首頁 電源管理 AC/DC & DC/DC controllers (external FET)
首頁
電源管理
AC/DC & DC/DC controllers (external FET)

LM25148-Q1

現行

具有超低 IQ 的車用 42-V 同步降壓 DC/DC 控制器

立即訂購
產品規格表

LM25148-Q1

現行
產品規格表 立即訂購

產品詳細資料

Vin (min) (V) 3.5 Vin (max) (V) 42 Operating temperature range (°C) -40 to 150 Control mode current mode Rating Automotive Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (A) 0.0000095 Duty cycle (max) (%) 99
Vin (min) (V) 3.5 Vin (max) (V) 42 Operating temperature range (°C) -40 to 150 Control mode current mode Rating Automotive Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (A) 0.0000095 Duty cycle (max) (%) 99
VQFN (RGY) 24 19.25 mm² 5.5 x 3.5
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Integrated EMI mitigation
    • Selectable dual random spread spectrum (DRSS) feature for enhanced EMI performance across low and high-frequency bands
    • Optimized for CISPR 25 Class 5 requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 42 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable output from 0.8 V to 36 V
    • 150°C maximum junction temperature
    • Lossless DCR or shunt current sensing
    • Shutdown mode current of 2.3 µA
    • No-load sleep current of 9.5 µA
    • Internal soft-start ramp of 3 ms
    • Stackable up to two phases
    • Internal bootstrap diode
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
    • Selectable PFM or FPWM modes
  • Inherent protection features for robust design
    • Internal hiccup mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM25148-Q1 with WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Integrated EMI mitigation
    • Selectable dual random spread spectrum (DRSS) feature for enhanced EMI performance across low and high-frequency bands
    • Optimized for CISPR 25 Class 5 requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 42 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable output from 0.8 V to 36 V
    • 150°C maximum junction temperature
    • Lossless DCR or shunt current sensing
    • Shutdown mode current of 2.3 µA
    • No-load sleep current of 9.5 µA
    • Internal soft-start ramp of 3 ms
    • Stackable up to two phases
    • Internal bootstrap diode
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
    • Selectable PFM or FPWM modes
  • Inherent protection features for robust design
    • Internal hiccup mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM25148-Q1 with WEBENCH Power Designer

The LM25148-Q1 is a 42-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM25148-Q1 can be set up in idual-phase mode (paralleled output) with accurate current sharing for high-current applications. It can operate at input voltages as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM25148-Q1 has a unique EMI reduction feature known as dual random spread spectrum (DRSS). Combining low-frequency triangular and high-frequency random modulations mitigates EMI disturbances across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM25148-Q1 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM25148-Q1 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package with wettable flank pins to facilitate optical inspection during manufacturing.

The LM25148-Q1 is a 42-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM25148-Q1 can be set up in idual-phase mode (paralleled output) with accurate current sharing for high-current applications. It can operate at input voltages as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM25148-Q1 has a unique EMI reduction feature known as dual random spread spectrum (DRSS). Combining low-frequency triangular and high-frequency random modulations mitigates EMI disturbances across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM25148-Q1 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM25148-Q1 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package with wettable flank pins to facilitate optical inspection during manufacturing.
open-in-new 尋找其它 AC/DC & DC/DC controllers (external FET)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
LM25149 現行 具超低 IQ 和整合式主動 EMI 濾波器的 42-V 同步降壓 DC/DC 控制器 Pin-to-pin, non-automotive equivalent with active EMI filter (AEF)
LM25149-Q1 現行 具超低 IQ 和整合式主動 EMI 濾波器的 42-V 車用同步降壓 DC/DC 控制器 Pin-to-pin with active EMI filter (AEF)

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM25148-Q1 42-V, Automotive, Synchronous, Buck DC/DC Controller with Ultra-Low IQ and Dual Random Spread Spectrum datasheet (Rev. A) PDF | HTML 2023年 2月 13日
Test report Power Delivery Reference Design for AMD Versal™ AI Edge Series PDF | HTML 2024年 3月 25日
Application note How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023年 8月 16日
User guide LM25149-Q1 EVM User's Guide (Rev. A) PDF | HTML 2022年 4月 29日
Functional safety information LM25148-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 9月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM25149-Q1EVM-2100 — LM25149-Q1 5.5-V 至 36-V 低 IQ、同步降壓 DC/DC 控制器評估模組

LM25149-Q1EVM-2100 高密度評估模組 (EVM) 的設計目的在於展示 LM25149-Q1 高性能、車用同步降壓 DC/DC 降壓控制器。此評估模組可以在 5.5 V 至 36 V 的廣泛輸入電壓範圍內運作，可提供高於 1% 設定點準確度，及高達 8-A 輸出電流的固定 5-V 輸出。LM25149-Q1 提供先進 EMI 性能和超低 IQ。發生故障期間的穩壓器功能包括：電壓過低鎖定、內部緩啟動、Hiccup 模式過電流防護以及過熱自動關機。另外還提供開漏 PGOOD 指示器和 SYNC IN / SYNC OUT 模式功能。
使用指南: PDF | HTML
TI.com 無法提供
開發板

LM5149-Q1EVM-400 — 搭載主動式 EMI 濾波器的 72-V、低 IQ、同步降壓 DC/DC 控制器的 LM5149-Q1 評估模組

LM5149-Q1EVM-400 高密度評估模組 (EVM) 的設計目的在於展示 LM5149-Q1 高性能、車用同步降壓 DC/DC 降壓控制器。EVM 可在 15 V 至 72 V 的廣泛輸入電壓範圍內運作，可提供高於 1% 設定點準確度，及高達 8-A 輸出電流的固定 12-V 輸出。LM5149-Q1 提供先進的 EMI 性能、超低 IQ 保護功能，可在穩壓器故障狀況下提供防護，包括電壓過低鎖定、內部緩啟動、打嗝模式過電流保護，以及過熱自動關機。該設備還包括開漏 PGOOD 指示器和 SYNC IN 功能。

使用指南: PDF | HTML
TI.com 無法提供
計算工具

LM5148-LM25148DESIGN-CALC — LM5148 和 LM25148 控制器快速入門設計工具

Welcome to the quickstart design tool for the LM5148, LM5148-Q1, LM25148 and LM25148-Q1. This standalone tool facilitates and assists the power supply engineer with the design of a DC/DC buck regulator based on the above controller family. As such, the user can expeditiously arrive at an (...)
檢視選項
PCB 佈局

LM25149-Q1EVM-2100 PCB Layout Files

SNVR501.ZIP (1990 KB)
下載
參考設計

PMP23227 — 適用於 AMD Versal™ Edge AI 系列的電力傳輸參考設計

此參考設計展示了 VE2302 裝置所需的電源軌如何由 TI 的穩壓器 IC 供電。AMD 的最小供應器電源軌電力整合。請參見 AMD 的 Power Design Manager (PDM) 工具，以了解所有可用的電源整合選項。在預估任何應用的功率時，請使用 PDM。此參考設計使用範例功率估計。設計 AI Edge 系列其他裝置的電源樹狀架構時，也可使用此設計做為基礎。此系統的原始電源通常介於 8VIN 至 18VIN 之間，並可提供約 50W 的功率。
Test report: PDF
參考設計

PMP31252 — 適合車用的 150W 雙相同步降壓轉換器參考設計

本設計展示可當成雙輸出轉換器使用的低 EMI、雙相位降壓轉換器。作為雙相轉換器，此電路可提供 22A 的連續輸出電流和 30A 峰值電流，並具備 12V 至 5V 配置。
Test report: PDF
封裝 引腳 下載
VQFN (RGY) 24 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片