TPS1212-Q1
- AEC-Q100 automotive qualified for grade 1 temperature
- Functional Safety-Capable
- 3.5V to 73V input range (74V absolute maximum)
- Reverse input and output protection down to –65V
- Integrated 12V charge pump
- Low IQ = 20µA in low power mode (LPM = Low)
- Low 1µA shutdown current (EN/UVLO = Low)
- Dual gate drive: GATE: 0.5A src/2A sink, G: 100µA src/0.39A sink
- Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
- Accurate and fast (5µs) short-circuit protection
- Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
- Accurate analog bi-directional current monitor output (IMON, I_DIR): ±2% at 30mV VSNS
- NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
- Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO, overtemperature
- TPS12120-Q1 (I2t enabled), TPS12121-Q1 (I2t disabled)
- Accurate (±2%) and adjustable undervoltage lockout (UVLO)
TPS1212-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 73V, 74V absmax the device is suitable for 12V, 24V, and 48V automotive system designs.
The devices have two integrated gate drives with 0.5A/2A (GATE) and 100µA/0.39A (G). With LPM low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). The auto load wakeup threshold is adjusted using RBYPASS resistor placed across DRN and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.
The device has accurate bi-directional current sensing (±2%) output (IMON) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.
The TPS1212-Q1 is available in 23-pin VQFN package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS1212-Q1 Low IQ Automotive High-Side Switch Controller With Bi-directional IMON, Low Power Mode, Load Wakeup, I2t, and Diagnostics datasheet | PDF | HTML | 2025. 4. 14 | |
| 애플리케이션 노트 | Basics of High-Side Switches and Controllers | PDF | HTML | 2026. 3. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS4812Q1EVM — 스마트 고압측 드라이버용 TPS48120QRGERQ1 평가 모듈
TPS4812Q1EVM을 사용하면 TPS4812-Q1 스마트 고압측 드라이버의 레퍼런스 회로를 평가할 수 있습니다. TPS4812-Q1은 3.5V~95V의 스마트 고압측 컨트롤러이며, 별도의 제어 입력을 가진 강력한 2A 게이트 드라이버 2개가 있어 자동 부하 활성화 옵션을 가진 저전력 경로 모드를 포함한 여러 구성이 가능합니다. TPS4812-Q1은 양방향 전류 모니터링과 조정 가능한 I2t 기반 과전류 및 단락 보호 기능, 구성 가능한 자동 재시도 및 래치 오프 오류 동작을 지원합니다.
TPS4812-Q1-CALC — TPS4812-Q1 design calculator
PMP41150 — 1000W, 48V 스위치드 커패시터 컨버터 레퍼런스 설계
이 레퍼런스 설계는 높은 전력 밀도 달성과 소형 전력단(70mm × 55mm × 2.85mm)을 위해 인덕터리스 스위치 커패시터 변환 토폴로지를 사용합니다. TLC555-Q1 타이머를 활용하는 간단한 제어 체계는 4:1 또는 3:1 변환 비율로 고정 변환 비율 출력을 가능하게 하며 다양한 전력 분배 요구 사항에 맞게 설정할 수 있습니다. 4:1 변환 비율의 경우 최대 부하 효율은 96.7%이고 피크 효율은 98.5%(Iout=30A)입니다. 3:1 변환 비율의 경우 최대 부하 효율은 97.6%이고 피크 효율은 (...)
TIDA-020094 — 48V 영역 레퍼런스 설계
이 레퍼런스 설계에서는 고급 차량용 48V 저전압 레일 아키텍처의 동향을 보여줍니다. 이 설계에는 48V 백본 아키텍처 및 48V-12V 전력 변환 기능이 포함되어 있습니다. 이 레퍼런스 설계에서는 주요 제품에서 사용할 수 있는 48V 부하 드라이버를 보여줍니다. 이러한 제품으로는 HSS(고압측 스위치) 및 HSSC(고압측 스위치 컨트롤러), 스마트 eFuse 및 MD(모터 드라이버)가 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 23 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.