TIOM2212

預覽

產品詳細資料

Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
Type IO-Link Current limit (max) (A) 0.7 Features Configurable current limiter, Dual Channel, Low residual voltage, Remote wakeup, Reverse polarity protection Operating temperature range (°C) -40 to 125
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)
  • Two independent IO-Link PHY channels
    • High performance C/Q driver: 1Ω RDS(on), up to 700mA DC
    • Configurable PNP, NPN, push-pull, or IO-Link 1.1.5 compliant output supporting IEC 61131-9 COM1, COM2, and COM3
  • Integrated IO-Link frame handler simplifies board level signal routing, reducing need for UART
    • Offloads protocol-related processing from the microcontroller/processor
    • Supports up to 25MHz high-speed SPI with optional UART support
      • 1.8V to 5.5V I/O compatibility
    • Integrated diagnostics: overtemperature, overvoltage and undervoltage, C/Q & L+ overcurrent, reverse polarity
    • Hardware interrupt and reset pins
    • Integrated wake-up pulse generation and communication sequencer
    • Ready pulse detection for OSSDe compatibility
  • Integrated gate drivers for external NFETs supporting both L+ and C/Q
    • Capable of driving >4A NFETs for actuator support
    • Capable of L+ and C/Q current sense feedback to external ADC
  • Two outputs configurable to IEC61131-2 digital input channels (type 1 or type 3)
  • Robust protection on all interface pins (C/Q, DI, L+, VCC, S, G, C/QG, C/QS)
    • ±65V DC protection and ±70V transient protection
    • Reverse polarity protection (C/Q and L+)
    • Reverse current blocking (C/Q and L+)
  • 12 LED register controlled PWM drivers (6 per channel)

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.

The TIOM2212 dual channel IO-Link controller implements two independent IO-Link interfaces for industrial bidirectional, point-to-point communication with an integrated frame handler. The device can be connected to two IO-Link devices through a three-wire interface and integrates automatic wake-up pulse generation, communication sequencer, and ready pulse detection for simplified communication with IO-Link devices. The integrated frame handlers can be controlled via SPI, eliminating the need for external UARTs, but for legacy systems or non-standard frame sizes, a UART interface is available for maximum flexibility.

The TIOM2212 is designed to provide high flexibility and system-level integration for industrial automation. This device supports advanced status indications with integrated LED drivers, external NFET gate drivers for high-power L+ supply and C/Q device actuation, and configurable digital features for port synchronization and system monitoring. The device architecture also enables efficeint, high-speed SPI communication for rapid data updates and maximum system integration.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TIOM2212 Dual Channel IO-Link Master With Integrated Frame Handler, Supply Controller and Diagnostics datasheet PDF | HTML 2026/10/5
Application brief Accelerating Industrial Connectivity: Simplifying Multiprotocol Ethernet Integration with TICS100MOD PDF | HTML 2026/11/4

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TIOL221EVM — TIOL221 評估模組

TIOL221 評估模組 (EVM) 是能以針腳控制和 SPI 設定評估 TIOL221 主要功能與性能的平台。EVM 包含業界標準四針腳 M12 連接器,其採用 A 類雙通道配置,實作一個 IO-Link 通訊通道以及一個數位輸入或輸出通道。此外也提供用於裸線連接或外部負載的螺絲端子台。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
參考設計

TIDA-011034 — 高性能 IO-Link 主要模組參考設計

This reference design implements an 8-port IO-link master using four TIOM2212 IO-link master transceivers with TPS274C65 power switches, valuable across TI processors (MSPM0G3507, AM261x, AM243x) by an 80-pin BoosterPack™ interface. This reference design uses three port tiers (high, medium, (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片