首頁 介面 USB IC USB-C 功率傳輸控制器
首頁
介面
USB IC
USB-C 功率傳輸控制器
最新

TPS26750A

現行

具有 240W 擴展功率範圍的 TPS26750A USB-C 電源傳輸 3.2 控制器

立即訂購
產品規格表

TPS26750A

現行
產品規格表 立即訂購

產品詳細資料

Function Type-C Internal power path 5 V 3 A Power role DRP, Sink, Source Data role DFP, DRD, DRP Alternate mode No Dead battery support Yes External power-path control GPIO Features 20-V CC pins, BC1.2, Moisture detection, Web-based GUI Rating Catalog Operating temperature range (°C) -40 to 125
Function Type-C Internal power path 5 V 3 A Power role DRP, Sink, Source Data role DFP, DRD, DRP Alternate mode No Dead battery support Yes External power-path control GPIO Features 20-V CC pins, BC1.2, Moisture detection, Web-based GUI Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RSM) 32 16 mm² (4 mm × 4 mm)
  • This device is certified by the USB-IF for PD3.2
  • Optimized for USB Type-C PD Sink (UFP) and Dual Role Power (DRP) power applications
    • Built in I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c
  • Extended power range (EPR) with TPD4S480
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable power supply (PPS) and adjustable voltage supply (AVS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
    • Supports AVS source
  • Liquid detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power paths
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • Additional features
    • 11 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1I2C controller port
    • 1I2C target port
  • This device is certified by the USB-IF for PD3.2
  • Optimized for USB Type-C PD Sink (UFP) and Dual Role Power (DRP) power applications
    • Built in I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c
  • Extended power range (EPR) with TPD4S480
    • Supports EPR source and sink
    • EPR 28V, 36V, 48V, and AVS
  • Programmable power supply (PPS) and adjustable voltage supply (AVS)
    • Supports PPS source and sink
    • Standalone PPS source control TI battery chargers
    • Programmable interface for PPS sink
    • Supports AVS source
  • Liquid detection
    • Measures directly at the Type-C connector
    • Integrated error handling and protection
  • Integrated fully managed power paths
    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26V tolerant CC pins for robust protection when connected to non-compliant devices
  • Additional features
    • 11 configurable GPIOs
    • BC1.2 charging support
    • 3.3V LDO output for dead battery support
    • Power supply from 3.3V or VBUS source
    • 1I2C controller port
    • 1I2C target port

The TPS26750A is a highly integrated stand-alone USB Type-C and power delivery (PD) controller optimized for applications supporting USB-C PD power. The TPS26750A integrates fully managed power paths with robust protection for a complete USB-C PD application. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI creates the configuration image for the user’s application, reducing much of the complexity associated with USB PD applications.

The TPS26750A is a highly integrated stand-alone USB Type-C and power delivery (PD) controller optimized for applications supporting USB-C PD power. The TPS26750A integrates fully managed power paths with robust protection for a complete USB-C PD application. The intuitive web based GUI asks the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI creates the configuration image for the user’s application, reducing much of the complexity associated with USB PD applications.
filter 尋找其它 USB-C 功率傳輸控制器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS26750A USB Type-C and USB PD Controller With Integrated Power Switches Optimized for EPR DRP Power Applications datasheet (Rev. A) PDF | HTML 2026/7/23
使用指南 USBCPD Application Customization Tool User Guide PDF | HTML 2026/6/11
應用說明 USB-PD Auto Negotiate Sink Configurability PDF | HTML 2026/4/23

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS26750AEVM — TPS26750A 評估模組

TPS26750AEVM 評估模組可評估 SPR 和 EPR 範圍內的僅汲取、僅供電或 DRP 應用的 USB-PD。TPS26750AEVM 可在沒有電源的情況下運作，作為源極、汲極或 DRP 裝置，在 5A 時可供應高達 48V (240W)，並支援符合 USB‑PD 規格的電池充電應用。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

USBCPD-APPLICATION-CUSTOMIZATION-TOOL — 適用於 TI USB-C PD 控制器的應用自訂工具

USBCPD-APPLICATION-CUSTOMIZATION-TOOL 可啟用特定應用裝置配置和特定 USB 電源傳輸控制器編程。GUI 與對應的硬體評估模組 (EVM) 相容，以及使用產生的應用配置輸出檔案之自訂硬體設計。

支援產品和硬體
設計工具

TPS2X7XX-SCHEMATIC-CHECKLIST — Schematic checklist for TPS2X7XX USB-PD devices

A detailed checklist to apply to TPS2X7XX USB-PD devices to ensure application meets best datasheet recommendations for components.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSM) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片