전원 관리 AC/DC & DC/DC controllers (external FET)

TPS40400

활성

원격 측정을 포함하여 PMBus™를 지원하는 3V~20V, 30A 동기형 벅 컨트롤러

제품 상세 정보

Vin (min) (V) 3 Vin (max) (V) 20 Iout (max) (A) 30 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 5 Iq (typ) (A) 0.006 Duty cycle (max) (%) 90
Vin (min) (V) 3 Vin (max) (V) 20 Iout (max) (A) 30 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 5 Iq (typ) (A) 0.006 Duty cycle (max) (%) 90
VQFN (RHL) 24 19.25 mm² 5.5 x 3.5
  • Input Operating Voltage Range: 3 V to 20 V
  • PMBus Enabled Analog Controller
  • Reference 600 mV ± 1%
  • Remote Voltage Sense Amplifier
  • Internal 6-V Regulator and 6-V Gate Drive
  • Programmable Overcurrent Protection
  • Inductor Resistance or Series Resistance Used for Current Sensing
  • Programmable Switching Frequency: 200 kHz to 2 MHz
  • Powergood Indicator
  • Thermal Shutdown
  • Programmable Soft-Start
  • Internal Bootstrap Diode
  • Prebias Output Safe
  • 24-Pin QFN Package
  • Input Operating Voltage Range: 3 V to 20 V
  • PMBus Enabled Analog Controller
  • Reference 600 mV ± 1%
  • Remote Voltage Sense Amplifier
  • Internal 6-V Regulator and 6-V Gate Drive
  • Programmable Overcurrent Protection
  • Inductor Resistance or Series Resistance Used for Current Sensing
  • Programmable Switching Frequency: 200 kHz to 2 MHz
  • Powergood Indicator
  • Thermal Shutdown
  • Programmable Soft-Start
  • Internal Bootstrap Diode
  • Prebias Output Safe
  • 24-Pin QFN Package

The TPS40400 is a cost-optimized flexible synchronous buck controller that operates from a nominal 3-V to 20-V supply. This controller is an analog PWM controller that allows programming and monitoring through the PMBus™ interface. Flexible features found on this device include programmable soft-start time, programmable short circuit limit, and programmable undervoltage lockout (UVLO).

An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs. Gate drive voltage is 6 V to better enhance the power FETs for reduced losses. Short circuit detection occurs by sensing the voltage drop across the inductor or across a resistor placed in series with the inductor. A PMBus programmable threshold is compared to this voltage and is used to detect overcurrent. When the overcurrent threshold is reached, a pulse by pulse current limit scheme is used to limit the current to acceptable levels. If the overcurrent condition persists for more than 7 clock cycles of the converter, a fault condition is declared and the converter shuts down and goes into either a hiccup restart mode or latches off. The behavior can be selected through the PMBus interface. Other PMBus interface features include programmable operating frequency, soft-start time, overvoltage and undervoltage thresholds and the response to those events, output voltage change including margining as well as status monitoring.

The TPS40400 is a cost-optimized flexible synchronous buck controller that operates from a nominal 3-V to 20-V supply. This controller is an analog PWM controller that allows programming and monitoring through the PMBus™ interface. Flexible features found on this device include programmable soft-start time, programmable short circuit limit, and programmable undervoltage lockout (UVLO).

An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs. Gate drive voltage is 6 V to better enhance the power FETs for reduced losses. Short circuit detection occurs by sensing the voltage drop across the inductor or across a resistor placed in series with the inductor. A PMBus programmable threshold is compared to this voltage and is used to detect overcurrent. When the overcurrent threshold is reached, a pulse by pulse current limit scheme is used to limit the current to acceptable levels. If the overcurrent condition persists for more than 7 clock cycles of the converter, a fault condition is declared and the converter shuts down and goes into either a hiccup restart mode or latches off. The behavior can be selected through the PMBus interface. Other PMBus interface features include programmable operating frequency, soft-start time, overvoltage and undervoltage thresholds and the response to those events, output voltage change including margining as well as status monitoring.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기9
유형 직함 날짜
* Data sheet TPS40400 3-V to 20-V PMBus Synchronous Buck Controller datasheet (Rev. D) PDF | HTML 2016/11/07
User guide TPS40400 Buck Controller Evaluation Module User's Guide (Rev. A) PDF | HTML 2022/01/03
Analog Design Journal Maximizing power density and thermal performance in power-module designs 2018/12/12
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Selection guide DC/DC Buck Controller Solutions Selection Guide 2018/02/06
Application note SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC 2016/02/22
Technical article Select the correct PMBus POL solution for your application PDF | HTML 2015/08/03
Analog Design Journal 2Q 2012 Issue Analog Applications Journal 2012/04/26
Analog Design Journal Remote sensing for power supplies 2012/04/26

