TMAG5123-Q1
- AEC-Q100
qualified for automotive applications:
- Temperature grade 0: –40°C To +150°C, TA
- In-plane, omnipolar Hall-effect switch
- High magnetic sensitivity:
- TMAG5123B -Q1: 4.1 mT (typical)
- TMAG5123C -Q1: 7.5 mT (typical)
- TMAG5123D -Q1: 10.9 mT (typical)
- Supports a wide voltage range
- 2.7-V to 38-V operating VCC range
- No external regulator required
- 30kHz continuous conversion
- Open-drain output
- SOT-23 package option
- Protection features
- Supports up to 40-V load dump
- Reverse battery protection to –20-V
- Output short-circuit protection
- Output current limitation
The TMAG5123-Q1 is a chopper-stabilized omnipolar, active-low, in-plane, Hall-effect switch sensor. The TMAG5123-Q1 eases mechanical placement of the sensor by measuring magnetic fields parallel to the surface of the printed circuit board (PCB) in a surface mount SOT-23 package.
Different sensitivity levels are available to match the specific requirement of the application. When the applied magnetic flux density value exceeds the operating point (BOP) threshold in absolute magnetic field values, the open-drain output produces a low-state voltage. The output remains low until the applied field decreases to less than the release point (BRP) threshold also in absolute terms.
The TMAG5123-Q1 incorporates a wide 2.7-V to 38-V operating voltage range and reverse polarity protection of up to -20-V, enabling robust operation for industrial and automotive applications.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TMAG5123-Q1 Automotive In-Plane, High-Precision, High-Voltage, Hall-Effect Switch datasheet (Rev. A) | PDF | HTML | 2021. 8. 25 | |
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023. 12. 5 | ||
| 사용 설명서 | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023. 12. 4 | ||
| Application brief | Sensing Magnetic Fields In-Plane Versus Out-of-Plane (Rev. C) | PDF | HTML | 2022. 8. 31 | ||
| Application brief | Transition Detection Using Hall-Effect Sensors (Rev. A) | PDF | HTML | 2022. 6. 9 | ||
| 기능 안전 정보 | TMAG5123-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2022. 1. 27 | ||
| 애플리케이션 노트 | HMI Rocker Switch With Hall-Effect Switches | PDF | HTML | 2022. 1. 21 | ||
| Application brief | Multi-State Position Selection Using Hall-Effect Sensors | PDF | HTML | 2022. 1. 13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMAG5123EVM — TMAG5123 평면 내 고정밀 홀 효과 스위치 평가 모듈(EVM)
TMAG5123은 설계에서 더 많은 유연성을 얻기 위해 더 높은 자기 정밀도가 필요한 시스템의 과제를 위해 설계된 고정밀, 넓은 VIN, 평면 내 홀 효과 센서 제품군입니다. TMAG5123 평가 모듈(EVM)에는 Sensata 499-P36-20 테스트 소켓이 장착되어 있어 TMAG5123 제품군의 모든 변형을 정밀 테스트할 수 있습니다. 각 장치는 서로 다른 감도를 나타내므로 각 감도를 애플리케이션에서 사용할 수 있도록 테스트할 수 있습니다. TMAG5123은 2.5V~38V의 VCC 범위에서 작동하며 표준 SOT-23 (...)
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN은 자석 및 홀(Hall) 효과 센서 시스템을 위한 신속한 반복 설계를 도와주는 소프트웨어 도구입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.