UCC2897A
- Low-output jitter
- Soft-stop shutdown of MAIN and AUX
- 110-V input startup function
- Ideal for active-clamp, reset-forward, flyback and synchronous rectifier uses
- Provides complementary auxiliary driver with programmable dead time (Turn-On Delay) between AUX and MAIN switches
- Peak current-mode control with 0.5-V cycle-by-cycle current limiting
- TrueDrive™ 2-A Sink, 2-A source outputs
- Trimmed internal-bandgap reference for accurate line UV and line OV threshold
- Programmable slope compensation
- High-performance 1-MHz synchronizable oscillator with internal timing capacitor
- Precise programmable maximum duty cycle
- PB-free lead finish package
The UCC2897A PWM controller simplifies implementation of the various active clamp or reset and synchronous rectifier switching power topologies.
The UCC2897A is a peak current-mode fixed-frequency high-performance pulse-width modulator. The controller includes the logic and the drive capability for the P-channel auxiliary switch along with a simple method of programming the critical delays for proper active-clamp operation.
Features include an internal programmable slope compensation circuit, precise DMAX limit, and a synchronizable oscillator with an internal-timing capacitor. An accurate line-monitoring function also programs the ON and OFF transitions of the converter with regard to the bulk input voltage, VIN.
The UCC2897A adds a second-level hiccup-mode current-sense threshold, bi-directional synchronization and input-overvoltage protection functionalities. The UCC2897A is offered in 20-pin TSSOP (PW) and 20-pin QFN (RGP) packages.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | UCC2897A Advanced Current-Mode Active-Clamp PWM Controller datasheet (Rev. G) | PDF | HTML | 2019. 1. 27 | |
| 애플리케이션 노트 | Understanding and Designing an Active Clamp Current Mode Controlled Converter (Rev. A) | 2020. 1. 27 | |||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 애플리케이션 노트 | Slope Compensation Design for UCC2897A | 2017. 10. 30 | |||
| 기술 문서 | Flyback converters: two outputs are better than one | PDF | HTML | 2016. 11. 24 | ||
| 기술 문서 | Excuse me for being a little forward... with my topology | PDF | HTML | 2015. 10. 21 | ||
| 애플리케이션 노트 | UCC2897A Peak Current Mode Active Clamp Forward Converter Small Signal Modeling | 2014. 1. 17 | |||
| 애플리케이션 노트 | External Slope Compensation for UCC2897A in Some Special Applications | 2010. 1. 5 | |||
| 애플리케이션 노트 | Method of Providing Hiccup Operation for UCC2897AEVM | 2009. 8. 27 | |||
| 추가 자료 | Seminar 1100 Topic 3 - Design Considerations for Active Clamp and Reset | 2001. 2. 15 | |||
| 추가 자료 | Seminar 1000 Topic 3 - Active Clamp and Reset Technique | 2001. 2. 15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS2372-4EVM-006 — IEEE802.3bt PoE PD 애플리케이션을 위한 TPS2372-4EVM 평가 모듈
TPS2372 평가 모듈(TPS2372-4EVM-006)에는 LED 조명 및 모듈과 같은 고전력 PoE PD 애플리케이션에 적합한 IEEE802.3bt PoE PD 컨트롤러인 TPS2372에 대한 평가 및 레퍼런스 회로가 포함되어 있습니다.
IEEE802.3bt 지원 PSE 컨트롤러가 필요하신가요? TPS23880을 확인해 보세요.
TPS2373-4EVM-758 — IEEE802.3bt PoE PD 애플리케이션을 위한 TPS2373-4 평가 모듈
TPS2373 평가 모듈(TPS2373-4EVM-758)에는 고전력 PoE PD 애플리케이션에 적합한 IEEE802.3bt PoE PD 컨트롤러인 TPS2373에 대한 평가 및 레퍼런스 회로가 포함되어 있습니다. 이 EVM은 고효율, 70W PD 솔루션을 위한 5V 능동 클램프 순방향 절연 컨버터를 사용하여 설계되었습니다.
IEEE802.3bt 지원 PSE 컨트롤러가 필요하신가요? TPS23880을 확인해 보세요.
UCC2897AEVM — UCC2897A 평가 모듈
UCC2897A 평가 모듈(EVM)은 48V 입력에서 작동하며 30A의 부하 전류에서 3.3V 조정 출력을 제공하는 능동 클램프 리셋 순방향 컨버터입니다. 이 설계는 전체 36V~72V의 전기 통신 입력 범위에서 작동하며, 제로 부하 전류까지 완전히 조정할 수 있습니다. 이 모듈은 UCC2897A 전류 모드 능동 클램프 PWM 컨트롤러를 사용하여 능동 클램프 변압기 리셋 기술을 효과적으로 시연합니다.
UCC2897A TINA-TI Startup Transient Reference Design
UCC2897A TINA-TI Steady State Transient Reference Design
SLUC662 — UCC2897A Design Calculator
많은 TI 레퍼런스 설계에는 UCC2897A이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 20 | Ultra Librarian |
| VQFN (RGP) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.