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS40400EVM-351 — TPS40400 PMBus 동기 벅 컨트롤러용 평가 모듈

The TPS40400EVM-351 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS40400 PMBus Synchronous Buck Controller in a typical single output application. The EVM is designed to use a regulated 8Vdc to 14Vdc bus to produce a regulated output of 1.2Vdc at a maximum of (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
애플리케이션 소프트웨어 및 프레임워크

FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어

Fusion Digital Power™ GUI(그래픽 사용자 인터페이스) 소프트웨어는 선별된 텍사스 인스트루먼트 디지털 파워 컨트롤러와 시퀀서/상태 모니터를 구성하고 모니터링하는 데 사용됩니다. 이 애플리케이션은 PMBus 프로토콜을 사용하여 TI USB 어댑터를 경유, 직렬 버스를 통해 장치와 통신합니다.
드라이버 또는 라이브러리

PMBUSSW-LINUX — PMBUS용 Linux 드라이버

The Linux driver supports PMBus controlled Buck Controllers. The Linux driver supports communication through the PMBus and interfaces with the HWMon framework.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • tps40400
  • tps40422
  • tps544b20
  • tps544b25
  • (...)
시뮬레이션 모델

TPS40400 IBIS MODEL

SLVMAY8.ZIP (81 KB) - IBIS Model
시뮬레이션 모델

TPS40400 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM560A.ZIP (221 KB) - PSpice Model
계산 툴

SLUC263 Type III Compensation Calculation Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC & DC/DC controllers (external FET)
TPS40007 2.25V~5.5V, 300kHz, 동기 벅 컨트롤러, 소스/싱크, 프리바이어스 작동 TPS40009 2.25V~5.5V, 600kHz, 동기 벅 컨트롤러, 소스/싱크, 프리바이어스 작동 TPS40021 향상된 저입력(2.25V-5.5V), 최대 1MHz 주파수, 동기화 벅 컨트롤러, 소스/싱크 TPS40040 핀 수가 적은 2.25~5.5V 입력, 300kHz, 동기형 벅 컨트롤러 TPS40041 핀 수가 적은 2.25~5.5V 입력, 600kHz, 동기형 벅 컨트롤러 TPS40055 넓은 입력(8V-40V) 최대 1MHz 주파수 동기 벅 컨트롤러, 소스/싱크 TPS40057 넓은 입력(8V-40V) 최대 1MHz 주파수 동기 벅 컨트롤러, 프리바이어스가 있는 소스/싱크 TPS40075 전압 피드 포워드를 지원하는 4.5V~28V, 동기형 벅 컨트롤러 TPS40077 HTSSOP 패키지, 전압 피드 포워드를 지원하는 4.5V~28V, 동기형 벅 컨트롤러 TPS40101 고급 시퀀싱 및 출력 마지닝을 지원하는 4.5V~18V, 동기형 벅 컨트롤러 TPS40170 4.5V~60V의 넓은 입력 동기 PWM 벅 컨트롤러 TPS40190 4.5V~15V, 20A 동기형 벅 컨트롤러 TPS40192 전원 양호를 지원하는 4.5V~18V, 20A, 600kHz 동기형 벅 컨트롤러 TPS40193 전원 양호를 지원하는 4.5V~18V, 20A, 300kHz 동기형 벅 컨트롤러 TPS40195 전력 양호 및 동기화를 지원하는 4.5V~20V, 20A 동기형 벅 컨트롤러 TPS40200 넓은 입력의 비동기 벅 DC/DC 컨트롤러 TPS40303 FSS를 지원하는 3V~20V, 25A, 300kHz 동기형 벅 컨트롤러 TPS40304 FSS를 지원하는 3V~20V, 25A, 600kHz 동기형 벅 컨트롤러 TPS40305 FSS를 지원하는 3V~20V, 25A, 1.2MHz 동기형 벅 컨트롤러 TPS40322 듀얼 출력 또는 2상 동기형 벅 컨트롤러 TPS40400 원격 측정을 포함하여 PMBus™를 지원하는 3V~20V, 30A 동기형 벅 컨트롤러 TPS40422 듀얼 출력 또는 다상 동기 벅 컨트롤러(PMBus 지원) TPS5130 LDO 컨트롤러를 지원하는 4.5V~28V, 트리플 동기 벅 컨트롤러
AC/DC & DC/DC converters (integrated FET)
TPS53311 Eco-Mode 및 부드러운 PWM을 지원하는 2.9V~6V 입력, 3A 동기형 스텝다운 컨버터 TPS53313 저부하 효율성에 최적화된 4.5V~16V, 6A 동기형 벅 컨버터 TPS53316 통합 스위처를 지원하는 고효율, 5A 스텝다운 레귤레이터 TPS56121 4.5V~14V, 15A 동기형 SWIFT™ 벅 컨버터 TPS56221 4.5V~14V, 25A 동기형 SWIFT™ 벅 컨버터
레퍼런스 디자인

