전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS7A43

활성

50mA, 85V, 초저 IQ, 듀얼 저손실 전압 레귤레이터, 전원 양호 및 정밀도 활성화

제품 상세 정보

Output options Adjustable Output, Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 85 Vin (min) (V) 4 Vout (max) (V) 14.5 Vout (min) (V) 1.24 Fixed output options (V) 3.3, 5 Noise (µVrms) 115 Iq (typ) (mA) 0.0055 Thermal resistance θJA (°C/W) 53.7 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 2 Features Enable, Power good Accuracy (%) 1 PSRR at 100 KHz (dB) 75 Dropout voltage (Vdo) (typ) (mV) 600 Operating temperature range (°C) -40 to 125
Output options Adjustable Output, Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 85 Vin (min) (V) 4 Vout (max) (V) 14.5 Vout (min) (V) 1.24 Fixed output options (V) 3.3, 5 Noise (µVrms) 115 Iq (typ) (mA) 0.0055 Thermal resistance θJA (°C/W) 53.7 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 2 Features Enable, Power good Accuracy (%) 1 PSRR at 100 KHz (dB) 75 Dropout voltage (Vdo) (typ) (mV) 600 Operating temperature range (°C) -40 to 125
HVSSOP (DGQ) 10 14.7 mm² 3 x 4.9
  • Input voltage: 4 V to 85 V
  • Wide output (OUT) voltage range:
    • Adjustable: 1.24 V to 14.5 V
    • Fixed: 1.25 V to 5.0 V
  • Selectable intermediate output (MID_OUT):
    • 10 V, 12 V, 15 V
  • Maximum output current:
    • 50 mA (shared between OUT and MID_OUT)
  • 1% accuracy over temperature
  • Ultra-low IQ: 5.5 µA
  • Precision enable
  • Power-good (PG) output (open drain)
  • Thermal shutdown and overcurrent protection
  • Operating junction temperature: –40°C to +125°C
  • Package: HVSSOP-10 (RθJA = 53.7°C/W)
  • Input voltage: 4 V to 85 V
  • Wide output (OUT) voltage range:
    • Adjustable: 1.24 V to 14.5 V
    • Fixed: 1.25 V to 5.0 V
  • Selectable intermediate output (MID_OUT):
    • 10 V, 12 V, 15 V
  • Maximum output current:
    • 50 mA (shared between OUT and MID_OUT)
  • 1% accuracy over temperature
  • Ultra-low IQ: 5.5 µA
  • Precision enable
  • Power-good (PG) output (open drain)
  • Thermal shutdown and overcurrent protection
  • Operating junction temperature: –40°C to +125°C
  • Package: HVSSOP-10 (RθJA = 53.7°C/W)

The TPS7A43 low-dropout (LDO) linear voltage regulator introduces a combination of a 4-V to 85-V input voltage range with very-low quiescent current.

This device can support a wide range of input voltages (for example, a 15-s battery and 24-V to 48-V line power) and withstand line transient voltages up to 85 V. These features help modern applications meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A43 output (OUT) is available in both fixed and adjustable output versions, which can regulate from 1.24 V to 14.5 V at 1% accuracy. The device also provides a second intermediate output (MID_OUT) that can be set to 10 V, 12 V, and 15 V using the MVSEL pins and can be used to bias gate drivers in place of a discrete regulator.

The TPS7A43 features a precision enable input that helps enable or disable the LDO at a fixed and accurate threshold voltage using a resistor divider from the input.

The power-good (PG) output is used to monitor the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

The TPS7A43 low-dropout (LDO) linear voltage regulator introduces a combination of a 4-V to 85-V input voltage range with very-low quiescent current.

This device can support a wide range of input voltages (for example, a 15-s battery and 24-V to 48-V line power) and withstand line transient voltages up to 85 V. These features help modern applications meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A43 output (OUT) is available in both fixed and adjustable output versions, which can regulate from 1.24 V to 14.5 V at 1% accuracy. The device also provides a second intermediate output (MID_OUT) that can be set to 10 V, 12 V, and 15 V using the MVSEL pins and can be used to bias gate drivers in place of a discrete regulator.

The TPS7A43 features a precision enable input that helps enable or disable the LDO at a fixed and accurate threshold voltage using a resistor divider from the input.

The power-good (PG) output is used to monitor the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS7A44 활성 50mA, 65V, 저 IQ, LDO 선형 전압 레귤레이터, 전원 양호 및 선택 가능한 중간 출력 레일 지원 Lower input voltage range.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM2936 활성 역전압 보호를 지원하는 50mA, 60V, 저 IQ, 저손실 전압 레귤레이터 Higher power-supply rejection ratio (PSRR), better accuracy and IQ
TPS7A16 활성 100mA, 60V, 초저 IQ, 저손실(LDO) 전압 레귤레이터, 전원 양호 및 활성화 Higher power-supply rejection ratio (PSRR), better accuracy and similar package.

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet TPS7A43 50-mA, 85-V, Ultra-Low IQ, Low-Dropout Linear Voltage Regulator With Power-Good, Precision Enable, and Selectable Mid-Output Rail datasheet (Rev. B) PDF | HTML 2022/11/15
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021/02/18
EVM User's guide TPS7A43EVM-047 EVM User's Guide 2020/10/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS7A43EVM-047 — TPS7A43 50mA, 85V, 초저 IQ, 듀얼 LDO 전압 레귤레이터, 전원 양호 평가 모듈

TPS7A43EVM-047 평가 모듈(EVM)은 TPS7A43 선형 레귤레이터의 작동 및 성능을 평가하기 위한 플랫폼입니다. 이 EVM 구성에는 일반 애플리케이션을 위한 단일 50mA, 고전압, 낮은 정동작 전류(IQ), 듀얼 출력, 저손실(LDO) 전압 레귤레이터가 포함되어 있습니다. 이 레귤레이터는 두 출력 간에 최대 50mA를 분할하여 전달할 수 있으며 최대 85V의 넓은 입력 전압(VIN) 범위를 제공합니다.

TPS7A43의 안정성을 위해 1µF(또는 그 이상) 출력 커패시터(COUT)를 사용하고 중간 출력에는 최소 3 × (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS7A43 PSpice Transient Model (3.3 V)

SBVM980.ZIP (51 KB) - PSpice Model
시뮬레이션 모델

TPS7A43 PSpice Transient Model (5 V)

SBVM979.ZIP (61 KB) - PSpice Model
시뮬레이션 모델

TPS7A43 PSpice Transient Model (Adjustable)

SBVM981.ZIP (52 KB) - PSpice Model
패키지 다운로드
HVSSOP (DGQ) 10 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상