TPS65023
- 1.7-A, 90% Efficient Step-Down Converter for Processor Core (VDCDC1)
- 1.2-A, Up to 95% Efficient Step-Down Converter for System Voltage (VDCDC2)
- 1.0-A, 92% Efficient Step-Down Converter for Memory Voltage (VDCDC3)
- 30-mA LDO and Switch for Real Time Clock (VRTC)
- 2 × 200-mA General-Purpose LDO
- Dynamic Voltage Management for Processor Core
- Preselectable LDO Voltage Using Two Digital Input Pins
- Externally Adjustable Reset Delay Time
- Battery Backup Functionality
- Separate Enable Pins for Inductive Converters
- I2C-Compatible Serial Interface
- I2C™ Setup and Hold Timing:
- TPS65023: 300 ns
- TPS65023B: 100 ns
- 85-µA Quiescent Current
- Low Ripple PFM Mode
- Thermal Shutdown Protection
- 40-Pin, 5-mm × 5-mm WQFN Package
The TPS65023x device is an integrated power management IC for applications powered by one
Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS65023x provides three
highly efficient, step-down converters targeted at providing the core voltage, peripheral, I/O, and
memory rails in a processor-based system. The core converter allows for on-the-fly voltage changes
through serial interface, allowing the system to implement dynamic power savings. All three
step-down converters enter a low-power mode at light load for maximum efficiency across the widest
possible range of load currents.
The TPS65023x also integrates two general-purpose 200-mA LDO voltage regulators, which are enabled with an external input pin. Each LDO operates with an input voltage range from 1.5 V to 6.5 V, thus allowing them to be supplied from one of the step-down converters or directly from the battery. The default output voltage of the LDOs can be digitally set to 4 different voltage combinations using the DEFLDO1 and DEFLDO2 pins. The serial interface can be used for dynamic voltage scaling, masking interrupts, or for disabling or enabling and setting the LDO output voltages. The interface is compatible with both the fast and standard mode I2C specifications, allowing transfers at up to 400 kHz. The TPS65023x is available in a 40-pin WQFN package, and operates over a free-air temperature of –40°C to 85°C.
기술 자료
설계 및 개발
전원 공급 솔루션
TPS65023을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
TPS65023EVM-205 — TPS65023 평가 모듈
The TPS65023EVM-205 is an evaluation tool for the TPS65023 multi-output Power Management IC. The TP65023 comes in 5x5 mm 40 pin QFN package and is suitable for applications that are powered with one Li-Ion or Li-Polymer battery cell and require multiple power rails. It features three (...)
IPG-UI — IPG-UI EVM GUI (Windows Installer)
IPG-UI GUI를 사용하여 여러 PMIC 디바이스를 구성하여 이러한 디바이스의 기능과 성능을 평가할 수 있습니다. 이 GUI는 웹 기반 기술을 사용하여 제작되었으며 USB2ANY 어댑터 보드를 사용하여 EVM 하드웨어와의 상호 작용을 지원합니다. USB2ANY 탐색기는 USB2ANY 어댑터 보드의 펌웨어를 필요한 버전(2.7.0.0 이상)으로 업데이트할 수 있도록 제공됩니다.
SLVC111 — TPS65023 Control Software Setup File – Legacy
TIDA-00604 — TPS65023을 사용하는 Altera Cyclone III FPGA 전원 레퍼런스 디자인
이 TPS65023 기반 레퍼런스 디자인은 Altera® Cyclone® III SoC(Cyclone® 시리즈 제품군)를 위한 소형 통합 전원 솔루션입니다. 이 설계는 Cyclone® III SoC에 전원을 공급하는 데 필요한 레일에 전원을 공급하는 데 사용되는 올인원 IC로 TPS65023을 보여줍니다. TPS65023은 간단하고 유연한 출력 전압 및 시퀀싱을 제공합니다. DC/DC 컨버터의 전압은 소프트웨어를 통해 또는 외부 저항 디바이더를 통해 설정할 수 있습니다. 이 전원 관리 IC는 (...)
TIDA-00605 — TPS65023을 사용하는 Altera Cyclone IV FPGA 전원 레퍼런스 디자인
이 TPS65023 기반 레퍼런스 디자인은 Altera® Cyclone® IV SoC(Cyclone® 시리즈 제품군)를 위한 소형 통합 전원 솔루션입니다. 이 설계는 Cyclone® IV SoC에 전원을 공급하는 데 필요한 레일에 전원을 공급하는 데 사용되는 올인원 IC로 TPS65023을 보여줍니다. TPS65023은 간단하고 유연한 출력 전압 및 시퀀싱을 제공합니다. DC/DC 컨버터의 전압은 소프트웨어를 통해 또는 외부 저항 디바이더를 통해 설정할 수 있습니다. 이 전원 관리 IC는 (...)
TIDA-01480 — Xilinx Zynq® UltraScale+™ ZU2CG−ZU5EV MPSoCs용 통합 전원 공급 장치 레퍼런스 설계
TIDA-01480 레퍼런스 설계는 MPSoC 장치의 Xilinx Zynq UltraScale+(ZU+) 제품군에 전원을 공급하기 위해 설계된 확장 가능한 전원 공급 장치입니다. 이 설계는 표준 DC 전원 공급 장치에서 전원을 공급받으며, 잘 정의된 Samtec 소켓 단자 스트립 연결을 통해 Xilinx 칩셋 및 DDR 메모리의 모든 레일에 전원을 공급합니다.
이 설계는 듀얼 코어 ARM® Cortex™-A53 애플리케이션 프로세서와 듀얼 코어 ARM® Cortex™-R5 실시간 프로세서를 사용하여 가장 기본적인 ZU2CG 장치를 (...)
TIDA-01589 — 잡음 감소 및 음향 반향 제거를 지원하는 하이파이, 근거리 양방향 오디오 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RSB) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.