전력 관리 통제기 및 리셋 IC 리셋 및 워치독 IC

TPS3838

활성

수동 리셋을 지원하는 능동 저압측, 오픈 드레인, 나노파워 통제기

제품 상세 정보

Rating Catalog Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 1.71, 2.25, 2.64, 2.93 Features Manual reset capable, Reset time delay, Undervoltage monitor only Reset threshold accuracy (%) 1.75 Iq (typ) (mA) 0.00022 Output driver type/reset output Active-low, Open-drain Time delay (ms) 10, 200 Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
Rating Catalog Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 1.71, 2.25, 2.64, 2.93 Features Manual reset capable, Reset time delay, Undervoltage monitor only Reset threshold accuracy (%) 1.75 Iq (typ) (mA) 0.00022 Output driver type/reset output Active-low, Open-drain Time delay (ms) 10, 200 Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
WSON (DRV) 6 4 mm² (2 mm × 2 mm) SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • Supply current: 220 nA (typical)
  • Precision supply voltage supervision range:
    1.8 V, 2.5 V, 3.0 V, and 3.3 V
  • Power-on reset generator with selectable delay time: 10 ms or 200 ms
  • Push and pull RESET output (TPS3836),
    Push and pull RESET output (TPS3837), or open-drain RESET output (TPS3838)
  • Manual reset
  • 5-pin SOT23 and 2-mm × 2-mm, 6-pin SON packages
  • Temperature range: –40°C to 85°C
  • Supply current: 220 nA (typical)
  • Precision supply voltage supervision range:
    1.8 V, 2.5 V, 3.0 V, and 3.3 V
  • Power-on reset generator with selectable delay time: 10 ms or 200 ms
  • Push and pull RESET output (TPS3836),
    Push and pull RESET output (TPS3837), or open-drain RESET output (TPS3838)
  • Manual reset
  • 5-pin SOT23 and 2-mm × 2-mm, 6-pin SON packages
  • Temperature range: –40°C to 85°C

The TPS3836, TPS3837, and TPS3838 device families of supervisory circuits provide circuit initialization and timing supervision, primarily for digital signal processors (DSP) and processor-based systems.

During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output active as long as VDD remains below the threshold voltage of VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD rises above the threshold voltage VIT.

When CT is connected to GND, a fixed delay time of typically 10 ms is asserted. When connected to VDD, the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider.

The TPS3836 has an active-low, push-pull RESET output. The TPS3837 has an active-high, push-pull RESET, and the TPS3838 integrates an active-low, open-drain RESET output. The product spectrum is designed for supply voltages of 1.8 V, 2.5 V, 3.0 V, and 3.3 V. The circuits are available in either a SOT23-5 or a 2-mm × 2-mm SON-6 package. The TPS3836, TPS3837, and TPS3838 families are characterized for operation over a temperature range of –40°C to 85°C.

The TPS3836, TPS3837, and TPS3838 device families of supervisory circuits provide circuit initialization and timing supervision, primarily for digital signal processors (DSP) and processor-based systems.

During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output active as long as VDD remains below the threshold voltage of VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD rises above the threshold voltage VIT.

When CT is connected to GND, a fixed delay time of typically 10 ms is asserted. When connected to VDD, the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider.

The TPS3836 has an active-low, push-pull RESET output. The TPS3837 has an active-high, push-pull RESET, and the TPS3838 integrates an active-low, open-drain RESET output. The product spectrum is designed for supply voltages of 1.8 V, 2.5 V, 3.0 V, and 3.3 V. The circuits are available in either a SOT23-5 or a 2-mm × 2-mm SON-6 package. The TPS3836, TPS3837, and TPS3838 families are characterized for operation over a temperature range of –40°C to 85°C.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS3840 활성 수동 리셋 및 프로그래머블 리셋 시간 지연을 지원하는 나노파워 고입력 전압 통제기 TPS3840 offers more threshold voltage options (1.6 V to 4.9 V) with low 0.3-uA quiescent current and more accurate reset threshold.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
11개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS383x Nano Power Voltage Supervisor With Selectable Reset Delay datasheet (Rev. F) PDF | HTML 2019. 9. 11
선택 가이드 Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) 2020. 2. 28
e북 Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019. 6. 28
사용 설명서 DLPC350 Programmer’s Guide (Rev. G) 2018. 7. 5
설계 가이드 TIDA-00570 Test Results (Rev. A) 2017. 8. 1
사용 설명서 TIDA-00254 User's Guide (Rev. B) 2017. 7. 26
테스트 보고서 TIDA-00254 Test Results (Rev. A) 2016. 4. 21
Product overview TI DLP® Technology for 3D Machine Vision (Rev. C) 2016. 4. 8
추가 자료 DLP Point Cloud Generation and 3D Machine Vision Reference Design 2014. 7. 22
테스트 보고서 DLP4500-C350REF Test Results 2013. 9. 12
애플리케이션 노트 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011. 9. 19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

지원 소프트웨어

TIDC535 — TIDA-00254 Windows Installer

지원되는 제품 및 하드웨어
레퍼런스 디자인

DLP4500-C350REF — DLP 기술을 사용한 고해상도, 휴대용 조명 스티어링 레퍼런스 디자인

This reference design, featuring the DLP® 0.45” WXGA chipset and implemented in the DLP® LightCrafter™ 4500 evaluation module (EVM), enables flexible control of high resolution, accurate patterns for industrial, medical, and scientific applications. With a free USB-based GUI and (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00254 — DLP® 기술을 사용한 3D 머신 비전 애플리케이션을 위한 정확한 점 클라우드 생성

The 3D Machine Vision reference design employs Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00570 — 산업용 3D 프린팅 및 디지털 노광을 위한 고속 DLP 서브시스템 레퍼런스 디자인

The High Speed DLP® Sub-system Reference Design provides system-level DLP development board designs for industrial Digital Lithography and 3D Printing applications that require high resolution, superior speed and production reliability. The system design offers maximum throughput by integrating (...)

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
WSON (DRV) 6 Ultra Librarian
SOT-23 (DBV) 5 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상