首頁 微控制器 (MCU) 與處理器 Microcontrollers 通用型 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
通用型 MCU
最新

MSPM0C1105

現行

具有 32KB 快閃記憶體、8KB SRAM、12 位元 ADC、比較器、進階定時器的 32MHz Arm® Cortex®-M0+ MCU

立即訂購
產品規格表
使用指南

MSPM0C1105

現行
立即訂購

產品詳細資料

CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 32 RAM (kByte) 8 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, RTC UART 3 Security Hardware-enforced isolation, Secure debug, Secure storage, Software IP protection Number of ADC channels 12, 13, 15, 18, 27 SPI 1 Edge AI enabled No Operating temperature range (°C) -40 to 125 Rating Catalog Operating system BareMetal (No OS) Nonvolatile memory (kByte) 32 Number of GPIOs 17, 21, 25, 29, 45 Number of I2Cs 2
CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 32 RAM (kByte) 8 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, RTC UART 3 Security Hardware-enforced isolation, Secure debug, Secure storage, Software IP protection Number of ADC channels 12, 13, 15, 18, 27 SPI 1 Edge AI enabled No Operating temperature range (°C) -40 to 125 Rating Catalog Operating system BareMetal (No OS) Nonvolatile memory (kByte) 32 Number of GPIOs 17, 21, 25, 29, 45 Number of I2Cs 2
VSSOP (DGS) 20 24.99 mm² (5.1 mm × 4.9 mm) VQFN (RGE) 24 16 mm² (4 mm × 4 mm) LQFP (PT) 48 81 mm² (9 mm × 9 mm) VQFN (RHB) 32 25 mm² (5 mm × 5 mm) VSSOP (DGS) 28 34.79 mm² (7.1 mm × 4.9 mm) NFBGA (ZCM) 48 12.25 mm² (3.5 mm × 3.5 mm) WQFN (RUK) 20 9 mm² (3 mm × 3 mm) VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 32MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 125°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 64KB of flash memory
    • 8KB of SRAM
  • High-performance analog peripherals
    • 12-bit 1.6 Msps analog-to-digital converter (ADC), up to 27 external channels
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Comparator (COMP) with 8-bit reference DAC
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 91µA/MHz (CoreMark)
    • STANDBY 2µA and SRAM and registers fully retained
    • SHUTDOWN: 68nA with I/O wake-up
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • 7-channel event fabric signaling system
    • Five timers supporting up to 18 PWM outputs, all operational down to STANDBY mode

      • One 16-bit advanced timer with deadband and the timer frequency up to 64Mhz

      • One 16-bit general purpose timer with 4 capture/compares

      • Three 16-bit general-purpose timers with 2 capture/compares
    • Window-watchdog timer (WWDT)
    • Independent watchdog timer (IWDT)
    • RTC with alarm and calendar mode
    • BEEPER generating 1/2/4/8kHz square wave to drive an external beeper
  • Communication interfaces
    • Three UART modules, with one supporting LIN, IrDA, DALI, smart card, Manchester
    • Two I2C modules supporting SMBus/PMBus and wakeup from STOP mode, supporting up to FM+ (1Mbps)

    • One SPI module supporting up to 16Mbps

  • Clock system
    • Internal 32MHz oscillator with -2.1% to 1.6% accuracy (SYSOSC)
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 32MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External Low Frequency (LF) and High Frequency (HF) digital clock inputs
    • Digital clock output
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16)
  • Flexible I/O features
    • Up to 45 total GPIOs
    • Two 5V-tolerant open-drain IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options(1)
    • 48-pin LQFP (PT), VQFN (RGZ) , NFBGA (ZCM)
    • 32-pin LQFP (VFC), VQFN (RHB)
    • 28-pin VSSOP (DGS28)
    • 24-pin VQFN (RGE)
    • 20-pin WQFN (RUK), VSSOP (DGS20)
  • Family members (also see Device Comparison)
    • MSPM0C1106: 64KB of flash, 8KB of RAM
    • MSPM0C1105: 32KB of flash, 8KB of RAM
    • MSP32G031C8: 64KB of flash, 8KB of RAM
    • MSP32G031C6: 32KB of flash, 8KB of RAM
    • MSP32C031C6: 32KB of flash, 8KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0C1106 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)

(1)32-pin LQFP (VFC) is preview
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 32MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 125°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 64KB of flash memory
    • 8KB of SRAM
  • High-performance analog peripherals
    • 12-bit 1.6 Msps analog-to-digital converter (ADC), up to 27 external channels
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Comparator (COMP) with 8-bit reference DAC
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 91µA/MHz (CoreMark)
    • STANDBY 2µA and SRAM and registers fully retained
    • SHUTDOWN: 68nA with I/O wake-up
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • 7-channel event fabric signaling system
    • Five timers supporting up to 18 PWM outputs, all operational down to STANDBY mode

