TPS562202
- 2-A converter with integrated 140-mΩ and 84-mΩ FETs
- D-CAP2™ mode control with fast transient response
- Input voltage range: 4.3 V to 17 V
- Output voltage range: 0.804 V to 7 V
- ECO mode at light loading
- 580-kHz switching frequency
- Low shutdown current of less than 3 µA
- 2% feedback voltage accuracy (25°C)
- Support pre-bias start-up
- Cycle-by-cycle overcurrent limit
- Hiccup-mode overcurrent protection
- Non-latch UVP and TSD protections
- Fixed soft start: 1.2 ms
The TPS562202 is a simple, easy-to-use, 2-A synchronous buck converter in a SOT563 package.
The device is optimized to operate with minimum external components and also optimized to achieve low standby current.
This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.
The TPS562202 operates in ECO mode, which maintains high efficiency during light load operation. The TPS562202 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS562202 4.3-V to 17-V Input, 2-A Synchronous Buck Converter in SOT563 datasheet | PDF | HTML | 2020. 9. 18 | |
| 애플리케이션 노트 | How to Co-Layout Three Common SOT-563 Package Pinouts (Rev. B) | PDF | HTML | 2024. 8. 27 | ||
| 애플리케이션 노트 | How to Understand LC Table and Select LC About TPS563202 | PDF | HTML | 2021. 5. 17 | ||
| 인증서 | TPS562202EVM EU Declaration of Conformity (DoC) | 2020. 5. 14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS562202EVM — 4.5V~17V, 2A 동기 스텝다운 컨버터 평가 모듈
TIDA-010231 — 광발전 애플리케이션 아크 감지용 아날로그 프런트 엔드 레퍼런스 설계
이 레퍼런스 설계는 광발전 시스템의 DC 아크 감지를 위한 4채널 아날로그 프런트 엔드를 구현합니다. 아크는 태양 전지판과 인버터 사이의 DC 전류에 존재하는 AC 잡음을 분석하여 감지합니다. 신호는 아날로그 필터 단계에 의해 조절되는 전류 변압기로 수집되고, C2000 실시간 MCU(마이크로컨트롤러)로 주파수 분석이 완료되기 전에 16비트 ADC ADC8363이 샘플링합니다. 이 설계는 여러 C2000 controlCARD와 호환되기 때문에 MCU를 시스템에 맞춰 조정할 수 있습니다. C2000™ MCU의 내부 ADC는 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.