首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

LM4863

現行

具立體聲道耳機功能的 2.2-W、單聲道、類比輸入 AB 類音訊放大器

立即訂購
產品規格表

LM4863

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 3 Output power (W) 2.7 SNR (dB) 98 THD + N at 1 kHz (%) 0.3 Iq (typ) (mA) 5.8 Control interface Hardware Analog supply (min) (V) 2 Analog supply voltage (max) (V) 5.5 PSRR (dB) 67 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 3 Output power (W) 2.7 SNR (dB) 98 THD + N at 1 kHz (%) 0.3 Iq (typ) (mA) 5.8 Control interface Hardware Analog supply (min) (V) 2 Analog supply voltage (max) (V) 5.5 PSRR (dB) 67 Operating temperature range (°C) -40 to 85
WQFN (NHW) 24 20 mm² 5 x 4
  • Stereo Headphone Amplifier Mode
  • “Click and Pop” Suppression Circuitry
  • Unity-Gain Stable
  • Thermal Shutdown Protection Circuitry
  • SOIC, TSSOP, exposed-DAP TSSOP, and WQFN packages

Key Specifications

  • PO at 1% THD+N
    • LM4863LQ, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ)
    • LM4863MTE, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ)
    • LM4863MTE, 8Ω load: 1.1W(typ)
    • LM4863, 8Ω: 1.1W(typ)
  • Single-ended mode THD+N at 75mW into 32Ω: 0.5%(max)
  • Shutdown current: 0.7μA(typ)
  • Supply voltage range: 2.0V to 5.5V

All trademarks are the property of their respective owners.

  • Stereo Headphone Amplifier Mode
  • “Click and Pop” Suppression Circuitry
  • Unity-Gain Stable
  • Thermal Shutdown Protection Circuitry
  • SOIC, TSSOP, exposed-DAP TSSOP, and WQFN packages

Key Specifications

  • PO at 1% THD+N
    • LM4863LQ, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ)
    • LM4863MTE, 3Ω, 4Ω loads: 2.5W(typ), 2.2W(typ)
    • LM4863MTE, 8Ω load: 1.1W(typ)
    • LM4863, 8Ω: 1.1W(typ)
  • Single-ended mode THD+N at 75mW into 32Ω: 0.5%(max)
  • Shutdown current: 0.7μA(typ)
  • Supply voltage range: 2.0V to 5.5V

All trademarks are the property of their respective owners.

The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load or 2.5W to a 3Ω load with less than 1.0% THD+N (see below). In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones.

Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, the LM4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.

The LM4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on.

The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load or 2.5W to a 3Ω load with less than 1.0% THD+N (see below). In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones.

Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, the LM4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.

The LM4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on.
filter 尋找其它 喇叭放大器
下載

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPA2008D2 現行 具有 DC 音控和的 3-W、立體聲、類比輸入、D 類音訊放大器 This product is a Class-D audio amplifier with similar output power, does not include headphone output, and has DC gain control instead of a feedback resistor.
TPA2012D2 現行 具有可選增益的 2.1-W 立體聲類比輸入 D 類音訊放大器 This product is a Class-D audio amplifier with similar output power, does not include headphone output and has selectable gain rather than a feedback resistor.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM4863   Dual 2.2W Audio Amplifier Plus Stereo Headphone Function datasheet (Rev. F) 2013年 5月 2日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​