      • One 16-bit advanced timer with deadband and the timer frequency up to 64Mhz

      • One 16-bit general purpose timer with 4 capture/compares

      • Three 16-bit general-purpose timers with 2 capture/compares
    • Window-watchdog timer (WWDT)
    • Independent watchdog timer (IWDT)
    • RTC with alarm and calendar mode
    • BEEPER generating 1/2/4/8kHz square wave to drive an external beeper
  • Communication interfaces
    • Three UART modules, with one supporting LIN, IrDA, DALI, smart card, Manchester
    • Two I2C modules supporting SMBus/PMBus and wakeup from STOP mode, supporting up to FM+ (1Mbps)

    • One SPI module supporting up to 16Mbps

  • Clock system
    • Internal 32MHz oscillator with -2.1% to 1.6% accuracy (SYSOSC)
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 32MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External Low Frequency (LF) and High Frequency (HF) digital clock inputs
    • Digital clock output
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16)
  • Flexible I/O features
    • Up to 45 total GPIOs
    • Two 5V-tolerant open-drain IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options(1)
    • 48-pin LQFP (PT), VQFN (RGZ) , NFBGA (ZCM)
    • 32-pin LQFP (VFC), VQFN (RHB)
    • 28-pin VSSOP (DGS28)
    • 24-pin VQFN (RGE)
    • 20-pin WQFN (RUK), VSSOP (DGS20)
  • Family members (also see Device Comparison)
    • MSPM0C1106: 64KB of flash, 8KB of RAM
    • MSPM0C1105: 32KB of flash, 8KB of RAM
    • MSP32G031C8: 64KB of flash, 8KB of RAM
    • MSP32G031C6: 32KB of flash, 8KB of RAM
    • MSP32C031C6: 32KB of flash, 8KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0C1106 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)

(1)32-pin LQFP (VFC) is preview

MSPM0C1105/6 microcontrollers (MCUs) are part of MSP’s highly integrated, ultra-low-power 32-bit MSPM0 MCU family based on the Arm Cortex-M0+ 32-bit core platform, operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.

The MSPM0C1105/6 devices provide up to 64KB embedded flash program memory with 8KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2.1% to +1.6%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.6 Msps ADC with VDD as the voltage reference, a comparator with 8-bit reference DAC and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer with deadband and timer frequency up to 64MHz, four 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including three UART, one SPI, and two I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers to find the MCU that meets the project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0C1105/6 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 C-Series Microcontrollers Technical Reference Manual.

MSPM0C1105/6 microcontrollers (MCUs) are part of MSP’s highly integrated, ultra-low-power 32-bit MSPM0 MCU family based on the Arm Cortex-M0+ 32-bit core platform, operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.

