전력 관리 AC/DC 스위칭 레귤레이터 AC/DC controllers

UCC24610

활성

2차 측 동기형 정류기 컨트롤러

제품 상세 정보

Topology Active-clamp flyback, Active-clamp forward, Buck-Boost, CCM, DCM, Flyback, Forward, Half bridge, LLC, LLC half-bridge, Quasi resonant Control mode VDS sensing Features 600kHz operation, Automatic Light Load Management, Compatible with CCM, SYNC Pin for CCM, SYNC pin for CCM, Synchronous Rectifier, VDS Sensing
Topology Active-clamp flyback, Active-clamp forward, Buck-Boost, CCM, DCM, Flyback, Forward, Half bridge, LLC, LLC half-bridge, Quasi resonant Control mode VDS sensing Features 600kHz operation, Automatic Light Load Management, Compatible with CCM, SYNC Pin for CCM, SYNC pin for CCM, Synchronous Rectifier, VDS Sensing
SOIC (D) 8 29.4 mm² 4.9 x 6 VSON (DRB) 8 9 mm² 3 x 3
  • Secondary-Side Controller Optimized for 5-V Systems
  • Up to 600-kHz Operating Frequency
  • VDS MOSFET-Sensing
  • 1.6-Ω Sink, 2.0-Ω Source Gate-Drive Impedances
  • Micro-Power Sleep Current for 90+ Designs
  • Automatic Light-Load Management
  • Synchronous Wake-Up From Sleep and Light-Load Modes
  • Protection Features on Programming Inputs
  • SYNC Input for CCM Operation
  • 20-ns Typical Turnoff Propagation Delay
  • Improved Efficiency and Design Flexibility Over Traditional Diode Solution
  • May Be Biased Directly From 5-V Output
  • Minimal Component Count
  • APPLICATIONS
    • AC-to-DC 5-V Adapters
    • 5-V Bias Supplies
    • Low Voltage Rectification Circuits
    • Flyback and LLC Converters
  • Secondary-Side Controller Optimized for 5-V Systems
  • Up to 600-kHz Operating Frequency
  • VDS MOSFET-Sensing
  • 1.6-Ω Sink, 2.0-Ω Source Gate-Drive Impedances
  • Micro-Power Sleep Current for 90+ Designs
  • Automatic Light-Load Management
  • Synchronous Wake-Up From Sleep and Light-Load Modes
  • Protection Features on Programming Inputs
  • SYNC Input for CCM Operation
  • 20-ns Typical Turnoff Propagation Delay
  • Improved Efficiency and Design Flexibility Over Traditional Diode Solution
  • May Be Biased Directly From 5-V Output
  • Minimal Component Count
  • APPLICATIONS
    • AC-to-DC 5-V Adapters
    • 5-V Bias Supplies
    • Low Voltage Rectification Circuits
    • Flyback and LLC Converters
  • This GREEN Rectifier controller is a high-performance controller and driver for standard and logic-level N-channel MOSFET power devices used for low-voltage secondary-side synchronous rectification.

    The combination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also indirectly reduces primary-side losses as well, due to compounding of efficiency gains.

    Using drain-to-source voltage sensing, the UCC24610 is ideal for Flyback and LLC-resonant power supplies but can also be used with other power architectures. The UCC24610 is optimized for output voltages from 4.5 V to 5.5 V, and is suitable for use with lower and higher output voltages as well.

    The UCC24610 offers a programmable false-triggering filter, a programmable timer to automatically switch to light-load mode at light load, and a SYNC input for optional use in continuous conduction mode (CCM) systems. Protection features on TON and EN/TOFF pins prevent run-away on-time due to open-circuit or short-circuit fault conditions.

    This device is available in an 8-pin SOIC package and an 8-pin, 3.0-mm × 3.0-mm SON package with an exposed thermal pad.

    This GREEN Rectifier controller is a high-performance controller and driver for standard and logic-level N-channel MOSFET power devices used for low-voltage secondary-side synchronous rectification.

