LM833-N
The LM833 is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems.
This dual amplifier IC utilizes new circuit and processing techniques to deliver low noise, high speed and wide bandwidth without increasing external components or decreasing stability. The LM833 is internally compensated for all closed loop gains and is therefore optimized for all preamp and high level stages in PCM and HiFi systems.
The LM833 is pin-for-pin compatible with industry standard dual operational amplifiers.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LM833-N Dual Audio Operational Amplifier datasheet (Rev. E) | 2012年 5月 18日 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
Application note | AN-346 High-Performance Audio Applications of The LM833 (Rev. D) | 2013年 5月 7日 | ||
Application note | Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B) | 2013年 4月 22日 | ||
Application note | Basic Introduction to Filters - Active, Passive, and Switched-Cap (Rev. A) | 2010年 4月 21日 | ||
Application note | AN-1002 ADC16071/ADC16471 Analog Layout and Interface Design Considerations | 2004年 5月 14日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
ANALOG-ENGINEER-CALC — 類比工程師計算機
The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 | 引腳 | 下載 |
---|---|---|
PDIP (P) | 8 | 檢視選項 |
SOIC (D) | 8 | 檢視選項 |
VSSOP (DGK) | 8 | 檢視選項 |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點