首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
BLDC 驅動器

DRV3203E-Q1

停產

適用汽車安全應用的 3 相馬達驅動器 IC

立即訂購
產品規格表

DRV3203E-Q1

停產
產品規格表 立即訂購

產品詳細資料

Rating Automotive Architecture Gate driver Operating temperature range (°C) to
Rating Automotive Architecture Gate driver Operating temperature range (°C) to
HTQFP (PHP) 48 81 mm² 9 x 9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 0: –40°C to 150°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C2
  • 3-Phase Pre-Drivers for N-Channel MOS Field-Effect Transistors (MOSFETs)
  • Pulse-Width Modulation (PWM) Frequency up to 20 kHz
  • Fault Diagnostics
  • Charge Pump
  • Phase Comparators
  • Microcontroller (MCU) Reset Generator
  • Serial Port I/F (SPI)
  • Motor-Current Sense
  • 3.3-V Regulator
  • Low-Current Sleep Mode
  • Operation VB Range From 5.3 to 26.5 V
  • 48-Pin PHP

All trademarks are the property of their respective owners.

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 0: –40°C to 150°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C2
  • 3-Phase Pre-Drivers for N-Channel MOS Field-Effect Transistors (MOSFETs)
  • Pulse-Width Modulation (PWM) Frequency up to 20 kHz
  • Fault Diagnostics
  • Charge Pump
  • Phase Comparators
  • Microcontroller (MCU) Reset Generator
  • Serial Port I/F (SPI)
  • Motor-Current Sense
  • 3.3-V Regulator
  • Low-Current Sleep Mode
  • Operation VB Range From 5.3 to 26.5 V
  • 48-Pin PHP

All trademarks are the property of their respective owners.

The DRV3203E-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For commutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and comparator in a battery common-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI.

The DRV3203E-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For commutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and comparator in a battery common-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI.
filter 尋找其它 BLDC 驅動器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet DRV3203E-Q1 Three-Phase Brushless Motor Driver datasheet (Rev. B) PDF | HTML 2016年 7月 13日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點