PMP11140 — TPS40400 4A에서 1.8V를 제공하는 PMBus를 지원하는 스텝다운 레귤레이터 레퍼런스 디자인

PMP11140 is a single-phase switching regulator accepting an input range of 4.5V to 13.2V and providing an output voltage of 1.8V capable of supplying 4A of current. This reference design shows 1.8Vout, 4A (3A without a fan) for CPU I/O and other applications in a 22cm by 12.6cm single sided (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP21440 — 비교: 0.8V/8W GaN 대 실리콘 전원 공급 장치 레퍼런스 설계

This reference design provides customers with a comparison study on the usage of GaN vs SI in power supply designs. This specific design uses TPS40400 controller to drive CSD87381 for the silicon power supply and LMG1210 with EPC2111 for the GaN power supply to provide 0.8V/10A. This design (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP20084 — 0.9V/10A PMBus POL 전원 레퍼런스 디자인

This reference design is a 3.3Vin to 0.9V @ 10A power supply in a small form-factor, cost-effective design. It uses the TPS40400 controller in conjunction with the CSD87381P (a high and low side FET IC). The TPS40400 features full PMBUS telemetry for enhanced monitoring and control. The (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP20080 — 12VDC 입력, 하이브리드 메모리 큐브(HMC) 일반 2 전원 공급 장치 레퍼런스 디자인

The PMP20080 is a powerful design intended to operate 5 output rails with application to a Hybrid Memory Cube (HMC) Gen2. This design uses 5 synchronous bucks with multiple different controllers to allow for a well regulated set of outputs. Also, PMP20080 allows for the configurability that comes (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP10520 — Xilinx Virtex® UltraScale™ FPGA 멀티 기가비트 트랜시버(MGT) 전원 솔루션

The PMP10520 reference design provides all the power supply rails (1V/20A, 1.2V/30A, 1.8V/4A) necessary to power the multi-gigabit transcievers (MGT) in Xilinx's Virtex® Ultrascale™  FPGAs.  This design uses a 5V input and has a PMBus interface for current and voltage (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP9475 — PMBus 지원 Xilinx Virtex UltraScale FPGA 전원 솔루션 레퍼런스 디자인

The PMP9475 12V-input reference design provides all the power supply rails necessary to power Xilinx's Virtex® UltraScale™ family of FPGAs in  a compact, highly efficient design.  This design uses several of TI's PMBus Point-Of-Load voltage regulators for ease of (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP9408 — PMBus 지원 Xilinx Virtex Ultrascale FPGA MGT(멀티 기가비트 트랜시버) 전원 레퍼런스 디자인

The PMP9408 reference design provides all the power supply rails necessary to power the multi-gigabit transcievers (MGT) in Xilinx's Virtex® Ultrascale™ FPGAs.  It utilizes a PMBus interface for current and voltage monitoring and meets Xilinx's low output voltage ripple (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP9407 — PMBus 지원 Xilinx Virtex Ultrascale FPGA MGT(멀티 기가비트 트랜시버) 전원 레퍼런스 디자인

The PMP9407 reference design provides all the power supply rails necessary to power the multi-gigabit transcievers (MGT) in Xilinx's Virtex® Ultrascale™ FPGAs.  This design uses a 5V input and has a PMBus interface for current and voltage monitoring, margining, timing delays, and (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP9463 — PMBus 지원 Xilinx Ultrascale Kintex FPGA 멀티 기가비트 트랜시버(MGT)용 전원 레퍼런스 디자인

The PMP9463 reference design provides all the power supply rails necessary to power the multi-gigabit transcievers (MGT) in Xilinx's Ultrascale™ Kintex® FPGAs.  It utilizes a PMBus interface for current and voltage monitoring and meets Xilinx's low output voltage ripple (...)
Test report: PDF
회로도: PDF
패키지 다운로드
VQFN (RHL) 24 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상