TPSM82916
- Low output 1/f noise < 20µVRMS (100Hz to 100kHz)
- Low output voltage ripple < 10µVRMS after ferrite bead
- High PSRR of > 65dB (up to 100kHz)
- 2.2MHz, 1.4MHz, or 1.0MHz fixed frequency peak current mode control
- Synchronizable with external clock
- Integrated loop compensation supports ferrite bead for second stage L-C filter with 30dB attenuation
- Spread spectrum modulation
- 3.0V to 17V input voltage range
- 0.8V to 5.5V output voltage range
- 25mΩ/7mΩ RDSon
- Output voltage accuracy of ±1% over temperature
- Precise enable input allows
- User-defined undervoltage lockout
- Exact sequencing
- Adjustable soft start
- Power-good output
- Output discharge (optional)
- –40°C to 125°C junction temperature range
- 4.0mm × 4.7mm × 3.0mm QFN
- Create a custom design using the TPSM82916 with the WEBENCH Power Designer
The TPSM82916 is a high-efficiency, low noise, and low ripple current mode synchronous buck module. The device is designed for noise sensitive applications that normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, deserializer, and radar applications.
To reduce the output voltage ripple, the device loop compensation is designed to operate with an optional second-stage ferrite bead L-C filter. Low-frequency noise levels, similar to a low-noise LDO, are further achieved by filtering the internal voltage reference with a capacitor connected to the NR/SS pin. Combined, these features allow for an output voltage ripple below 10µVRMS.
The device operates at a fixed switching frequency of 2.2MHz, 1.4MHz, or 1MHz, and can be synchronized to an external clock. An optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPSM82916 3V to 17V, 6A, Low Noise and Low Ripple Buck Module With Integrated Ferrite Bead Filter Compensation datasheet (Rev. A) | PDF | HTML | 2025/06/19 |
| More literature | Low-Noise and Low-Ripple Techniques for a Supply Without an LDO (Rev. C) | PDF | HTML | 2025/02/19 | |
| Certificate | TPSM82916EVM EU Declaration of Conformity (DoC) | 2024/10/16 | ||
| Application brief | Solving Power Design Challenges in Semiconductor Test and ATE Applications (Rev. A) | PDF | HTML | 2024/08/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPSM82916EVM — TPSM82916 평가 모듈
TPSM82916 평가 모듈(EVM)(SR073)을 통해 TPSM82916 및 TPSM82914를 쉽게 평가할 수 있습니다. SR073은 6A TPSM82916을 사용하여 3V~17V 사이의 입력 전압에서 1.2V 출력 전압을 출력합니다. 극히 낮은 잡음으로 인해 TPSM82916은 잡음에 민감한 회로에서 LDO(저손실) 선형 레귤레이터를 대체하는 고효율 제품입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| QFN-FCMOD (VCE) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.