전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

TPS62801

활성

1.75V~5.5V 입력, 1A 초저 IQ 강압 컨버터(0.7mm x 1.05mm 칩 스케일 패키지)

제품 상세 정보

이 정보를 표시할 수 없습니다. 제품 데이터 시트를 참조하십시오.
DSBGA (YKA) 6 0.735 mm² 1.05 x 0.7
  • 1.75V to 5.5V input voltage range
  • 2.3µA operating quiescent current
  • Up to 4MHz switching frequency
  • 0.6A or 1A output current
  • 1% output voltage accuracy
  • Selectable power save and forced PWM mode
  • R2D converter for flexible VOUT setting
  • 16 selectable and one fixed output voltages
    • TPS62800 (4MHz): 0.4V to 0.775V
    • TPS62801 (4MHz): 0.8V to 1.55V
    • TPS62802 (4MHz): 1.8V to 3.3V
    • TPS62806 (1.5MHz): 0.4V to 0.775V
    • TPS62807 (1.5MHz): 0.8V to 1.55V
    • TPS62808 (1.5MHz): 1.8V to 3.3V
  • Smart enable pin
  • Optimized pinout to support 0201 components
  • DCS-Control topology
  • Output discharge
  • 100% duty cycle operation
  • Tiny 6-pin, 0.35mm pitch WCSP package
  • Supports < 0.6mm design height
  • Supports < 5mm2 design size
  • Create a custom design using the:
  • 1.75V to 5.5V input voltage range
  • 2.3µA operating quiescent current
  • Up to 4MHz switching frequency
  • 0.6A or 1A output current
  • 1% output voltage accuracy
  • Selectable power save and forced PWM mode
  • R2D converter for flexible VOUT setting
  • 16 selectable and one fixed output voltages
    • TPS62800 (4MHz): 0.4V to 0.775V
    • TPS62801 (4MHz): 0.8V to 1.55V
    • TPS62802 (4MHz): 1.8V to 3.3V
    • TPS62806 (1.5MHz): 0.4V to 0.775V
    • TPS62807 (1.5MHz): 0.8V to 1.55V
    • TPS62808 (1.5MHz): 1.8V to 3.3V
  • Smart enable pin
  • Optimized pinout to support 0201 components
  • DCS-Control topology
  • Output discharge
  • 100% duty cycle operation
  • Tiny 6-pin, 0.35mm pitch WCSP package
  • Supports < 0.6mm design height
  • Supports < 5mm2 design size
  • Create a custom design using the:

The TPS6280x device family is a step-down converter with 2.3µA typical quiescent current featuring the highest efficiency and smallest design size. TI’s DCS-Control topology enables the device to operate with tiny inductors and capacitors with a switching frequency up to 4MHz. At light load conditions, the device seamlessly enters power save mode to reduce switching cycles and maintain high efficiency.

Connecting the VSEL/MODE pin to GND selects a fixed output voltage. With only one external resistor connected to VSEL/MODE pin, 16 internally set output voltages can be selected. An integrated R2D (resistor-to-digital) converter reads out the external resistor and sets the output voltage. The same device part number can be used for different applications and voltage rails just by changing a single resistor. Furthermore, the internally set output voltage provides better accuracy compared to a traditional external resistor divider network. After the device has started up, the DC/DC converter enters forced PWM mode by applying a high level at the VSEL/MODE pin. In this operating mode, the device runs at a typical 4MHz or 1.5MHz switching frequency, enabling lowest output voltage ripple and highest efficiency. The TPS6280x device series comes in a tiny 6-pin WCSP package with 0.35mm pitch.

The TPS6280x device family is a step-down converter with 2.3µA typical quiescent current featuring the highest efficiency and smallest design size. TI’s DCS-Control topology enables the device to operate with tiny inductors and capacitors with a switching frequency up to 4MHz. At light load conditions, the device seamlessly enters power save mode to reduce switching cycles and maintain high efficiency.

