THS4601
- Gain Bandwidth Product: 180 MHz
- Slew Rate: 100 V/us
- Maximum Input Bias Current: 100 pA
- Input Voltage Noise: 5.4 nV/Hz
- Maximum Input Offset Voltage: 4 mV
- Input Impedance: 109 || 10 pF
- Power Supply Voltage Range: ±5 to ±15 V
- Unity Gain Stable
- APPLICATIONS
- Wideband Photodiode Amplifier
- High-Speed Transimpedance Gain Stage
- Test and Measurement Systems
- Current-DAC Output Buffer
- Active Filtering
- High-Speed Signal Integrator
- High-Impedance Buffer
The THS4601 is a high-speed, FET-input operational amplifier designed for applications requiring wideband operation, high-input impedance, and high-power supply voltages. By providing a 180-MHz gain-bandwidth product, ±15-V supply operation, and 100-pA input bias current, the THS4601 is capable of wideband transimpedance gain and large output signal swing simultaneously. Low current and voltage noise allow amplification of extremely low-level input signals while still maintaining a large signal-to-noise ratio.
The characteristics of the THS4601 ideally suit it for use as a wideband photodiode amplifier. Photodiode output current is a prime candidate for transimpedance amplification, an application of which is illustrated in Figure 1. Other potential applications include test and measurement systems requiring high-input impedance, digital-to-analog converter output buffering, high-speed integration, and active filtering.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | Wideband, FET-Input Operational Amplifier datasheet (Rev. B) | 2002/06/04 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017/03/28 | ||
Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/01/17 | ||
EVM User's guide | THS4601EVM User's Guide | 2002/10/08 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ANALOG-ENGINEER-CALC — 아날로그 엔지니어의 계산기
VOLT-DIVIDER-CALC — Voltage divider calculation tool
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | 다운로드 |
---|---|---|
HSOIC (DDA) | 8 | 옵션 보기 |
SOIC (D) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치