THVD9491-SP
- Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
- 3V to 5.5V supply voltage
- Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply
- Total ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) up to total ionizing dose (TID) of 100krad (Si)
- Single-event effects (SEE) characterized
- Single event latch-up (SEL) immune to linear energy transfer (LET) = 75MeV⋅cm2 /mg at 125°C
- SMD# 5962R2522201PXE
- Space grade plastic (SP)
- Controlled baseline
- One assembly and test site
- One fabrication site
- Gold bond wire
- NiPdAu lead finish
- Military temp range (-55°C to 125°C)
- Extended product life cycle
- Product traceability
- Meets the NASA ASTM E595 outgassing specification
- 1.65V to 5.5V Supply for data and enable signals
- SLR Pin Selectable Data Rates:
- 20Mbps and 50Mbps
- Bus I/O protection
- ±40V DC bus fault
- ±16kV HBM ESD
- ±12kV IEC 61000-4-2 contact discharge
- ±12kV IEC 61000-4-2 air-gap discharge
- ±4kV IEC 61000-4-4 fast transient burst
- Glitch-free power-up and down for hot plug-in capability
- Open, short, and idle bus failsafe
- Thermal shutdown
- 1/8 unit load (up to 256 bus nodes)
- 14-pin SOIC package for drop-in compatibility
THVD9491-SP is a ±40V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V logic supply for data and enable logic signals, and a 3V to 5.5V bus side supply. The devices have slew rate select feature that enables the devices to be used at two maximum speeds based on the SLR pin setting
These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. Symmetric ±12V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.
The half-duplex device is available in small VSON package for space-constrained applications. The full-duplex device is available in standard 14-SOIC package.
您可能會感興趣的類似產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | THVD9491-SP Radiation-Hardened ±40V Fault-Protected 3V to 5.5V RS-485 Transceiver with Flexible I/O Supply and IEC ESD datasheet | PDF | HTML | 2026年 4月 6日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
THVD24X2VEVM — 零件評估模組 (EVM) 的 THVD24X2V 系列
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 14 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。