    The combination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also indirectly reduces primary-side losses as well, due to compounding of efficiency gains.

    Using drain-to-source voltage sensing, the UCC24610 is ideal for Flyback and LLC-resonant power supplies but can also be used with other power architectures. The UCC24610 is optimized for output voltages from 4.5 V to 5.5 V, and is suitable for use with lower and higher output voltages as well.

    The UCC24610 offers a programmable false-triggering filter, a programmable timer to automatically switch to light-load mode at light load, and a SYNC input for optional use in continuous conduction mode (CCM) systems. Protection features on TON and EN/TOFF pins prevent run-away on-time due to open-circuit or short-circuit fault conditions.

    This device is available in an 8-pin SOIC package and an 8-pin, 3.0-mm × 3.0-mm SON package with an exposed thermal pad.

    다운로드 스크립트와 함께 비디오 보기 비디오

    기술 자료

    star =TI에서 선정한 이 제품의 인기 문서
    검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
    8개 모두 보기
    상위 문서 유형 직함 형식 옵션 날짜
    * Data sheet UCC24610 GREEN Rectifier™ Controller Device datasheet (Rev. C) PDF | HTML 2015/08/12
    More literature PCB layout guidelines to optimize power supply performance 2021/03/23
    Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
    Application note UCC24610 and UCC24612 SR Range Extension Guide 2017/12/18
    Technical article USB Wall Chargers: Conveniences and Challenges PDF | HTML 2015/10/06
    Application note A High Efficiency Synchronous Rectifier Flyback for High Density AC/DC Adapter 2011/06/03
    User guide A 90-W High-Efficiency, LLC Series-Resonant Converter 2010/11/03
    User guide Using the UCC24610EVM-693 2010/09/03

    설계 및 개발

    추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

    평가 보드

    UCC24610EVM-563 — UCC24610 2차측 동기 정류기 컨트롤러용 평가 모듈

    UCC24610EVM-563은 UCC24610으로 제어되는 2차측 동기 정류를 지원하는 25W, 5V 오프라인 DCM 플라이백 컨버터입니다. 1차측 제어는 UCC28610 그린 모드 플라이백 컨트롤러에서 제공합니다.
    사용 설명서: PDF
    TI.com에서 구매할 수 없음
    도터 카드

    UCC24610EVM-693 — UCC24610 2차측 동기 정류기 컨트롤러용 다이오드 교체 데모 카드

    UCC24610EVM-693은 기존 고객 시스템에서 쇼트키 다이오드 대체용으로 사용되는 다이오드 교체 데모 카드입니다. 이 부속 카드는 UCC24610 컨트롤러, 5V, 10W 출력 컨버터에 적합한 FET 및 지원 부품으로 구성됩니다. UCC24610EVM-693은 기존 다이오드를 제거한 후 몇 개의 회선으로 고객 컨버터에 손쉽게 연결할 수 있습니다.
    사용 설명서: PDF
    TI.com에서 구매할 수 없음
    계산 툴

    SLUC348 UCC24610 Design Calculation Tool

    지원되는 제품 및 하드웨어

    지원되는 제품 및 하드웨어

    많은 TI 레퍼런스 설계에는 UCC24610이(가) 포함됩니다.

    레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.

    패키지 CAD 기호, 풋프린트 및 3D 모델
    SOIC (D) 8 Ultra Librarian
    VSON (DRB) 8 Ultra Librarian

    주문 및 품질

    포함된 정보:
    • RoHS
    • REACH
    • 디바이스 마킹
    • 납 마감/볼 재질
    • MSL 등급/피크 리플로우
    • MTBF/FIT 예측
    • 물질 성분
    • 인증 요약
    • 지속적인 신뢰성 모니터링
    포함된 정보:
    • 팹 위치
    • 조립 위치

    권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

    지원 및 교육

    TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

    콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

    품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

    동영상