TPS62932
- Configured for a wide range of applications
- 3.8-V to 30-V input voltage range
- 0.8-V to 22-V output voltage range
- Ultra-low quiescent current: 12 µA (TPS62932, TPS62933, and TPS62933P)
- Integrated 76-mΩ and 32-mΩ MOSFETs
- 0.8 V ± 1% reference voltage (25°C)
- Maximum 98% duty cycle operation
- Precision EN threshold
- 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current
- –40°C to 150°C operating junction temperature
- Numerous pin-compatible options
- TPS62932, TPS62933, and TPS62933F with the SS pin for adjustable soft-start time
- TPS62933P and TPS62933O with the PG pin for a power-good indicator
- TPS62932, TPS62933, and TPS62933P with pulse frequency modulation (PFM) for high light-load efficiency
- TPS62933F with forced continuous current modulation (FCCM)
- TPS62933O with out-of-audio (OOA) feature
- Ease of use and small solution size
- Peak current control mode with internal compensation
- 200-kHz to 2.2-MHz selectable frequency
- EMI friendly with frequency spread spectrum (TPS62932, TPS62933, TPS62933P and TPS62933O)
- Supports start-up with prebiased output
- Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
- Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
- 1.6-mm × 2.1-mm SOT583 package
- Create a custom design with the TPS6293x using the WEBENCH Power Designer
The TPS6293x is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 30 V, and supports up to 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current and 0.8-V to 22-V output voltage.
The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components.
The TPS62932, TPS62933, and TPS62933P operate in pulse frequency modulation for high light load efficiency. The TPS62933F operates in forced continuous current modulation which maintains lower output ripple during all load conditions. The TPS62933O operates in out of audio mode to avoid audible noise.
The ULQ (ultra-low quiescent) feature is beneficial for long battery lifetime. The switching frequency can be set by the configuration of the RT pin in the range of 200 kHz to 2.2 MHz, which can optimize system efficiency, solution size, and bandwidth. The soft-start time of the TPS62932, TPS62933, and TPS62933F can be adjusted by the external capacitor at the SS pin. The TPS62932, TPS62933, TPS62933P and TPS62933O are featured with frequency spread spectrum, which helps with lowering down EMI noise.
The TPS6293x is in a small SOT583 (1.6 mm × 2.1 mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS6293x 3.8-V to 30-V, 2-A, 3-A Synchronous Buck Converters in a SOT583 Package datasheet (Rev. D) | PDF | HTML | 2022/08/08 |
| EVM User's guide | TPS62932 2-A Converter Evaulation Module User's Guide | PDF | HTML | 2022/08/09 | |
| Certificate | TPS62932EVM EU RoHS Declaration of Conformity (DoC) | 2022/03/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62932EVM — 2A 동기식 벅 컨버터용 TPS62932 평가 모듈
TPS62932 는 3.8V~30V의 넓은 입력 전압 범위를 갖춘 고효율, 사용이 편리한 동기 벅 컨버터입니다 5V, 12V, 19V 및 24V 전원 버스 레일에서 전원을 공급하는 시스템에 이상적입니다. 이 EVM은 최대 2A 연속 출력 전류, 0.8V~22V 출력 전압 및 최대 98% 듀티 사이클 작동을 지원합니다. 이 기기는 빠른 과도 응답과 우수한 라인 및 부하 조정을 위해 고정 주파수 피크 전류 제어 모드를 사용합니다. 최적화된 내부 루프 보상으로 넓은 범위의 출력 전압과 작동 주파수에 걸쳐 외부 보상 구성 요소의 필요성을 (...)
TPS62933EVM — 3.8V~30V, 3A, 200kHz~2.2MHz 동기 벅 컨버터 TPS62933 평가 모듈
TIDA-010950 — 전원 조정 및 홀 효과 위치 감지를 지원하는 댐퍼 및 EEV 컨트롤러 레퍼런스 설계
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| SOT-5X3 (DRL) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치