC enables sophisticated embedded vision technology in automobiles by broadest range of ADAS applications including front camera, park assist, surround view and sensor fusion on a single architecture.
The TDA2x SoC incorporates a heterogeneous, scalable architecture that includes a mix of TI’s fixed and floating-point TMS320C66x digital signal processor (DSP) generation cores, Vision AccelerationPac, Arm® Cortex®-A15 MPCore™ and dual-Cortex-M4 processors. The integration of a video accelerator for decoding multiple video streams over an Ethernet AVB network, along with graphics accelerators for rendering virtual views, enable a 3D viewing experience. And the TDA2x SoC also integrates a host of peripherals including multi-camera interfaces (both parallel and serial) for LVDS-based surround view systems, displays, CAN and GigB Ethernet AVB.
The Vision AccelerationPac for this family of products includes multiple embedded vision engines (EVEs) offloading the vision analytics functionality from the application processor while also reducing the power footprint. The Vision AccelerationPac is optimized for vision processing with a 32-bit RISC core for efficient program execution and a vector coprocessor for specialized vision processing.
Additionally, TI provides a complete set of development tools for the Arm, DSP, and EVE coprocessor, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
The TDA2x ADAS processor is qualified according to the AEC-Q100 standard.
추가 정보 요청
이 제품군은 대량 자동차 제조업체가 사용할 수 있습니다. 자세한 내용은 TI 판매 담당자에 문의하십시오.
고급 운전자 지원 시스템(ADAS)용 TDAx SoC에 대해 자세히 알아보십시오.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
D3-3P-DEV — AI 카메라, 하드웨어, 드라이버 및 펌웨어에 대한 D3 임베디드 지원
D3 Embedded는 미국에 본사를 둔 기업으로, 비전과 mmWave 레이더 감지, 연결, 임베디드 프로세싱, AI를 통합해 고성능 응용 분야를 위한 포괄적인 솔루션을 제작하는 전문 업체입니다. D3 Embedded는 개발 부문에서 25년 넘게 축적한 경력을 바탕으로 사용자 지정 소프트웨어와 하드웨어 개발 서비스, ISP 기반 이미지 튜닝, AI와 알고리즘, 복잡한 DSP 프로세싱 체인 개발 서비스를 제공합니다. 특히 사내 전문가로 구성된 레이더 및 DSP 팀은 텍사스 인스트루먼트의 애플리케이션별 프로세서에 적합한 맞춤형 (...)
D3-3P-RVP-TDA2X — TDA2 프로세서용 D3 임베디드 DesignCore® RVP-TDA2x 개발 키트
RVP-TDA2x는 하이엔드 ADAS 시스템을 위한 다중 카메라 플랫폼입니다. ARM A15 애플리케이션 프로세서 2개, 최대 4개의 EVE(Vision Acceleration PAC) 코프로세서, 하드웨어 가속 H.264 인코더가 포함되어 있습니다. 개발 키트는 8개의 카메라 입력을 지원하지만 필요에 따라 사용자 지정할 수 있습니다. 키트 구매에는 소프트웨어 배포 및 일회용 라이센스가 포함됩니다.
PROCESSOR-SDK-RADAR — RTOS Processor SDK for Radar
Processor SDK-Vision(Vision SDK) 및 Processor SDK-Radar(Radar SDK)는 TDAx 프로세서용 멀티 프로세서 소프트웨어 개발 키트입니다. 소프트웨어 프레임워크는 사용자가 레이더 및 비디오 캡처, 레이더 처리, 비디오 캡처, 비디오 전처리, 비디오 분석 알고리즘 및 비디오 디스플레이와 관련된 여러 ADAS 애플리케이션 데이터 흐름을 만들도록 지원합니다. . 또한 이 릴리스에는 프로세서 SDK Linux가 통합되어 Linux 및 GPU가 필요한 차량용 ADAS 기능과 데모를 지원합니다. (...)
PROCESSOR-SDK-VISION — Linux and RTOS Processor SDK for Vision
Processor SDK-Vision(Vision SDK) 및 Processor SDK-Radar(Radar SDK)는 TDAx 프로세서용 멀티 프로세서 소프트웨어 개발 키트입니다. 소프트웨어 프레임워크는 사용자가 레이더 및 비디오 캡처, 레이더 처리, 비디오 캡처, 비디오 전처리, 비디오 분석 알고리즘 및 비디오 디스플레이와 관련된 여러 ADAS 애플리케이션 데이터 흐름을 만들도록 지원합니다. . 또한 이 릴리스에는 프로세서 SDK Linux가 통합되어 Linux 및 GPU가 필요한 차량용 ADAS 기능과 데모를 지원합니다. (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
QNX-3P-NEUTRINO-RTOS — QNX Neutrino RTOS
MOMENTA-3P-DL-ALGORITHMS — TDA4x 프로세서의 ADAS 전방 카메라 애플리케이션을 위한 Momenta 딥 러닝 알고리즘
Momenta’s deep learning based algorithms for ADAS applications make full use of the DSP cores and accelerators on TDA4x for neural network processing. Designed to achieve market leading computational and power efficiency, Momenta’s algorithms offer an array of pre- and post-imaging (...)
CLOCKTREETOOL — Sitara, 오토모티브, 비전 분석 및 디지털 신호 프로세서용 클록 트리 툴
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCBGA (ABC) | 760 | Ultra Librarian |