首頁 射頻 (RF) 與微波 射頻放大器 RF 全差動放大器 (FDA)
首頁
射頻 (RF) 與微波
射頻放大器
RF 全差動放大器 (FDA)
最新

TRF0108-SEP

現行

Radiation-tolerant, near-DC to 12GHz, differential to single-ended (D2S) RF amplifier

立即訂購
產品規格表

TRF0108-SEP

現行
產品規格表 立即訂購

產品詳細資料

Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.2, 15.5 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 27 P1dB (typ) (dBm) 11.4 Frequency of harmonic distortion measurement (GHz) 2 3rd harmonic (dBc) -50 OIP2 (typ) (dBm) 43 2nd harmonic (dBc) -49 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (rad) 30000
Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.2, 15.5 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 27 P1dB (typ) (dBm) 11.4 Frequency of harmonic distortion measurement (GHz) 2 3rd harmonic (dBc) -50 OIP2 (typ) (dBm) 43 2nd harmonic (dBc) -49 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (rad) 30000
— (—) — See data sheet
  • Vendor item drawing number: VID V62/26604
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA
  • Vendor item drawing number: VID V62/26604
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA

The TRF0108-SEP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SEP or AFE7950-SEP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SEP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.

The TRF0108-SEP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SEP or AFE7950-SEP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SEP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.
filter 尋找其它 RF 全差動放大器 (FDA)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TRF0108-SEP Radiation-Tolerant, Near-DC to 12GHz, Differential to Single-Ended RF Amplifier datasheet PDF | HTML 2025/12/23
* 輻射及可靠性報告 TRF0108-SEP Single-Event Effects (SEE) Radiation Report PDF | HTML 2026/3/30
* 輻射及可靠性報告 TRF0108-SEP Total Ionizing Dose (TID) Report 2026/3/30
選擇指南 TI Space Products (Rev. L) 2026/3/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TRF0108SEP-EVM — TRF0108SEP/SP 評估模組

TRF0108SP 與 TRF0108SEP 評估模組 (EVM) 分別用於評估 TRF0108-SP 與 TRF0108-SEP 裝置，兩者皆為差動輸入轉單端 (D2S) 輸出的 RF 放大器。TRF0108SP-EVM 通過抗輻射保證 (RHA) 認證，而 TRF0108SEP-EVM 則具備耐輻射能力。這些裝置專為需要由數位類比轉換器 (DAC) 驅動並執行 D2S 功能的應用而設計。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TRF0108-SEP S-Parameter Model

SLOM539.ZIP (8 KB) - S 參數模型
支援產品和硬體
計算工具

RF-CASCADE-CALC-TOOL — TI RF 級聯計算機

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
支援產品和硬體
參考設計

TIDA-010274 — 航太級離散式 RF 取樣收發器參考設計

此參考設計整合了一個 10 GSPS 雙數位轉類比轉換器和一個 5 GSPS 雙類比轉數位轉換器，RF 介面上有主動式平衡不平衡轉換器，支援 X 頻帶。此設計還整合了航太級時脈子卡和航太級電源解決方案子卡。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
— (—) —
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片