首頁 放大器 比較器
首頁
放大器
比較器
最新

LM2903L-Q1

預覽

具有汲極斷路輸出及自閂鎖的雙精密比較器

立即訂購
產品規格表

LM2903L-Q1

預覽
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.3 Vs (max) (V) 36 Vs (min) (V) 2.7 Rating Automotive Features Fail-safe, Latch Iq per channel (typ) (mA) 0.25 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In to V- Operating temperature range (°C) -40 to 125 Input bias current (±) (max) (nA) 50 VICR (max) (V) 34 VICR (min) (V) 0 TI functional safety category Functional Safety-Capable
Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.3 Vs (max) (V) 36 Vs (min) (V) 2.7 Rating Automotive Features Fail-safe, Latch Iq per channel (typ) (mA) 0.25 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In to V- Operating temperature range (°C) -40 to 125 Input bias current (±) (max) (nA) 50 VICR (max) (V) 34 VICR (min) (V) 0 TI functional safety category Functional Safety-Capable
X2QFN (RUG) 10 3 mm² 1.5 x 2
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Output Latches on High to Low Output Transition
  • Level-triggered clear
  • Transparent Mode
  • Independent latches per channel
  • 2.7V to 36V supply range
  • Offset Voltage: 2.5mV max at 25°C
  • Fault-tolerant inputs
  • 300ns typical propagation delay
  • Low quiescent current: 350µA per channel
  • Open-drain outputs
  • CLR input compatable down to 1.2V logic
  • Functional Safety-Capable
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Output Latches on High to Low Output Transition
  • Level-triggered clear
  • Transparent Mode
  • Independent latches per channel
  • 2.7V to 36V supply range
  • Offset Voltage: 2.5mV max at 25°C
  • Fault-tolerant inputs
  • 300ns typical propagation delay
  • Low quiescent current: 350µA per channel
  • Open-drain outputs
  • CLR input compatable down to 1.2V logic
  • Functional Safety-Capable

The TL331L-Q1 (single) and LM2903L-Q1 (dual) are high voltage self-latching comparators with a open-collector output. The family also offers low input offset voltage and fault-tolerant inputs. These devices have an excellent speed-to-power combination with a propagation delay of 300ns with a quiescent supply current of only 300µA per channel.

The unique feature of the family is the output latching capability. The output latches upon the first high-to-low threshold crossing, allowing capture of an event or error condition without the full attention of a system controller. This allows events to be captured at start up while the system controller is still initializing or busy with other tasks. When the Latch input is held low, the "Transparent" mode is entered and the output continues to reflect the input conditions (latching disabled).

These comparators also feature fault-tolerant inputs that can go up to 36V without damage with no output phase inversion. This makes this family of comparators designed for precision voltage monitoring in harsh, noisy environments.

The open-drain outputs can be pulled-up below or beyond the supply voltage for OR’ing multiple outputs or level translation.

The family is specified for the Automotive temperature range of -40°C to +125°C and are available in standard leaded and leadless packages.

The TL331L-Q1 (single) and LM2903L-Q1 (dual) are high voltage self-latching comparators with a open-collector output. The family also offers low input offset voltage and fault-tolerant inputs. These devices have an excellent speed-to-power combination with a propagation delay of 300ns with a quiescent supply current of only 300µA per channel.

The unique feature of the family is the output latching capability. The output latches upon the first high-to-low threshold crossing, allowing capture of an event or error condition without the full attention of a system controller. This allows events to be captured at start up while the system controller is still initializing or busy with other tasks. When the Latch input is held low, the "Transparent" mode is entered and the output continues to reflect the input conditions (latching disabled).

These comparators also feature fault-tolerant inputs that can go up to 36V without damage with no output phase inversion. This makes this family of comparators designed for precision voltage monitoring in harsh, noisy environments.

The open-drain outputs can be pulled-up below or beyond the supply voltage for OR’ing multiple outputs or level translation.

The family is specified for the Automotive temperature range of -40°C to +125°C and are available in standard leaded and leadless packages.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet TL331L-Q1 and LM2903L-Q1 Automotive Open-Drain High Voltage Self-Latching Comparators datasheet PDF | HTML 2026年 7月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

SMALL-AMP-DIP-EVM — 適用於採用小尺寸封裝之運算放大器的評估模組

SMALL-AMP-DIP-EVM 提供快速簡易方式，與許多業界標準小型封裝進行介接，因而加速小型封裝運算放大器原型設計。SMALL-AMP-DIP-EVM 支援八個小型封裝選項，包括 DPW-5 (X2SON)、DSG-8 (WSON)、DCN-8 (SOT)、DDF-8 (SOT)、RUG-10 (X2QFN)、RUC-14 (X2QFN)、RGY-14 (VQFN) 和 RTE-16 (WQFN)。

使用指南: PDF
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
X2QFN (RUG) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片