The CC2533 is an optimized system-on-chip (SoC) solution for IEEE 802.15.4 based remote-control systems. It enables single-chip remote controls to be built with low bill-of-material cost when used as a flexible SoC. It also provides a simple path to adding RF4CE capability to a device or target when used in the wireless network processor configuration of the RemoTI RF4CE stack. Robust network nodes can be built with very low total bill-of-material costs.
The CC2533 combines the excellent performance of a leading RF transceiver with a single-cycle 8051 compliant CPU, up to 96-KB in-system programmable flash memory, up to 6-KB RAM, and many other powerful features. The CC2533 has efficient power modes with RAM and register retention below 1 µA, making it highly suited for low-duty-cycle systems where ultralow power consumption is required. Short transition times between operating modes further ensure low energy consumption.
Combined with the golden-unit-status RemoTI stack from Texas Instruments, the CC2533 provides a robust and complete ZigBee RF4CE remote-control solution. It is also ideal for implementing the target side of a remote-control system in a network processor configuration with an SPI/UART/I2C interface. The CC2533 comes complete with reference designs and example software that implement a remote control system to ensure efficient design-in.
The CC2533 exists in three memory-size configurations:
CC2533F32 – 32-KB Flash, 4-KB RAM
CC2533F64 – 64-KB Flash, 4-KB RAM
CC2533F96 – 96-KB Flash, 6-KB RAM
|RAM size (KB)|
|TX Power (dBm)|
|Sensitivity (Best) (dBm)|
|Standby Power (LPM3-uA)|
|AES 128 Bit Hardware Encryption|
|Estimated Package Size (WxL) (mm2)|
|RX Current (Lowest) (mA)|
|Wakeup Time (PD-->RX/TX) (us)|
|Up to 96||Up to 256||Up to 256|
| 4 |
|40VQFN: 36 mm2: 6 x 6||40VQFN: 36 mm2: 6 x 6||40VQFN: 36 mm2: 6 x 6|
|Wireless MCU||Wireless MCU||Wireless MCU|
|Sample & Buy||Sample & Buy||Sample & Buy|