The MSPM0C1105/6 devices provide up to 64KB embedded flash program memory with 8KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2.1% to +1.6%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.6 Msps ADC with VDD as the voltage reference, a comparator with 8-bit reference DAC and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer with deadband and timer frequency up to 64MHz, four 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including three UART, one SPI, and two I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers to find the MCU that meets the project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0C1105/6 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 C-Series Microcontrollers Technical Reference Manual.
filter 尋找其它 通用型 MCU
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 72
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSPM0C1105, MSPM0C1106 Mixed-Signal Microcontrollers datasheet (Rev. B) PDF | HTML 2026/1/14
* 使用指南 MSPM0 C-Series Microcontrollers Technical Reference Manual (Rev. C) PDF | HTML 2025/4/1
* 勘誤表 MSPM0C110x Mixed-Signal Microcontrollers Errata (Rev. C) PDF | HTML 2025/10/17
應用說明 MSPM0 – ADC Attach on AM62x and AM62L using SPI (Rev. B) PDF | HTML 2026/6/17
應用說明 MSPM0 C-Series MCU Hardware Development Guide (Rev. C) PDF | HTML 2026/3/19
使用指南 MSPM0 Bootloader User's Guide (Rev. A) PDF | HTML 2026/1/8
應用說明 Cybersecurity Enablers in MSPM0 MCUs (Rev. A) PDF | HTML 2025/12/10
應用說明 EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025/12/2
應用說明 MSPM0 ADC Noise Analysis and Application (Rev. A) PDF | HTML 2025/11/14
Product overview MSPM0C1105 and MSPM0C1106: Cost-Optimized 32MHz Arm Cortex-M0+ MCU (Rev. A) PDF | HTML 2025/9/23
子系統設計 ADC to I2C (Rev. A) PDF | HTML 2025/9/10
子系統設計 ADC to UART (Rev. A) PDF | HTML 2025/9/9
應用說明 MSPM0 Bootloader Implementation (Rev. D) PDF | HTML 2025/9/4
使用指南 MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025/8/27
子系統設計 ADC to SPI (Rev. A) PDF | HTML 2025/8/27
子系統設計 Power Sequencer (Rev. A) PDF | HTML 2025/8/25
子系統設計 Parallel IO to UART Bridge (Rev. A) PDF | HTML 2025/8/21
子系統設計 5V Interface (Rev. A) PDF | HTML 2025/8/20
子系統設計 Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025/8/20
子系統設計 Function Generator Using DAC8 (Rev. A) PDF | HTML 2025/8/15
子系統設計 Task Scheduler (Rev. A) PDF | HTML 2025/8/15
子系統設計 IO Expander With SPI, I2C, and UART (Rev. A) PDF | HTML 2025/8/14
子系統設計 Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025/8/13
子系統設計 LED Driver With PWM (Rev. A) PDF | HTML 2025/8/12
子系統設計 Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025/8/6
子系統設計 Frequency Counter: Tone Detection (Rev. A) PDF | HTML 2025/8/6
子系統設計 I2C to SPI Bridge (Rev. A) PDF | HTML 2025/8/5
子系統設計 Scanning Comparator (Rev. A) PDF | HTML 2025/8/5
子系統設計 I2C to UART Subsystem Design (Rev. A) PDF | HTML 2025/8/4
子系統設計 MCU Design Techniques: ADC to PWM (Rev. A) PDF | HTML 2025/8/1
Product overview MSPM0 MCUs: More Options, Unlimited Possibilities (Rev. B) PDF | HTML 2025/6/29
應用說明 Capturing PWM 0% to 100% Duty Cycle with MSPM0 MCU PDF | HTML 2025/6/12
應用說明 BQ2562x Control Based on MSPM0 Through I2C PDF | HTML 2025/4/10
白皮書 MSPM0 MCU Advantages in Automotive Application PDF | HTML 2025/3/11
應用說明 LIN Basics and Implementation on MSPM0 PDF | HTML 2025/2/21
應用說明 Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025/2/20
使用指南 Migration Guide From NXP to MSPM0 PDF | HTML 2025/2/3
應用說明 Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025/1/29
應用說明 MSPM0G3507 Low Power Test and Guidance PDF | HTML 2024/10/18
應用說明 Understanding the MSPM0 Debug Subsystem PDF | HTML 2024/9/23
應用說明 A2L Refrigerant Standard Overview and TI Mitigation Control Board Designs for Designers PDF | HTML 2024/9/16
應用說明 How to Charge With Smart Battery Using MCU in Between to Translate SMBus/I2C PDF | HTML 2024/8/9
應用說明 BQ769x2 Control Based on MSPM0 Through I2C (Rev. A) PDF | HTML 2024/7/12
應用說明 Sensored Brushed DC Motor Control Based on MSPM0 PDF | HTML 2024/6/28
應用說明 MSPM0 Gauge L1 Solution Guide (Rev. A) PDF | HTML 2024/6/4
Application brief Automotive Seat Comfort Module Using MSPM0 PDF | HTML 2024/5/1
應用說明 PGA460 Control Based on MSPM0 for Distance Detection PDF | HTML 2024/4/17
應用說明 Realization of Password-Protected Debug Based on Software PDF | HTML 2024/3/6
應用說明 Isolated Loop Powered 4 to 20mA Field Transmitter Designs PDF | HTML 2024/2/1
技術文章 為什麼互通性對於不斷發展的電動車充電市場很重要 PDF | HTML Download English Version 2024/1/26
Product overview Realizing UWB Passive Entry Passive Start (PEPS) Design with MSPM0 MCU PDF | HTML 2024/1/12
應用說明 MSPM0 - Advanced Control Timer Helps for Better Control and Better Digital Output PDF | HTML 2024/1/10
Application brief MSPM0Cx- Toothbrush and Shaver PDF | HTML 2023/12/27
Product overview Realizing HVAC FAN Control Design with MSPM0 MCU PDF | HTML 2023/12/21
設計指南 Low-Cost Blood Pressure and Heart Rate Monitor Reference Design PDF | HTML 2023/12/19
應用說明 MSPM0 Enables Cost-Effective Field Transmitter Applications PDF | HTML 2023/12/15
Application brief Low-Cost MSPM0C MCUs as an I/O Expander PDF | HTML 2023/12/11
應用說明 Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023/10/3
Application brief Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs (Rev. A) PDF | HTML 2023/9/27
Application brief Using MSPM0 MCUs to Design Trapezoidal-Based BLDC Motor Controllers (Rev. A) PDF | HTML 2023/9/14
Application brief Optimized H-Bridge Driver Control for Stepper and BDC Motors Using MSPM0 MCUs (Rev. A) PDF | HTML 2023/9/6
應用說明 Dual-Ray Smoke Detector with the TPS8802 and MSPM0 MCUs PDF | HTML 2023/8/22
應用說明 MSPM0 Live Firmware Update (LFU) Bootloader Implementation PDF | HTML 2023/7/11
應用說明 EEPROM Emulation Type A Solution PDF | HTML 2023/4/18
應用說明 EEPROM Emulation Type B Design PDF | HTML 2023/4/11
Application brief Increasing Flexibility in Your Electrical Thermometer Designs With Low-Cost MSPM PDF | HTML 2023/3/2
Application brief Simplifying Design in True Wireless Stereo Control With a Low-Cost MSPM0 MCU PDF | HTML 2023/3/2
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023/3/2
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023/3/2
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023/3/2
應用說明 Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023/2/22
白皮書 MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023/2/22

