TPS2661
- ±50-V operating voltage, ±55-V absolute maximum
- Integrated fixed bipolar 32-mA current limit
- Allows 2x current limit at start-up
- 50% space savings compared to a typical discrete protection circuit
- Low R-on: 7.5-Ω typical
- Low IQ (< 100 nA) – current drawn from loop when powered from external supply
- Protection against miswiring conditions on IN and OUT
- Protection during signal line surge IEC61000-4-5 (with external TVS)
- Criteria-A EFT (IEC61000-4-4) immunity (with external TVS)
- Supports loop testing without supply (TPS26610 only)
- HART compliant
- Enable control
- SGOOD for system health monitoring
- Thermal shutdown
The TPS2661x is a compact, feature-rich, fully integrated current loop protector suitable for analog inputs, analog outputs, sensor transmitters, HART inputs, and UART IO protection. The device provides universal input protection for ±20 mA, 0 mA to 20 mA, and 4 mA–20 mA. Low RON values of 7.5 Ω minimizes drop in the current loop, thereby extending operating range and supporting operation even with lower voltage power supplies. The device can withstand and protect the loads from positive and negative supply voltages up to ±50 V. The MODE pin allows flexibility to enable 2x current limit through the device to enable proper start-up of two wire transmitters. Device is capable of operating from an external bipolar supply as low as ± 2.25 V to ±20 V. The device can also be powered from unipolar supplies as low as 3 V to 30 V. The TPS26610 and TPS26613 feature loop power mode to facilitate loop testing in un-powered state without ±Vs supplies.
The device also protects the system from output side miswiring in analog outputs and sensor transmitters by turning off the current path. The internal robust protection control blocks along with the 50-V rating of the TPS2661x help to protect against surge (IEC61000-4-5) and EFT (IEC61000-4-4) transients for signal lines. The device greatly reduces system footprint by its 2.9-mm × 1.6-mm 8-pin SOT-23 package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS2661x: 50-V, Universal 4–20 mA, ±20-mA Current Loop Protector With Input and Output Miswiring Protection datasheet (Rev. C) | PDF | HTML | 2021. 12. 8 | |
| Circuit design | Output Overvoltage Protection Circuit for Voltage DACs Without an External Feedback Pin | PDF | HTML | 2025. 6. 18 | ||
| 인증서 | TPS2661 UL2367 Certificate of Compliance E169910 | 2023. 2. 9 | |||
| 애플리케이션 노트 | Cost-Optimized, High-Performance Front-End Design for Analog Input Modules | PDF | HTML | 2022. 6. 22 | ||
| 애플리케이션 노트 | Protection for HART I/O in Analog Input and Output Modules with TPS2661x | PDF | HTML | 2021. 9. 9 | ||
| 애플리케이션 노트 | New Approach to Protect 4–20 mA, ±20-mA Analog Input | PDF | HTML | 2021. 7. 6 | ||
| 인증서 | TPS2661EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) | 2021. 2. 17 | |||
| 애플리케이션 노트 | Enabling Smarter, Integrated Protection for 4-20mA Current Loops with eFuses | PDF | HTML | 2020. 12. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS2661EVM — TPS2661x 전류 루프 보호기 평가 모듈
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
TIDA-011026 — 필드 트랜스미터 플랫폼: 3선 4mA~20mA 인터페이스 레퍼런스 설계
이 레퍼런스 설계는 3선 전압 및 전류 인터페이스 센서를 위해 4~20mA 인터페이스를 구현하는 예시를 보여줍니다. 이 설계를 통해 전류 루프 보호기 TPS2661과 함께 XTR200을 평가할 수 있습니다. XTR200은 4~20mA, 0~20mA 및 0~10V와 같은 표준 산업용 신호 레벨을 사용하는 전압 및 전류 필드 트랜스미터 통신 인터페이스용 출력 구동 회로를 통합하고 있습니다. 이 레퍼런스 설계는 핀 헤더를 통해 출력 단계를 구동하는 PWM(펄스 폭 변조) 인터페이스에 액세스할 수 있도록 합니다. 이 핀 헤더는 연결된 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.