Connecting the VSEL/MODE pin to GND selects a fixed output voltage. With only one external resistor connected to VSEL/MODE pin, 16 internally set output voltages can be selected. An integrated R2D (resistor-to-digital) converter reads out the external resistor and sets the output voltage. The same device part number can be used for different applications and voltage rails just by changing a single resistor. Furthermore, the internally set output voltage provides better accuracy compared to a traditional external resistor divider network. After the device has started up, the DC/DC converter enters forced PWM mode by applying a high level at the VSEL/MODE pin. In this operating mode, the device runs at a typical 4MHz or 1.5MHz switching frequency, enabling lowest output voltage ripple and highest efficiency. The TPS6280x device series comes in a tiny 6-pin WCSP package with 0.35mm pitch.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS62800 활성 1.75V~5.5V 입력, 1A 초저 IQ 강압 컨버터(0.7mm x 1.05mm 칩 스케일 패키지) Pin-compatible converter with different output voltage range (0.4V - 0.775V).
TPS62802 활성 1.75V~5.5V 입력, 1A 초저 IQ 강압 컨버터(0.7mm x 1.05mm 칩 스케일 패키지) Pin-compatible converter with different output voltage range (1.8V - 3.3V).
TPS62807 활성 1.75V~5.5V 입력, 600mA 초저 IQ 강압 컨버터(0.7mm x 1.05mm WCSP 패키지) Pin-compatible converter with lower output current (0.6 A) and switching frequency (1.5 MHz).
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62861 활성 I2C/VSEL 인터페이스를 지원하는 1.75V~5.5V 입력, 1A 초저 IQ 강압 컨버터 Converter with I2C feature and 0.4-V to 1.98-V output voltage range.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
19개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TPS6280x 1.75V to 5.5V, 0.6A/1A, 2.3µA IQ Step-Down Converter 6-Pin, 0.35mm Pitch WCSP Package datasheet (Rev. G) PDF | HTML 2024/06/06
Application note Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 2022/11/17
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/05/23
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 2021/03/22
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22
Technical article Design a 3A power supply smaller than a 1608-size resistor PDF | HTML 2018/01/16
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015/08/17
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015/01/29
Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 2014/01/22
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/07/25
Application note How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/08/09
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62800EVM-892 — 2.3uA IQ 평가 모듈(3개 회로)을 지원하는 초소형 0.35mm 피치 1A 스텝다운 컨버터

TPS62800EVM-892 평가 모듈(EVM)은 0.35mm 피치의 초소형 1.05mm x 0.7mm WCSP 패키지에서 2.3µA IQ를 지원하는 1A, 스텝다운 컨버터의 TPS62800-1-2 제품군의 평가를 용이하게 합니다. 이 EVM에는 1.8V와 5.5V 사이의 입력 전압에서 0.4V와 3.3V 사이의 출력 전압을 생성하는 세 개의 개별 회로가 있습니다. 가장 작은 회로는 최대 높이가 0.65mm로 5.7mm²를 차지합니다. TPS62800-1-2는 웨어러블 및 스마트폰과 같은 공간이 제약된 애플리케이션을 위한 (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

TPS62801 PSpice Unencrypted Transient Model (Rev. B)

SLVMCJ4B.ZIP (83 KB) - PSpice Model
거버(Gerber) 파일

PWR892 Gerber

SLVC721.ZIP (376 KB)
레퍼런스 디자인

TIDA-010083 — 머신 비전 카메라 및 비전 센서를 위한 고밀도 절연 PoE 및 GigE 레퍼런스 설계

PoE(Power over Ethernet)는 데이터 전송률이 높은 롱 리치 케이블 하나에 전력과 데이터를 결합하여 쉽고 안정적인 솔루션을 제공합니다. 이러한 조합을 이용하면 PoE를 머신 비전 카메라, 비전 센서와 같은 소형 디바이스 용도로 적합하게 사용할 수 있습니다. 이 레퍼런스 설계에서는 1Gb/s의 물리적 계층 및 고효율 절연 전원 솔루션을 비롯한 완전한 PoE 전동 장치(PD)를 27 x 27mm의 매우 작은 폼 팩터로 구현합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01566 — 웨어러블 및 IoT를 위한 조명 부하 효율성, 저잡음 전원 공급 장치 레퍼런스 설계

이 레퍼런스 설계는 웨어러블, 스마트 워치, 스마트폰, 헤드셋, 헤드폰, 이어버드 및 카메라 모듈과 같은 휴대용 개인 전자 기기의 효율적인 저잡음 레일을 위한 초소형 전원 공급 장치 솔루션(총 8.5mm2)을 보여줍니다. LDO(저손실) 선형 레귤레이터는 DC/DC 컨버터를 따라 DC/DC 컨버터의 높은 효율로 LDO의 저잡음 성능을 제공합니다. 단 8µA의 전체 무부하 입력 전류(스위칭 IQ라고도 함)는 LDO 전용 기반 설계보다 높은 효율을 유지하며, 100µV에 가까운 출력 잡음은 DC/DC 전용 설계보다 민감한 부하에 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YKA) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상