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMC-ADC-1PH-EVM — AMC130M02 評估模組

AMC-ADC-1PH-EVM 是採用獨立隔離式多通道類比轉數位轉換器 (ADC) 的單相位電表，可對分流電流感測器取樣。此評估模組 (EVM) 可在輸入範圍 (50mA - 15A) 中達到 0.5% 準確度，且取樣率為 4kHz，並且使用 TI Arm® Cortex®-M0+ 主機微控制器 (MCU) 來計算計量參數。必要的軟體功能已內建於 MSPM0-SDK 中，並可使用 TI 的 Code Composer Studio™ 進行編譯。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

LP-MSPM0C1106 — 適用於 32-MHz Arm® Cortex®-M0+ MCU 的 MSPM0C1106 LaunchPad™ 開發套件

MSPM0C1106 LaunchPad™ 開發人員套件是一款易於使用的 MSPM0C1106 微控制器 (MCU) 評估模組。LaunchPad 開發套件包含 MSPM0C1106 微控制器平台開發所需的所有元件，內建板載偵錯探測器可進行程式設計、偵錯，以及 EnergyTrace™ 技術。該開發板還配備兩個板載按鈕、兩個 LED 指示燈，可快速整合簡易使用者介面。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

從：TASKING Germany GmbH
支援產品和硬體
硬體程式設計工具

C-GANG — 適用於獨立式與整合式快閃且快速可靠的 gang 編程解決方案

C-GANG 是一款低成本的 gang 程式設計工具，可同時編程多達六個相同的目標。本產品相容於各種 TI 微控制器，包括 MSPM0、MSP430 及 C2000 裝置。

從：Elprotronic Inc.
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
軟體開發套件 (SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

MSPM0 SDK 提供軟體、工具和文件的終極集合，可使用單一軟體套件，加速開發 MSPM0 MCU 平台的應用。

支援產品和硬體
軟體開發套件 (SDK)

MSPM0-SDK-DESIGN — Secure release for the MSPM0 Software Development Kit (SDK)

Secure release for the MSPM0 Software Development Kit (SDK)
支援產品和硬體
軟體開發套件 (SDK)

MSPM0-SDK-DESIGN — Secure release for the MSPM0 Software Development Kit (SDK)

Secure release for the MSPM0 Software Development Kit (SDK)
支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio 是一款可簡化韌體開發的視覺設計環境，並且能在數分鐘內設定、開發及執行微控制器應用程式，無須編碼，也不需要 IDE。提供獨立下載或雲端版本。

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

TSK-3P-VX-TOOLSET — 適用於 Arm 的 TASKING VX 工具套件

適用於 Arm 的 VX 工具套件是一套經過認證的編譯器工具鏈，可用於指定 Cortex-M 與 Cortex-R 核心裝置的安全關鍵嵌入式軟體開發。透過整合 Eclipse IDE、進階多核心支援，以及與 TASKING BlueBox 除錯器的相容性，VX 工具套件可簡化開發流程。通過 TÜV NORD 認證，符合 ISO 26262（最高支援 ASIL D）及 ISO 21434 標準。

從：TASKING Germany GmbH
支援產品和硬體
快速入門

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
開發模組 (EVM) 的 GUI

LP-MSPM0C1104-OOBE — Out-of-box experience GUI for LP-MSPM0C1104

Out-of-box experience GUI for LP-MSPM0C1104
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 20 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
LQFP (PT) 48 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian
VSSOP (DGS) 28 Ultra Librarian
NFBGA (ZCM) 48 Ultra Librarian
WQFN (RUK) 20 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片